Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH V4 1/3] dt-bindings: mmc: Convert imx esdhc to json-schema
@ 2020-06-18  3:22 Anson Huang
  2020-06-18  3:22 ` [PATCH V4 2/3] dt-bindings: clock: Correct mmc node name in i.MX35 binding Anson Huang
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: Anson Huang @ 2020-06-18  3:22 UTC (permalink / raw)
  To: mturquette, sboyd, robh+dt, shawnguo, s.hauer, kernel, festevam,
	ulf.hansson, s.trumtrar, aisheng.dong, linux-clk, devicetree,
	linux-arm-kernel, linux-kernel, linux-mmc
  Cc: Linux-imx

Convert the i.MX ESDHC binding to DT schema format using json-schema

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 .../devicetree/bindings/mmc/fsl-imx-esdhc.txt      |  67 -----------
 .../devicetree/bindings/mmc/fsl-imx-esdhc.yaml     | 124 +++++++++++++++++++++
 2 files changed, 124 insertions(+), 67 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
 create mode 100644 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml

diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
deleted file mode 100644
index de1b8bd..0000000
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
-
-The Enhanced Secure Digital Host Controller on Freescale i.MX family
-provides an interface for MMC, SD, and SDIO types of memory cards.
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
-
-Required properties:
-- compatible : Should be "fsl,<chip>-esdhc", the supported chips include
-	       "fsl,imx25-esdhc"
-	       "fsl,imx35-esdhc"
-	       "fsl,imx51-esdhc"
-	       "fsl,imx53-esdhc"
-	       "fsl,imx6q-usdhc"
-	       "fsl,imx6sl-usdhc"
-	       "fsl,imx6sx-usdhc"
-	       "fsl,imx6ull-usdhc"
-	       "fsl,imx7d-usdhc"
-	       "fsl,imx7ulp-usdhc"
-	       "fsl,imx8mq-usdhc"
-	       "fsl,imx8mm-usdhc"
-	       "fsl,imx8mn-usdhc"
-	       "fsl,imx8mp-usdhc"
-	       "fsl,imx8qm-usdhc"
-	       "fsl,imx8qxp-usdhc"
-
-Optional properties:
-- fsl,wp-controller : Indicate to use controller internal write protection
-- fsl,delay-line : Specify the number of delay cells for override mode.
-  This is used to set the clock delay for DLL(Delay Line) on override mode
-  to select a proper data sampling window in case the clock quality is not good
-  due to signal path is too long on the board. Please refer to eSDHC/uSDHC
-  chapter, DLL (Delay Line) section in RM for details.
-- voltage-ranges : Specify the voltage range in case there are software
-  transparent level shifters on the outputs of the controller. Two cells are
-  required, first cell specifies minimum slot voltage (mV), second cell
-  specifies maximum slot voltage (mV). Several ranges could be specified.
-- fsl,tuning-start-tap: Specify the start dealy cell point when send first CMD19
-  in tuning procedure.
-- fsl,tuning-step: Specify the increasing delay cell steps in tuning procedure.
-  The uSDHC use one delay cell as default increasing step to do tuning process.
-  This property allows user to change the tuning step to more than one delay
-  cells which is useful for some special boards or cards when the default
-  tuning step can't find the proper delay window within limited tuning retries.
-- fsl,strobe-dll-delay-target: Specify the strobe dll control slave delay target.
-  This delay target programming host controller loopback read clock, and this
-  property allows user to change the delay target for the strobe input read clock.
-  If not use this property, driver default set the delay target to value 7.
-  Only eMMC HS400 mode need to take care of this property.
-
-Examples:
-
-esdhc@70004000 {
-	compatible = "fsl,imx51-esdhc";
-	reg = <0x70004000 0x4000>;
-	interrupts = <1>;
-	fsl,wp-controller;
-};
-
-esdhc@70008000 {
-	compatible = "fsl,imx51-esdhc";
-	reg = <0x70008000 0x4000>;
-	interrupts = <2>;
-	cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
-	wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
-};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
new file mode 100644
index 0000000..75dc116
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+
+description: |
