From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Deepak Katragadda <dkatraga@codeaurora.org>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK),
linux-kernel@vger.kernel.org (open list),
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Taniya Das <tdas@codeaurora.org>, Vinod Koul <vkoul@kernel.org>
Subject: [RESEND PATCH v2 00/13] Enable GPU for SM8150 and SM8250
Date: Mon, 29 Jun 2020 17:17:06 -0400 [thread overview]
Message-ID: <20200629211725.2592-1-jonathan@marek.ca> (raw)
This series adds the missing clock drivers and dts nodes to enable
the GPU on both SM8150 and SM8250.
Note an extra patch [1] is still required for GPU to work on SM8250.
Changes in V2:
* Added "clk: qcom: gcc: fix sm8150 GPU and NPU clocks" to fix the newly added
SM8150 GPU gcc clocks
* Added "Fixes:" tag to "clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL"
* Added yaml schemas to gpucc dt-bindings patches
* Added "clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers" and changed
gpucc patches to use it.
* Removed CLK_IS_CRITICAL from gpu_cc_ahb_clk
* Added missing rpmh regulator level for sm8250 GPU clock levels
* Use sm8150/sm8250 iommu compatibles in dts
* Add gcc_gpu_gpll0_clk_src/gcc_gpu_gpll0_div_clk_src to gpucc clocks in dts
[1] https://gist.github.com/flto/784f1aca761ebf2fe6c105719a4a04ca
Jonathan Marek (13):
clk: qcom: gcc: fix sm8150 GPU and NPU clocks
clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL
clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid
clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll
clk: qcom: gcc: remove unnecessary vco_table from SM8150
dt-bindings: clock: Introduce SM8150 QCOM Graphics clock bindings
dt-bindings: clock: Introduce SM8250 QCOM Graphics clock bindings
clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers
clk: qcom: Add graphics clock controller driver for SM8150
clk: qcom: Add graphics clock controller driver for SM8250
dt-bindings: power: Add missing rpmpd rpmh regulator level
arm64: dts: qcom: add sm8150 GPU nodes
arm64: dts: qcom: add sm8250 GPU nodes
.../bindings/clock/qcom,sm8150-gpucc.yaml | 74 +++
.../bindings/clock/qcom,sm8250-gpucc.yaml | 74 +++
arch/arm64/boot/dts/qcom/sm8150.dtsi | 136 ++++++
arch/arm64/boot/dts/qcom/sm8250.dtsi | 143 ++++++
drivers/clk/qcom/Kconfig | 16 +
drivers/clk/qcom/Makefile | 2 +
drivers/clk/qcom/clk-alpha-pll.c | 70 ++-
drivers/clk/qcom/clk-alpha-pll.h | 15 +-
drivers/clk/qcom/gcc-sm8150.c | 26 +-
drivers/clk/qcom/gdsc.c | 25 +
drivers/clk/qcom/gdsc.h | 1 +
drivers/clk/qcom/gpucc-sc7180.c | 27 +-
drivers/clk/qcom/gpucc-sdm845.c | 27 +-
drivers/clk/qcom/gpucc-sm8150.c | 421 ++++++++++++++++
drivers/clk/qcom/gpucc-sm8250.c | 450 ++++++++++++++++++
include/dt-bindings/clock/qcom,gpucc-sm8150.h | 40 ++
include/dt-bindings/clock/qcom,gpucc-sm8250.h | 40 ++
include/dt-bindings/power/qcom-rpmpd.h | 1 +
18 files changed, 1479 insertions(+), 109 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8150-gpucc.yaml
create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8250-gpucc.yaml
create mode 100644 drivers/clk/qcom/gpucc-sm8150.c
create mode 100644 drivers/clk/qcom/gpucc-sm8250.c
create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8150.h
create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8250.h
--
2.26.1
next reply other threads:[~2020-06-29 21:20 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-29 21:17 Jonathan Marek [this message]
2020-06-29 21:17 ` [RESEND PATCH v2 01/13] clk: qcom: gcc: fix sm8150 GPU and NPU clocks Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 02/13] clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 03/13] clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 04/13] clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 05/13] clk: qcom: gcc: remove unnecessary vco_table from SM8150 Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 06/13] dt-bindings: clock: Introduce SM8150 QCOM Graphics clock bindings Jonathan Marek
2020-07-02 20:43 ` Rob Herring
2020-07-02 20:44 ` Rob Herring
2020-06-29 21:17 ` [RESEND PATCH v2 07/13] dt-bindings: clock: Introduce SM8250 " Jonathan Marek
2020-07-02 20:46 ` Rob Herring
2020-07-02 20:49 ` Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 08/13] clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 09/13] clk: qcom: Add graphics clock controller driver for SM8150 Jonathan Marek
2020-06-29 21:17 ` [RESEND PATCH v2 10/13] clk: qcom: Add graphics clock controller driver for SM8250 Jonathan Marek
2020-07-03 15:03 ` [RESEND PATCH v2 00/13] Enable GPU for SM8150 and SM8250 Dmitry Baryshkov
2020-07-03 15:08 ` Jonathan Marek
2020-07-03 15:14 ` Dmitry Baryshkov
2020-07-03 17:29 ` Dmitry Baryshkov
2020-07-05 21:08 ` Jonathan Marek
2020-07-06 10:28 ` Dmitry Baryshkov
2020-07-06 19:50 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200629211725.2592-1-jonathan@marek.ca \
--to=jonathan@marek.ca \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dkatraga@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tdas@codeaurora.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).