linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>, linux-clk@vger.kernel.org
Cc: Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] clk: meson: axg-audio: fix g12a tdmout sclk inverter
Date: Wed, 29 Jul 2020 17:43:59 +0200	[thread overview]
Message-ID: <20200729154359.1983085-4-jbrunet@baylibre.com> (raw)
In-Reply-To: <20200729154359.1983085-1-jbrunet@baylibre.com>

Fix the tdmout inverter of the g12a and following SoC families.
This inverter is special and needs two bits to be the inverse of each other
for the inverter to operate properly.

Fixes: 075001385c66 ("clk: meson: axg-audio: add g12a support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/meson/axg-audio.c | 85 ++++++++++++++++++++++++-----------
 1 file changed, 60 insertions(+), 25 deletions(-)

diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c
index 9918cb375de3..7c8d02164443 100644
--- a/drivers/clk/meson/axg-audio.c
+++ b/drivers/clk/meson/axg-audio.c
@@ -147,6 +147,29 @@
 	},								\
 }
 
+#define AUD_SCLK_WS(_name, _reg, _width, _shift_ph, _shift_ws, _pname,	\
+		    _iflags) {						\
+	.data = &(struct meson_sclk_ws_inv_data) {			\
+		.ph = {							\
+			.reg_off = (_reg),				\
+			.shift   = (_shift_ph),				\
+			.width   = (_width),				\
+		},							\
+		.ws = {							\
+			.reg_off = (_reg),				\
+			.shift   = (_shift_ws),				\
+			.width   = (_width),				\
+		},							\
+	},								\
+	.hw.init = &(struct clk_init_data) {				\
+		.name = "aud_"#_name,					\
+		.ops = &meson_clk_phase_ops,				\
+		.parent_names = (const char *[]){ #_pname },		\
+		.num_parents = 1,					\
+		.flags = (_iflags),					\
+	},								\
+}
+
 /* Audio Master Clocks */
 static const struct clk_parent_data mst_mux_parent_data[] = {
 	{ .fw_name = "mst_in0", },
@@ -254,6 +277,10 @@ static const struct clk_parent_data tdm_lrclk_parent_data[] = {
 	AUD_PHASE(tdm##_name##_sclk, _reg, 1, 29,			\
 		  aud_tdm##_name##_sclk_post_en,			\
 		  CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT)
+#define AUD_TDM_SCLK_WS(_name, _reg)					\
+	AUD_SCLK_WS(tdm##_name##_sclk, _reg, 1, 29, 28,			\
+		    aud_tdm##_name##_sclk_post_en,			\
+		    CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT)
 
 #define AUD_TDM_LRLCK(_name, _reg)					\
 	AUD_MUX(tdm##_name##_lrclk, _reg, 0xf, 20,			\
@@ -499,12 +526,6 @@ static struct clk_regmap tdmin_c_sclk =
 	AUD_TDM_SCLK(in_c, AUDIO_CLK_TDMIN_C_CTRL);
 static struct clk_regmap tdmin_lb_sclk =
 	AUD_TDM_SCLK(in_lb, AUDIO_CLK_TDMIN_LB_CTRL);
-static struct clk_regmap tdmout_a_sclk =
-	AUD_TDM_SCLK(out_a, AUDIO_CLK_TDMOUT_A_CTRL);
-static struct clk_regmap tdmout_b_sclk =
-	AUD_TDM_SCLK(out_b, AUDIO_CLK_TDMOUT_B_CTRL);
-static struct clk_regmap tdmout_c_sclk =
-	AUD_TDM_SCLK(out_c, AUDIO_CLK_TDMOUT_C_CTRL);
 
 static struct clk_regmap tdmin_a_lrclk =
 	AUD_TDM_LRLCK(in_a, AUDIO_CLK_TDMIN_A_CTRL);
@@ -521,6 +542,14 @@ static struct clk_regmap tdmout_b_lrclk =
 static struct clk_regmap tdmout_c_lrclk =
 	AUD_TDM_LRLCK(out_c, AUDIO_CLK_TDMOUT_C_CTRL);
 