+  The Enhanced Secure Digital Host Controller on Freescale i.MX family
+  provides an interface for MMC, SD, and SDIO types of memory cards.
+
+  This file documents differences between the core properties described
+  by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx25-esdhc
+      - fsl,imx35-esdhc
+      - fsl,imx51-esdhc
+      - fsl,imx53-esdhc
+      - fsl,imx6q-usdhc
+      - fsl,imx6sl-usdhc
+      - fsl,imx6sx-usdhc
+      - fsl,imx6ull-usdhc
+      - fsl,imx7d-usdhc
+      - fsl,imx7ulp-usdhc
+      - fsl,imx8mq-usdhc
+      - fsl,imx8mm-usdhc
+      - fsl,imx8mn-usdhc
+      - fsl,imx8mp-usdhc
+      - fsl,imx8qm-usdhc
+      - fsl,imx8qxp-usdhc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,wp-controller:
+    description: |
+      boolean, if present, indicate to use controller internal write protection.
+    type: boolean
+
+  fsl,delay-line:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify the number of delay cells for override mode.
+      This is used to set the clock delay for DLL(Delay Line) on override mode
+      to select a proper data sampling window in case the clock quality is not good
+      due to signal path is too long on the board. Please refer to eSDHC/uSDHC
+      chapter, DLL (Delay Line) section in RM for details.
+    default: 0
+
+  voltage-ranges:
+    $ref: '/schemas/types.yaml#/definitions/uint32-matrix'
+    description: |
+      Specify the voltage range in case there are software transparent level
+      shifters on the outputs of the controller. Two cells are required, first
+      cell specifies minimum slot voltage (mV), second cell specifies maximum
+      slot voltage (mV).
+    items:
+      items:
+        - description: value for minimum slot voltage
+        - description: value for maximum slot voltage
+    maxItems: 1
+
+  fsl,tuning-start-tap:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify the start delay cell point when send first CMD19 in tuning procedure.
+    default: 0
+
+  fsl,tuning-step:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify the increasing delay cell steps in tuning procedure.
+      The uSDHC use one delay cell as default increasing step to do tuning process.
+      This property allows user to change the tuning step to more than one delay
+      cells which is useful for some special boards or cards when the default
+      tuning step can't find the proper delay window within limited tuning retries.
+    default: 0
+
+  fsl,strobe-dll-delay-target:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify the strobe dll control slave delay target.
+      This delay target programming host controller loopback read clock, and this
+      property allows user to change the delay target for the strobe input read clock.
+      If not use this property, driver default set the delay target to value 7.
+      Only eMMC HS400 mode need to take care of this property.
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@70004000 {
+        compatible = "fsl,imx51-esdhc";
+        reg = <0x70004000 0x4000>;
+        interrupts = <1>;
+        fsl,wp-controller;
+    };
+
+    mmc@70008000 {
+        compatible = "fsl,imx51-esdhc";
+        reg = <0x70008000 0x4000>;
+        interrupts = <2>;
+        cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
+        wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
+    };
-- 
2.7.4


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH V4 2/3] dt-bindings: clock: Correct mmc node name in i.MX35 binding
  2020-06-18  3:22 [PATCH V4 1/3] dt-bindings: mmc: Convert imx esdhc to json-schema Anson Huang
@ 2020-06-18  3:22 ` Anson Huang
  2020-06-29 22:24   ` Rob Herring
  2020-06-18  3:22 ` [PATCH V4 3/3] dt-bindings: clock: Correct example in i.MX8QXP LPCG binding Anson Huang
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 8+ messages in thread
From: Anson Huang @ 2020-06-18  3:22 UTC (permalink / raw)
  To: mturquette, sboyd, robh+dt, shawnguo, s.hauer, kernel, festevam,
	ulf.hansson, s.trumtrar, aisheng.dong, linux-clk, devicetree,
	linux-arm-kernel, linux-kernel, linux-mmc
  Cc: Linux-imx

