From: "周琰杰 (Zhou Yanjie)" <zhouyanjie@wanyeetech.com>
To: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, sboyd@kernel.org,
paul@crapouillou.net, mturquette@baylibre.com,
dongsheng.qiu@ingenic.com, aric.pzqi@ingenic.com,
rick.tyliu@ingenic.com, yanfei.li@ingenic.com,
sernia.zhou@foxmail.com, zhenwenjin@gmail.com
Subject: [PATCH v2 2/3] clk: JZ4780: Reformat the code to align it.
Date: Mon, 29 Jun 2020 01:15:42 +0800 [thread overview]
Message-ID: <20200628171543.51478-3-zhouyanjie@wanyeetech.com> (raw)
In-Reply-To: <20200628171543.51478-1-zhouyanjie@wanyeetech.com>
Reformat the code (add one level of indentation before the values),
to align the code in the macro definition section.
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
---
Notes:
v2:
New patch.
drivers/clk/ingenic/jz4780-cgu.c | 90 ++++++++++++++++++++--------------------
1 file changed, 45 insertions(+), 45 deletions(-)
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index e2e43bfe9697..20d6d5adfe8a 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -20,50 +20,50 @@
/* CGU register offsets */
#define CGU_REG_CLOCKCONTROL 0x00
-#define CGU_REG_LCR 0x04
-#define CGU_REG_APLL 0x10
-#define CGU_REG_MPLL 0x14
-#define CGU_REG_EPLL 0x18
-#define CGU_REG_VPLL 0x1c
-#define CGU_REG_CLKGR0 0x20
-#define CGU_REG_OPCR 0x24
-#define CGU_REG_CLKGR1 0x28
-#define CGU_REG_DDRCDR 0x2c
-#define CGU_REG_VPUCDR 0x30
-#define CGU_REG_USBPCR 0x3c
-#define CGU_REG_USBRDT 0x40
-#define CGU_REG_USBVBFIL 0x44
-#define CGU_REG_USBPCR1 0x48
-#define CGU_REG_LP0CDR 0x54
-#define CGU_REG_I2SCDR 0x60
-#define CGU_REG_LP1CDR 0x64
-#define CGU_REG_MSC0CDR 0x68
-#define CGU_REG_UHCCDR 0x6c
-#define CGU_REG_SSICDR 0x74
-#define CGU_REG_CIMCDR 0x7c
-#define CGU_REG_PCMCDR 0x84
-#define CGU_REG_GPUCDR 0x88
-#define CGU_REG_HDMICDR 0x8c
-#define CGU_REG_MSC1CDR 0xa4
-#define CGU_REG_MSC2CDR 0xa8
-#define CGU_REG_BCHCDR 0xac
-#define CGU_REG_CLOCKSTATUS 0xd4
+#define CGU_REG_LCR 0x04
+#define CGU_REG_APLL 0x10
+#define CGU_REG_MPLL 0x14
+#define CGU_REG_EPLL 0x18
+#define CGU_REG_VPLL 0x1c
+#define CGU_REG_CLKGR0 0x20
+#define CGU_REG_OPCR 0x24
+#define CGU_REG_CLKGR1 0x28
+#define CGU_REG_DDRCDR 0x2c
+#define CGU_REG_VPUCDR 0x30
+#define CGU_REG_USBPCR 0x3c
+#define CGU_REG_USBRDT 0x40
+#define CGU_REG_USBVBFIL 0x44
+#define CGU_REG_USBPCR1 0x48
+#define CGU_REG_LP0CDR 0x54
+#define CGU_REG_I2SCDR 0x60
+#define CGU_REG_LP1CDR 0x64
+#define CGU_REG_MSC0CDR 0x68
+#define CGU_REG_UHCCDR 0x6c
+#define CGU_REG_SSICDR 0x74
+#define CGU_REG_CIMCDR 0x7c
+#define CGU_REG_PCMCDR 0x84
+#define CGU_REG_GPUCDR 0x88
+#define CGU_REG_HDMICDR 0x8c
+#define CGU_REG_MSC1CDR 0xa4
+#define CGU_REG_MSC2CDR 0xa8
+#define CGU_REG_BCHCDR 0xac
+#define CGU_REG_CLOCKSTATUS 0xd4
/* bits within the OPCR register */
-#define OPCR_SPENDN0 BIT(7)
-#define OPCR_SPENDN1 BIT(6)