+/* AXG Clocks */
+static struct clk_regmap axg_tdmout_a_sclk =
+	AUD_TDM_SCLK(out_a, AUDIO_CLK_TDMOUT_A_CTRL);
+static struct clk_regmap axg_tdmout_b_sclk =
+	AUD_TDM_SCLK(out_b, AUDIO_CLK_TDMOUT_B_CTRL);
+static struct clk_regmap axg_tdmout_c_sclk =
+	AUD_TDM_SCLK(out_c, AUDIO_CLK_TDMOUT_C_CTRL);
+
 /* AXG/G12A Clocks */
 static struct clk_hw axg_aud_top = {
 	.init = &(struct clk_init_data) {
@@ -591,7 +620,13 @@ static struct clk_regmap g12a_tdm_sclk_pad_1 = AUD_TDM_PAD_CTRL(
 static struct clk_regmap g12a_tdm_sclk_pad_2 = AUD_TDM_PAD_CTRL(
 	sclk_pad_2, AUDIO_MST_PAD_CTRL1, 8, sclk_pad_ctrl_parent_data);
 
-/* G12a/SM1 clocks */
+static struct clk_regmap g12a_tdmout_a_sclk =
+	AUD_TDM_SCLK_WS(out_a, AUDIO_CLK_TDMOUT_A_CTRL);
+static struct clk_regmap g12a_tdmout_b_sclk =
+	AUD_TDM_SCLK_WS(out_b, AUDIO_CLK_TDMOUT_B_CTRL);
+static struct clk_regmap g12a_tdmout_c_sclk =
+	AUD_TDM_SCLK_WS(out_c, AUDIO_CLK_TDMOUT_C_CTRL);
+
 static struct clk_regmap toram =
 	AUD_PCLK_GATE(toram, AUDIO_CLK_GATE_EN, 20);
 static struct clk_regmap spdifout_b =
@@ -889,9 +924,9 @@ static struct clk_hw_onecell_data axg_audio_hw_onecell_data = {
 		[AUD_CLKID_TDMIN_B_SCLK]	= &tdmin_b_sclk.hw,
 		[AUD_CLKID_TDMIN_C_SCLK]	= &tdmin_c_sclk.hw,
 		[AUD_CLKID_TDMIN_LB_SCLK]	= &tdmin_lb_sclk.hw,
-		[AUD_CLKID_TDMOUT_A_SCLK]	= &tdmout_a_sclk.hw,
-		[AUD_CLKID_TDMOUT_B_SCLK]	= &tdmout_b_sclk.hw,
-		[AUD_CLKID_TDMOUT_C_SCLK]	= &tdmout_c_sclk.hw,
+		[AUD_CLKID_TDMOUT_A_SCLK]	= &axg_tdmout_a_sclk.hw,
+		[AUD_CLKID_TDMOUT_B_SCLK]	= &axg_tdmout_b_sclk.hw,
+		[AUD_CLKID_TDMOUT_C_SCLK]	= &axg_tdmout_c_sclk.hw,
 		[AUD_CLKID_TDMIN_A_LRCLK]	= &tdmin_a_lrclk.hw,
 		[AUD_CLKID_TDMIN_B_LRCLK]	= &tdmin_b_lrclk.hw,
 		[AUD_CLKID_TDMIN_C_LRCLK]	= &tdmin_c_lrclk.hw,
@@ -1026,9 +1061,9 @@ static struct clk_hw_onecell_data g12a_audio_hw_onecell_data = {
 		[AUD_CLKID_TDMIN_B_SCLK]	= &tdmin_b_sclk.hw,
 		[AUD_CLKID_TDMIN_C_SCLK]	= &tdmin_c_sclk.hw,
 		[AUD_CLKID_TDMIN_LB_SCLK]	= &tdmin_lb_sclk.hw,
-		[AUD_CLKID_TDMOUT_A_SCLK]	= &tdmout_a_sclk.hw,
-		[AUD_CLKID_TDMOUT_B_SCLK]	= &tdmout_b_sclk.hw,
-		[AUD_CLKID_TDMOUT_C_SCLK]	= &tdmout_c_sclk.hw,
+		[AUD_CLKID_TDMOUT_A_SCLK]	= &g12a_tdmout_a_sclk.hw,
+		[AUD_CLKID_TDMOUT_B_SCLK]	= &g12a_tdmout_b_sclk.hw,
+		[AUD_CLKID_TDMOUT_C_SCLK]	= &g12a_tdmout_c_sclk.hw,