Nodename should be "mmc" instead of "esdhc" in i.MX35 clock binding
to avoid below build error:

Documentation/devicetree/bindings/clock/imx35-clock.example.dt.yaml:
esdhc@53fb4000: $nodename:0: 'esdhc@53fb4000' does not match '^mmc(@.*)?$'

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
New patch, to fix build error when patch #1 is added.
---
 Documentation/devicetree/bindings/clock/imx35-clock.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
index bd871da..3e20cca 100644
--- a/Documentation/devicetree/bindings/clock/imx35-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
@@ -130,7 +130,7 @@ examples:
         #clock-cells = <1>;
     };
 
-    esdhc@53fb4000 {
+    mmc@53fb4000 {
         compatible = "fsl,imx35-esdhc";
         reg = <0x53fb4000 0x4000>;
         interrupts = <7>;
-- 
2.7.4


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH V4 3/3] dt-bindings: clock: Correct example in i.MX8QXP LPCG binding
  2020-06-18  3:22 [PATCH V4 1/3] dt-bindings: mmc: Convert imx esdhc to json-schema Anson Huang
  2020-06-18  3:22 ` [PATCH V4 2/3] dt-bindings: clock: Correct mmc node name in i.MX35 binding Anson Huang
@ 2020-06-18  3:22 ` Anson Huang
  2020-06-29 22:05   ` Rob Herring
  2020-06-29 22:25   ` Rob Herring
  2020-06-29 21:48 ` [PATCH V4 1/3] dt-bindings: mmc: Convert imx esdhc to json-schema Rob Herring
  2020-06-29 22:24 ` Rob Herring
  3 siblings, 2 replies; 8+ messages in thread
From: Anson Huang @ 2020-06-18  3:22 UTC (permalink / raw)
  To: mturquette, sboyd, robh+dt, shawnguo, s.hauer, kernel, festevam,
	ulf.hansson, s.trumtrar, aisheng.dong, linux-clk, devicetree,
	linux-arm-kernel, linux-kernel, linux-mmc
  Cc: Linux-imx

In i.MX8QXP LPCG binding's example, "fsl,imx7d-usdhc" as fallback
compatible is incorrect, remove it to avoid below build error:

Documentation/devicetree/bindings/clock/imx8qxp-lpcg.example.dt.yaml:
mmc@5b010000: compatible: Additional items are not allowed ('fsl,imx7d-usdhc' was unexpected)
Documentation/devicetree/bindings/clock/imx8qxp-lpcg.example.dt.yaml:
mmc@5b010000: compatible: ['fsl,imx8qxp-usdhc', 'fsl,imx7d-usdhc'] is too long

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
New patch, to fix build error when patch #1 is added.
---
 Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
index 33f3010..1d5e9bc 100644
--- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
@@ -62,7 +62,7 @@ examples:
     };
 
     mmc@5b010000 {
-        compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+        compatible = "fsl,imx8qxp-usdhc";
         interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
         reg = <0x5b010000 0x10000>;
         clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
-- 
2.7.4


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH V4 1/3] dt-bindings: mmc: Convert imx esdhc to json-schema
  2020-06-18  3:22 [PATCH V4 1/3] dt-bindings: mmc: Convert imx esdhc to json-schema Anson Huang
  2020-06-18  3:22 ` [PATCH V4 2/3] dt-bindings: clock: Correct mmc node name in i.MX35 binding Anson Huang
  2020-06-18  3:22 ` [PATCH V4 3/3] dt-bindings: clock: Correct example in i.MX8QXP LPCG binding Anson Huang
@ 2020-06-29 21:48 ` Rob Herring
  2020-06-29 22:24 ` Rob Herring
  3 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2020-06-29 21:48 UTC (permalink / raw)
  To: Anson Huang
  Cc: mturquette, ulf.hansson, sboyd, aisheng.dong, linux-clk,
	festevam, s.hauer, robh+dt, s.trumtrar, devicetree, shawnguo,
	linux-arm-kernel, kernel, linux-kernel, linux-mmc, Linux-imx