+#define OPCR_SPENDN0 BIT(7)
+#define OPCR_SPENDN1 BIT(6)
/* bits within the USBPCR register */
-#define USBPCR_USB_MODE BIT(31)
+#define USBPCR_USB_MODE BIT(31)
#define USBPCR_IDPULLUP_MASK (0x3 << 28)
-#define USBPCR_COMMONONN BIT(25)
-#define USBPCR_VBUSVLDEXT BIT(24)
+#define USBPCR_COMMONONN BIT(25)
+#define USBPCR_VBUSVLDEXT BIT(24)
#define USBPCR_VBUSVLDEXTSEL BIT(23)
-#define USBPCR_POR BIT(22)
-#define USBPCR_SIDDQ BIT(21)
-#define USBPCR_OTG_DISABLE BIT(20)
+#define USBPCR_POR BIT(22)
+#define USBPCR_SIDDQ BIT(21)
+#define USBPCR_OTG_DISABLE BIT(20)
#define USBPCR_COMPDISTUNE_MASK (0x7 << 17)
-#define USBPCR_OTGTUNE_MASK (0x7 << 14)
+#define USBPCR_OTGTUNE_MASK (0x7 << 14)
#define USBPCR_SQRXTUNE_MASK (0x7 << 11)
#define USBPCR_TXFSLSTUNE_MASK (0xf << 7)
#define USBPCR_TXPREEMPHTUNE BIT(6)
@@ -81,13 +81,13 @@
#define USBPCR1_REFCLKDIV_48 (0x2 << USBPCR1_REFCLKDIV_SHIFT)
#define USBPCR1_REFCLKDIV_24 (0x1 << USBPCR1_REFCLKDIV_SHIFT)
#define USBPCR1_REFCLKDIV_12 (0x0 << USBPCR1_REFCLKDIV_SHIFT)
-#define USBPCR1_USB_SEL BIT(28)
-#define USBPCR1_WORD_IF0 BIT(19)
-#define USBPCR1_WORD_IF1 BIT(18)
+#define USBPCR1_USB_SEL BIT(28)
+#define USBPCR1_WORD_IF0 BIT(19)
+#define USBPCR1_WORD_IF1 BIT(18)
/* bits within the USBRDT register */
-#define USBRDT_VBFIL_LD_EN BIT(25)
-#define USBRDT_USBRDT_MASK 0x7fffff
+#define USBRDT_VBFIL_LD_EN BIT(25)
+#define USBRDT_USBRDT_MASK 0x7fffff
/* bits within the USBVBFIL register */
#define USBVBFIL_IDDIGFIL_SHIFT 16
@@ -95,11 +95,11 @@
#define USBVBFIL_USBVBFIL_MASK (0xffff)
/* bits within the LCR register */
-#define LCR_PD_SCPU BIT(31)
-#define LCR_SCPUS BIT(27)
+#define LCR_PD_SCPU BIT(31)
+#define LCR_SCPUS BIT(27)
/* bits within the CLKGR1 register */
-#define CLKGR1_CORE1 BIT(15)
+#define CLKGR1_CORE1 BIT(15)
static struct ingenic_cgu *cgu;
--
2.11.0
next prev parent reply other threads:[~2020-06-28 17:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-28 17:15 [PATCH v2 0/3] Add functions to operate USB PHY related clock 周琰杰 (Zhou Yanjie)
2020-06-28 17:15 ` [PATCH v2 1/3] clk: JZ4780: Add functions for enable and disable USB PHY 周琰杰 (Zhou Yanjie)
2020-06-29 9:28 ` kernel test robot
2020-06-28 17:15 ` 周琰杰 (Zhou Yanjie) [this message]
2020-06-28 17:15 ` [PATCH v2 3/3] clk: X1000: Add support for calculat REFCLK of " 周琰杰 (Zhou Yanjie)
2020-06-29 10:26 ` kernel test robot
2020-06-29 13:20 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200628171543.51478-3-zhouyanjie@wanyeetech.com \
--to=zhouyanjie@wanyeetech.com \
--cc=aric.pzqi@ingenic.com \
--cc=dongsheng.qiu@ingenic.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=paul@crapouillou.net \
--cc=rick.tyliu@ingenic.com \
--cc=sboyd@kernel.org \
--cc=sernia.zhou@foxmail.com \
--cc=yanfei.li@ingenic.com \
--cc=zhenwenjin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).