* [PATCH v2 08/15] clock: milbeaut: Add Milbeaut M10V clock controller
@ 2019-02-08 12:27 Sugaya Taichi
2019-02-22 23:57 ` Stephen Boyd
0 siblings, 1 reply; 3+ messages in thread
From: Sugaya Taichi @ 2019-02-08 12:27 UTC (permalink / raw)
To: linux-kernel, linux-clk, linux-arm-kernel
Cc: Michael Turquette, Stephen Boyd, Takao Orito, Kazuhiro Kasai,
Shinji Kanematsu, Jassi Brar, Masami Hiramatsu, Sugaya Taichi
The M10V of the Milbeaut SoCs has an on-chip controller that derive
mostly clocks from a single external clock, using PLLs, dividers,
multiplexers and gates. Since the PLLs have already been started and
will not stop / restart, they are fixed factor. Gates will be added in
later patch (all gates are off state).
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
---
drivers/clk/Makefile | 1 +
drivers/clk/clk-milbeaut.c | 626 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 627 insertions(+)
create mode 100644 drivers/clk/clk-milbeaut.c
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 8a9440a..84a78e8 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o
obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o
+obj-$(CONFIG_ARCH_MILBEAUT_M10V) += clk-milbeaut.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
obj-$(CONFIG_COMMON_CLK_MAX9485) += clk-max9485.o
obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o
diff --git a/drivers/clk/clk-milbeaut.c b/drivers/clk/clk-milbeaut.c
new file mode 100644
index 0000000..f798939
--- /dev/null
+++ b/drivers/clk/clk-milbeaut.c
@@ -0,0 +1,626 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Socionext Inc.
+ * Copyright (C) 2016 Linaro Ltd.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define M10V_CLKSEL1 0x0
+#define CLKSEL(n) (((n) - 1) * 4 + M10V_CLKSEL1)
+
+#define M10V_PLL1 "pll1"
+#define M10V_PLL1DIV2 "pll1-2"
+#define M10V_PLL2 "pll2"
+#define M10V_PLL2DIV2 "pll2-2"
+#define M10V_PLL6 "pll6"
+#define M10V_PLL6DIV2 "pll6-2"
+#define M10V_PLL6DIV3 "pll6-3"
+#define M10V_PLL7 "pll7"
+#define M10V_PLL7DIV2 "pll7-2"
+#define M10V_PLL7DIV5 "pll7-5"
+#define M10V_PLL9 "pll9"
+#define M10V_PLL10 "pll10"
+#define M10V_PLL10DIV2 "pll10-2"
+#define M10V_PLL11 "pll11"
+
+#define M10V_SPI_PARENT0 "spi-parent0"
+#define M10V_SPI_PARENT1 "spi-parent1"
+#define M10V_SPI_PARENT2 "spi-parent2"
+#define M10V_UHS1CLK2_PARENT0 "uhs1clk2-parent0"
+#define M10V_UHS1CLK2_PARENT1 "uhs1clk2-parent1"
+#define M10V_UHS1CLK2_PARENT2 "uhs1clk2-parent2"
+#define M10V_UHS1CLK1_PARENT0 "uhs1clk1-parent0"
+#define M10V_UHS1CLK1_PARENT1 "uhs1clk1-parent1"
+#define M10V_NFCLK_PARENT0 "nfclk-parent0"
+#define M10V_NFCLK_PARENT1 "nfclk-parent1"
+#define M10V_NFCLK_PARENT2 "nfclk-parent2"
+#define M10V_NFCLK_PARENT3 "nfclk-parent3"
+#define M10V_NFCLK_PARENT4 "nfclk-parent4"
+#define M10V_NFCLK_PARENT5 "nfclk-parent5"
+
+#define M10V_DCHREQ 1
+#define M10V_UPOLL_RATE 1
+#define M10V_UTIMEOUT 250