On Thu, 18 Jun 2020 11:22:56 +0800, Anson Huang wrote:
> Convert the i.MX ESDHC binding to DT schema format using json-schema
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> No change.
> ---
>  .../devicetree/bindings/mmc/fsl-imx-esdhc.txt      |  67 -----------
>  .../devicetree/bindings/mmc/fsl-imx-esdhc.yaml     | 124 +++++++++++++++++++++
>  2 files changed, 124 insertions(+), 67 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
>  create mode 100644 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.example.dt.yaml: mmc@5b010000: compatible: Additional items are not allowed ('fsl,imx7d-usdhc' was unexpected)
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.example.dt.yaml: mmc@5b010000: compatible: ['fsl,imx8qxp-usdhc', 'fsl,imx7d-usdhc'] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/imx35-clock.example.dt.yaml: esdhc@53fb4000: $nodename:0: 'esdhc@53fb4000' does not match '^mmc(@.*)?$'


See https://patchwork.ozlabs.org/patch/1311722

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH V4 3/3] dt-bindings: clock: Correct example in i.MX8QXP LPCG binding
  2020-06-18  3:22 ` [PATCH V4 3/3] dt-bindings: clock: Correct example in i.MX8QXP LPCG binding Anson Huang
@ 2020-06-29 22:05   ` Rob Herring
  2020-06-29 22:25   ` Rob Herring
  1 sibling, 0 replies; 8+ messages in thread
From: Rob Herring @ 2020-06-29 22:05 UTC (permalink / raw)
  To: Anson Huang
  Cc: mturquette, sboyd, shawnguo, s.hauer, kernel, festevam,
	ulf.hansson, s.trumtrar, aisheng.dong, linux-clk, devicetree,
	linux-arm-kernel, linux-kernel, linux-mmc, Linux-imx

On Thu, Jun 18, 2020 at 11:22:58AM +0800, Anson Huang wrote:
> In i.MX8QXP LPCG binding's example, "fsl,imx7d-usdhc" as fallback
> compatible is incorrect, remove it to avoid below build error:
> 
> Documentation/devicetree/bindings/clock/imx8qxp-lpcg.example.dt.yaml:
> mmc@5b010000: compatible: Additional items are not allowed ('fsl,imx7d-usdhc' was unexpected)
> Documentation/devicetree/bindings/clock/imx8qxp-lpcg.example.dt.yaml:
> mmc@5b010000: compatible: ['fsl,imx8qxp-usdhc', 'fsl,imx7d-usdhc'] is too long
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> New patch, to fix build error when patch #1 is added.

So, patch 1 should come last. I'll re-order when applying.

Rob

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH V4 1/3] dt-bindings: mmc: Convert imx esdhc to json-schema
  2020-06-18  3:22 [PATCH V4 1/3] dt-bindings: mmc: Convert imx esdhc to json-schema Anson Huang
                   ` (2 preceding siblings ...)
  2020-06-29 21:48 ` [PATCH V4 1/3] dt-bindings: mmc: Convert imx esdhc to json-schema Rob Herring
@ 2020-06-29 22:24 ` Rob Herring
  3 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2020-06-29 22:24 UTC (permalink / raw)
  To: Anson Huang
  Cc: aisheng.dong, devicetree, linux-mmc, Linux-imx, linux-kernel,
	linux-arm-kernel, ulf.hansson, s.trumtrar, shawnguo, sboyd,
	festevam, linux-clk, kernel, mturquette, robh+dt, s.hauer

On Thu, 18 Jun 2020 11:22:56 +0800, Anson Huang wrote:
> Convert the i.MX ESDHC binding to DT schema format using json-schema
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> No change.
> ---
>  .../devicetree/bindings/mmc/fsl-imx-esdhc.txt      |  67 -----------
>  .../devicetree/bindings/mmc/fsl-imx-esdhc.yaml     | 124 +++++++++++++++++++++
>  2 files changed, 124 insertions(+), 67 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
>  create mode 100644 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> 

Applied, thanks!

