Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
* [GIT PULL] Rockchip clock updates for 5.1
@ 2019-02-01 11:17 Heiko Stuebner
  2019-02-05 22:08 ` Stephen Boyd
  0 siblings, 1 reply; 3+ messages in thread
From: Heiko Stuebner @ 2019-02-01 11:17 UTC (permalink / raw)
  To: Stephen Boyd, mturquette; +Cc: linux-clk, linux-rockchip

Hi Mike, Stephen,

looks I can re-use my introduction from 4.20 and 5.0 - no big changes
again this time.

A rate_parent flag and some fixup for the fractional part of a PLL

So please pull.


Thanks
Heiko

The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:

  Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git tags/v5.1-rockchip-clk1

for you to fetch changes up to 491b00ff699356a8dab10eb517a1b44205514c9e:

  clk: rockchip: add CLK_SET_RATE_PARENT for rk3066 lcdc dclks (2019-01-07 09:17:15 +0100)

----------------------------------------------------------------
Fix for PLL rate calculation on rk3328 and SET_RATE_PARENT flag
for the display clock on rk3066.

----------------------------------------------------------------
Finley Xiao (1):
      clk: rockchip: add CLK_SET_RATE_PARENT for rk3066 lcdc dclks

Katsuhiro Suzuki (1):
      clk: rockchip: fix frac settings of GPLL clock for rk3328

 drivers/clk/rockchip/clk-rk3188.c |  4 ++--
 drivers/clk/rockchip/clk-rk3328.c | 12 ++++++------
 2 files changed, 8 insertions(+), 8 deletions(-)




^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-01 11:17 [GIT PULL] Rockchip clock updates for 5.1 Heiko Stuebner
2019-02-05 22:08 ` Stephen Boyd
2019-02-15 10:32   ` Heiko Stübner

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org linux-clk@archiver.kernel.org
	public-inbox-index linux-clk


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/ public-inbox