+
+#define M10V_EMMCCLK_ID 0
+#define M10V_ACLK_ID 1
+#define M10V_HCLK_ID 2
+#define M10V_PCLK_ID 3
+#define M10V_RCLK_ID 4
+#define M10V_SPICLK_ID 5
+#define M10V_NFCLK_ID 6
+#define M10V_NUM_CLKS 7
+
+#define to_m10v_div(_hw) container_of(_hw, struct m10v_clk_divider, hw)
+
+static struct clk_hw_onecell_data *m10v_clk_data;
+
+static DEFINE_SPINLOCK(m10v_crglock);
+
+struct m10v_clk_pll_factors {
+ const char *name;
+ const char *parent_name;
+ u32 div;
+ u32 mult;
+};
+struct m10v_clk_div_factors {
+ const char *name;
+ const char *parent_name;
+ u32 offset;
+ u8 shift;
+ u8 width;
+ const struct clk_div_table *table;
+ unsigned long div_flags;
+ int onecell_idx;
+};
+struct m10v_clk_div_fixed_data {
+ const char *name;
+ const char *parent_name;
+ u8 div;
+ u8 mult;
+ int onecell_idx;
+};
+struct m10v_clk_mux_factors {
+ const char *name;
+ const char * const *parent_names;
+ u8 num_parents;
+ u32 offset;
+ u8 shift;
+ u8 mask;
+ u32 *table;
+ unsigned long mux_flags;
+ int onecell_idx;
+};
+
+static const struct clk_div_table emmcclk_table[] = {
+ { .val = 0, .div = 8 },
+ { .val = 1, .div = 9 },
+ { .val = 2, .div = 10 },
+ { .val = 3, .div = 15 },
+ { .div = 0 },
+};
+static const struct clk_div_table mclk400_table[] = {
+ { .val = 1, .div = 2 },
+ { .val = 3, .div = 4 },
+ { .div = 0 },
+};
+static const struct clk_div_table mclk200_table[] = {
+ { .val = 3, .div = 4 },
+ { .val = 7, .div = 8 },
+ { .div = 0 },
+};
+static const struct clk_div_table aclk400_table[] = {
+ { .val = 1, .div = 2 },
+ { .val = 3, .div = 4 },
+ { .div = 0 },
+};
+static const struct clk_div_table aclk300_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 3 },
+ { .div = 0 },
+};
+static const struct clk_div_table aclk_table[] = {
+ { .val = 3, .div = 4 },
+ { .val = 7, .div = 8 },
+ { .div = 0 },
+};
+static const struct clk_div_table aclkexs_table[] = {
+ { .val = 3, .div = 4 },
+ { .val = 4, .div = 5 },
+ { .val = 5, .div = 6 },
+ { .val = 7, .div = 8 },
+ { .div = 0 },
+};
+static const struct clk_div_table hclk_table[] = {
+ { .val = 7, .div = 8 },
+ { .val = 15, .div = 16 },
+ { .div = 0 },
+};
+static const struct clk_div_table hclkbmh_table[] = {
+ { .val = 3, .div = 4 },
+ { .val = 7, .div = 8 },
+ { .div = 0 },
+};
+static const struct clk_div_table pclk_table[] = {
+ { .val = 15, .div = 16 },
+ { .val = 31, .div = 32 },
+ { .div = 0 },
+};
+static const struct clk_div_table rclk_table[] = {
+ { .val = 0, .div = 8 },
+ { .val = 1, .div = 16 },
+ { .val = 2, .div = 24 },
+ { .val = 3, .div = 32 },
+ { .div = 0 },
+};
+static const struct clk_div_table uhs1clk0_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 3 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { .val = 4, .div = 16 },
+ { .div = 0 },
+};
+static const struct clk_div_table uhs2clk_table[] = {
+ { .val = 0, .div = 9 },
+ { .val = 1, .div = 10 },
+ { .val = 2, .div = 11 },
