[PATCH 2/2] clk: tegra: Always program PLL_E when enabled

[Thierry Reding <thierry.reding@gmail.com>]

From: Thierry Reding <treding@nvidia.com>

Commit bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs")
added checks to avoid enabling PLLs that have already been enabled by
the bootloader. However, the PLL_E configuration inherited from the
bootloader isn't necessarily the one that is needed for the kernel.

This can cause SATA to fail like this:

    [    5.310270] phy phy-sata.6: phy poweron failed --> -110
    [    5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110
    [    5.323022] tegra-ahci: probe of 70027000.sata failed with error -110

Fix this by always programming the PLL_E. This ensures that any mis-
configuration by the bootloader will be overwritten by the kernel.

Fixes: bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/clk/tegra/clk-pll.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 583d2ac61e9e..b2d39a66f0fa 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -1601,9 +1601,6 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw)
 	unsigned long flags = 0;
 	unsigned long input_rate;
 
-	if (clk_pll_is_enabled(hw))
-		return 0;
-
 	input_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
 
 	if (_get_table_rate(hw, &sel, pll->params->fixed_rate, input_rate))
-- 
2.24.1