 		[AUD_CLKID_TDMIN_A_LRCLK]	= &tdmin_a_lrclk.hw,
 		[AUD_CLKID_TDMIN_B_LRCLK]	= &tdmin_b_lrclk.hw,
 		[AUD_CLKID_TDMIN_C_LRCLK]	= &tdmin_c_lrclk.hw,
@@ -1170,9 +1205,9 @@ static struct clk_hw_onecell_data sm1_audio_hw_onecell_data = {
 		[AUD_CLKID_TDMIN_B_SCLK]	= &tdmin_b_sclk.hw,
 		[AUD_CLKID_TDMIN_C_SCLK]	= &tdmin_c_sclk.hw,
 		[AUD_CLKID_TDMIN_LB_SCLK]	= &tdmin_lb_sclk.hw,
-		[AUD_CLKID_TDMOUT_A_SCLK]	= &tdmout_a_sclk.hw,
-		[AUD_CLKID_TDMOUT_B_SCLK]	= &tdmout_b_sclk.hw,
-		[AUD_CLKID_TDMOUT_C_SCLK]	= &tdmout_c_sclk.hw,
+		[AUD_CLKID_TDMOUT_A_SCLK]	= &g12a_tdmout_a_sclk.hw,
+		[AUD_CLKID_TDMOUT_B_SCLK]	= &g12a_tdmout_b_sclk.hw,
+		[AUD_CLKID_TDMOUT_C_SCLK]	= &g12a_tdmout_c_sclk.hw,
 		[AUD_CLKID_TDMIN_A_LRCLK]	= &tdmin_a_lrclk.hw,
 		[AUD_CLKID_TDMIN_B_LRCLK]	= &tdmin_b_lrclk.hw,
 		[AUD_CLKID_TDMIN_C_LRCLK]	= &tdmin_c_lrclk.hw,
@@ -1322,9 +1357,9 @@ static struct clk_regmap *const axg_clk_regmaps[] = {
 	&tdmin_b_sclk,
 	&tdmin_c_sclk,
 	&tdmin_lb_sclk,
-	&tdmout_a_sclk,
-	&tdmout_b_sclk,
-	&tdmout_c_sclk,
+	&axg_tdmout_a_sclk,
+	&axg_tdmout_b_sclk,
+	&axg_tdmout_c_sclk,
 	&tdmin_a_lrclk,
 	&tdmin_b_lrclk,
 	&tdmin_c_lrclk,
@@ -1447,9 +1482,9 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
 	&tdmin_b_sclk,
 	&tdmin_c_sclk,
 	&tdmin_lb_sclk,
-	&tdmout_a_sclk,
-	&tdmout_b_sclk,
-	&tdmout_c_sclk,
+	&g12a_tdmout_a_sclk,
+	&g12a_tdmout_b_sclk,
+	&g12a_tdmout_c_sclk,
 	&tdmin_a_lrclk,
 	&tdmin_b_lrclk,
 	&tdmin_c_lrclk,
@@ -1584,9 +1619,9 @@ static struct clk_regmap *const sm1_clk_regmaps[] = {
 	&tdmin_b_sclk,
 	&tdmin_c_sclk,
 	&tdmin_lb_sclk,
-	&tdmout_a_sclk,
-	&tdmout_b_sclk,
-	&tdmout_c_sclk,
+	&g12a_tdmout_a_sclk,
+	&g12a_tdmout_b_sclk,
+	&g12a_tdmout_c_sclk,
 	&tdmin_a_lrclk,
 	&tdmin_b_lrclk,
 	&tdmin_c_lrclk,
-- 
2.25.4


      parent reply	other threads:[~2020-07-29 15:44 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-29 15:43 [PATCH 0/3] clk: meson: axg-audio: fix tdmout sclk inverter Jerome Brunet
2020-07-29 15:43 ` [PATCH 1/3] clk: meson: add sclk-ws driver Jerome Brunet
2020-07-29 15:43 ` [PATCH 2/3] clk: meson: axg-audio: separate axg and g12a regmap tables Jerome Brunet
2020-07-29 15:43 ` Jerome Brunet [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200729154359.1983085-4-jbrunet@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).