+ { .val = 3, .div = 12 },
+ { .val = 4, .div = 13 },
+ { .val = 5, .div = 14 },
+ { .val = 6, .div = 16 },
+ { .val = 7, .div = 18 },
+ { .div = 0 },
+};
+
+static u32 spi_mux_table[] = {0, 1, 2};
+static const char * const spi_mux_names[] = {
+ M10V_SPI_PARENT0, M10V_SPI_PARENT1, M10V_SPI_PARENT2
+};
+
+static u32 uhs1clk2_mux_table[] = {2, 3, 4, 8};
+static const char * const uhs1clk2_mux_names[] = {
+ M10V_UHS1CLK2_PARENT0, M10V_UHS1CLK2_PARENT1,
+ M10V_UHS1CLK2_PARENT2, M10V_PLL6DIV2
+};
+
+static u32 uhs1clk1_mux_table[] = {3, 4, 8};
+static const char * const uhs1clk1_mux_names[] = {
+ M10V_UHS1CLK1_PARENT0, M10V_UHS1CLK1_PARENT1, M10V_PLL6DIV2
+};
+
+static u32 nfclk_mux_table[] = {0, 1, 2, 3, 4, 8};
+static const char * const nfclk_mux_names[] = {
+ M10V_NFCLK_PARENT0, M10V_NFCLK_PARENT1, M10V_NFCLK_PARENT2,
+ M10V_NFCLK_PARENT3, M10V_NFCLK_PARENT4, M10V_NFCLK_PARENT5
+};
+
+static const struct m10v_clk_pll_factors m10v_pll_fixed_data[] = {
+ {M10V_PLL1, NULL, 1, 40},
+ {M10V_PLL2, NULL, 1, 30},
+ {M10V_PLL6, NULL, 1, 35},
+ {M10V_PLL7, NULL, 1, 40},
+ {M10V_PLL9, NULL, 1, 33},
+ {M10V_PLL10, NULL, 5, 108},
+ {M10V_PLL10DIV2, M10V_PLL10, 2, 1},
+ {M10V_PLL11, NULL, 2, 75},
+};
+
+static const struct m10v_clk_div_fixed_data m10v_div_fixed_data[] = {
+ {"usb2", NULL, 2, 1, -1},
+ {"pcisuppclk", NULL, 20, 1, -1},
+ {M10V_PLL1DIV2, M10V_PLL1, 2, 1, -1},
+ {M10V_PLL2DIV2, M10V_PLL2, 2, 1, -1},
+ {M10V_PLL6DIV2, M10V_PLL6, 2, 1, -1},
+ {M10V_PLL6DIV3, M10V_PLL6, 3, 1, -1},
+ {M10V_PLL7DIV2, M10V_PLL7, 2, 1, -1},
+ {M10V_PLL7DIV5, M10V_PLL7, 5, 1, -1},
+ {"ca7wd", M10V_PLL2DIV2, 12, 1, -1},
+ {"pclkca7wd", M10V_PLL1DIV2, 16, 1, -1},
+ {M10V_SPI_PARENT0, M10V_PLL10DIV2, 2, 1, -1},
+ {M10V_SPI_PARENT1, M10V_PLL10DIV2, 4, 1, -1},
+ {M10V_SPI_PARENT2, M10V_PLL7DIV2, 8, 1, -1},
+ {M10V_UHS1CLK2_PARENT0, M10V_PLL7, 4, 1, -1},
+ {M10V_UHS1CLK2_PARENT1, M10V_PLL7, 8, 1, -1},
+ {M10V_UHS1CLK2_PARENT2, M10V_PLL7, 16, 1, -1},
+ {M10V_UHS1CLK1_PARENT0, M10V_PLL7, 8, 1, -1},
+ {M10V_UHS1CLK1_PARENT1, M10V_PLL7, 16, 1, -1},
+ {M10V_NFCLK_PARENT0, M10V_PLL7DIV2, 8, 1, -1},
+ {M10V_NFCLK_PARENT1, M10V_PLL7DIV2, 10, 1, -1},
+ {M10V_NFCLK_PARENT2, M10V_PLL7DIV2, 13, 1, -1},
+ {M10V_NFCLK_PARENT3, M10V_PLL7DIV2, 16, 1, -1},
+ {M10V_NFCLK_PARENT4, M10V_PLL7DIV2, 40, 1, -1},
+ {M10V_NFCLK_PARENT5, M10V_PLL7DIV5, 10, 1, -1},
+};
+
+static const struct m10v_clk_div_factors m10v_div_factor_data[] = {
+ {"emmc", M10V_PLL11, CLKSEL(1), 28, 3, emmcclk_table, 0,
+ M10V_EMMCCLK_ID},
+ {"mclk400", M10V_PLL1DIV2, CLKSEL(10), 7, 3, mclk400_table, 0, -1},
+ {"mclk200", M10V_PLL1DIV2, CLKSEL(10), 3, 4, mclk200_table, 0, -1},
+ {"aclk400", M10V_PLL1DIV2, CLKSEL(10), 0, 3, aclk400_table, 0, -1},
+ {"aclk300", M10V_PLL2DIV2, CLKSEL(12), 0, 2, aclk300_table, 0, -1},
+ {"aclk", M10V_PLL1DIV2, CLKSEL(9), 20, 4, aclk_table, 0, M10V_ACLK_ID},