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH V4 2/3] dt-bindings: clock: Correct mmc node name in i.MX35 binding
  2020-06-18  3:22 ` [PATCH V4 2/3] dt-bindings: clock: Correct mmc node name in i.MX35 binding Anson Huang
@ 2020-06-29 22:24   ` Rob Herring
  0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2020-06-29 22:24 UTC (permalink / raw)
  To: Anson Huang
  Cc: festevam, linux-arm-kernel, linux-kernel, ulf.hansson, kernel,
	robh+dt, Linux-imx, aisheng.dong, s.hauer, shawnguo, linux-mmc,
	s.trumtrar, linux-clk, sboyd, mturquette, devicetree

On Thu, 18 Jun 2020 11:22:57 +0800, Anson Huang wrote:
> Nodename should be "mmc" instead of "esdhc" in i.MX35 clock binding
> to avoid below build error:
> 
> Documentation/devicetree/bindings/clock/imx35-clock.example.dt.yaml:
> esdhc@53fb4000: $nodename:0: 'esdhc@53fb4000' does not match '^mmc(@.*)?$'
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> New patch, to fix build error when patch #1 is added.
> ---
>  Documentation/devicetree/bindings/clock/imx35-clock.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Applied, thanks!

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH V4 3/3] dt-bindings: clock: Correct example in i.MX8QXP LPCG binding
  2020-06-18  3:22 ` [PATCH V4 3/3] dt-bindings: clock: Correct example in i.MX8QXP LPCG binding Anson Huang
  2020-06-29 22:05   ` Rob Herring
@ 2020-06-29 22:25   ` Rob Herring
  1 sibling, 0 replies; 8+ messages in thread
From: Rob Herring @ 2020-06-29 22:25 UTC (permalink / raw)
  To: Anson Huang
  Cc: sboyd, mturquette, linux-arm-kernel, shawnguo, Linux-imx,
	s.hauer, kernel, linux-clk, robh+dt, linux-mmc, ulf.hansson,
	aisheng.dong, devicetree, festevam, s.trumtrar, linux-kernel

On Thu, 18 Jun 2020 11:22:58 +0800, Anson Huang wrote:
> In i.MX8QXP LPCG binding's example, "fsl,imx7d-usdhc" as fallback
> compatible is incorrect, remove it to avoid below build error:
> 
> Documentation/devicetree/bindings/clock/imx8qxp-lpcg.example.dt.yaml:
> mmc@5b010000: compatible: Additional items are not allowed ('fsl,imx7d-usdhc' was unexpected)
> Documentation/devicetree/bindings/clock/imx8qxp-lpcg.example.dt.yaml:
> mmc@5b010000: compatible: ['fsl,imx8qxp-usdhc', 'fsl,imx7d-usdhc'] is too long
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> New patch, to fix build error when patch #1 is added.
> ---
>  Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Applied, thanks!

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-18  3:22 [PATCH V4 1/3] dt-bindings: mmc: Convert imx esdhc to json-schema Anson Huang
2020-06-18  3:22 ` [PATCH V4 2/3] dt-bindings: clock: Correct mmc node name in i.MX35 binding Anson Huang
2020-06-29 22:24   ` Rob Herring
2020-06-18  3:22 ` [PATCH V4 3/3] dt-bindings: clock: Correct example in i.MX8QXP LPCG binding Anson Huang
2020-06-29 22:05   ` Rob Herring
2020-06-29 22:25   ` Rob Herring
2020-06-29 21:48 ` [PATCH V4 1/3] dt-bindings: mmc: Convert imx esdhc to json-schema Rob Herring
2020-06-29 22:24 ` Rob Herring

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git