[PATCH] clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks

[PATCH] clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks

[Justin Swartz]

The following changes prevent the unrecoverable freezes and rcu_sched
stall warnings experienced in each of my attempts to take advantage of
lima.

Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a
COMPOSITE that retains the selection of HDMIPHY as the PLL source, but
instead makes uses of the aclk_gpu PLL source gate and parent names
defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p.

Remove the now unused mux_aclk_gpu_pre_p and the four named but also
unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu)
of the aclk_gpu PLL source gate.

Use the correct gate offset for aclk_gpu and aclk_gpu_noc.

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
---
 drivers/clk/rockchip/clk-rk3228.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c
index d17cfb7a3..d7243c09c 100644
--- a/drivers/clk/rockchip/clk-rk3228.c
+++ b/drivers/clk/rockchip/clk-rk3228.c
@@ -156,8 +156,6 @@ PNAME(mux_i2s_out_p)		= { "i2s1_pre", "xin12m" };
 PNAME(mux_i2s2_p)		= { "i2s2_src", "i2s2_frac", "xin12m" };
 PNAME(mux_sclk_spdif_p)		= { "sclk_spdif_src", "spdif_frac", "xin12m" };
 
-PNAME(mux_aclk_gpu_pre_p)	= { "cpll_gpu", "gpll_gpu", "hdmiphy_gpu", "usb480m_gpu" };
-
 PNAME(mux_uart0_p)		= { "uart0_src", "uart0_frac", "xin24m" };
 PNAME(mux_uart1_p)		= { "uart1_src", "uart1_frac", "xin24m" };
 PNAME(mux_uart2_p)		= { "uart2_src", "uart2_frac", "xin24m" };
@@ -468,16 +466,9 @@ static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(24), 6, 10, DFLAGS,
 			RK2928_CLKGATE_CON(2), 8, GFLAGS),
 
-	GATE(0, "cpll_gpu", "cpll", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "gpll_gpu", "gpll", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "hdmiphy_gpu", "hdmiphy", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "usb480m_gpu", "usb480m", 0,
+	COMPOSITE(0, "aclk_gpu_pre", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS,
 			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	COMPOSITE_NOGATE(0, "aclk_gpu_pre", mux_aclk_gpu_pre_p, 0,
-			RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS),
 
 	COMPOSITE(SCLK_SPI0, "sclk_spi0", mux_pll_src_2plls_p, 0,
 			RK2928_CLKSEL_CON(25), 8, 1, MFLAGS, 0, 7, DFLAGS,
@@ -582,8 +573,8 @@ static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
 	GATE(0, "pclk_peri_noc", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(12), 2, GFLAGS),
 
 	/* PD_GPU */
-	GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 14, GFLAGS),
-	GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 15, GFLAGS),
+	GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 14, GFLAGS),
+	GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS),
 
 	/* PD_BUS */
 	GATE(0, "sclk_initmem_mbist", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
-- 
2.11.0

Re: [PATCH] clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks

[Heiko Stuebner]

Hi Justin,

Am Dienstag, 14. Januar 2020, 17:25:02 CET schrieb Justin Swartz:
> The following changes prevent the unrecoverable freezes and rcu_sched
> stall warnings experienced in each of my attempts to take advantage of
> lima.
> 
> Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a
> COMPOSITE that retains the selection of HDMIPHY as the PLL source, but
> instead makes uses of the aclk_gpu PLL source gate and parent names
> defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p.
> 
> Remove the now unused mux_aclk_gpu_pre_p and the four named but also
> unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu)
> of the aclk_gpu PLL source gate.
> 
> Use the correct gate offset for aclk_gpu and aclk_gpu_noc.
> 
> Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>

thanks a lot for diving through the clock controller and fixing the
issues. I've checked against the TRM as well and the previous state
was quite wrong and your changes match the hardware manual.

I've applied it as fix for 5.6 now.

Thanks
Heiko