+ {"aclkexs", M10V_PLL1DIV2, CLKSEL(9), 16, 4, aclkexs_table, 0, -1},
+ {"hclk", M10V_PLL1DIV2, CLKSEL(9), 7, 5, hclk_table, 0, M10V_HCLK_ID},
+ {"hclkbmh", M10V_PLL1DIV2, CLKSEL(9), 12, 4, hclkbmh_table, 0, -1},
+ {"pclk", M10V_PLL1DIV2, CLKSEL(9), 0, 7, pclk_table, 0, M10V_PCLK_ID},
+ {"uhs1clk0", M10V_PLL7, CLKSEL(1), 3, 5, uhs1clk0_table, 0, -1},
+ {"uhs2clk", M10V_PLL6DIV3, CLKSEL(1), 18, 4, uhs2clk_table, 0, -1},
+};
+
+static const struct m10v_clk_mux_factors m10v_mux_factor_data[] = {
+ {"spi", spi_mux_names, ARRAY_SIZE(spi_mux_names),
+ CLKSEL(8), 3, 7, spi_mux_table, 0, M10V_SPICLK_ID},
+ {"uhs1clk2", uhs1clk2_mux_names, ARRAY_SIZE(uhs1clk2_mux_names),
+ CLKSEL(1), 13, 31, uhs1clk2_mux_table, 0, -1},
+ {"uhs1clk1", uhs1clk1_mux_names, ARRAY_SIZE(uhs1clk1_mux_names),
+ CLKSEL(1), 8, 31, uhs1clk1_mux_table, 0, -1},
+ {"nfclk", nfclk_mux_names, ARRAY_SIZE(nfclk_mux_names),
+ CLKSEL(1), 22, 127, nfclk_mux_table, 0, M10V_NFCLK_ID},
+};
+
+static u8 m10v_mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_mux *mux = to_clk_mux(hw);
+ u32 val;
+
+ val = clk_readl(mux->reg) >> mux->shift;
+ val &= mux->mask;
+
+ return clk_mux_val_to_index(hw, mux->table, mux->flags, val);
+}
+
+static int m10v_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_mux *mux = to_clk_mux(hw);
+ u32 val = clk_mux_index_to_val(mux->table, mux->flags, index);
+ unsigned long flags = 0;
+ u32 reg;
+ u32 write_en = BIT(fls(mux->mask) - 1);
+
+ if (mux->lock)
+ spin_lock_irqsave(mux->lock, flags);
+ else
+ __acquire(mux->lock);
+
+ reg = clk_readl(mux->reg);
+ reg &= ~(mux->mask << mux->shift);
+
+ val = (val | write_en) << mux->shift;
+ reg |= val;
+ clk_writel(reg, mux->reg);
+
+ if (mux->lock)
+ spin_unlock_irqrestore(mux->lock, flags);
+ else
+ __release(mux->lock);
+
+ return 0;
+}
+
+static const struct clk_ops m10v_mux_ops = {
+ .get_parent = m10v_mux_get_parent,
+ .set_parent = m10v_mux_set_parent,
+ .determine_rate = __clk_mux_determine_rate,
+};
+
+static struct clk_hw *m10v_clk_hw_register_mux(struct device *dev,
+ const char *name, const char * const *parent_names,
+ u8 num_parents, unsigned long flags, void __iomem *reg,
+ u8 shift, u32 mask, u8 clk_mux_flags, u32 *table,
+ spinlock_t *lock)
+{
+ struct clk_mux *mux;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+ int ret;
+
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &m10v_mux_ops;
+ init.flags = flags;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ mux->reg = reg;
+ mux->shift = shift;
+ mux->mask = mask;
+ mux->flags = clk_mux_flags;
+ mux->lock = lock;
+ mux->table = table;
+ mux->hw.init = &init;
+
+ hw = &mux->hw;
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
+ kfree(mux);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+
+}
+
+struct m10v_clk_divider {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 shift;
+ u8 width;
+ u8 flags;
+ const struct clk_div_table *table;
+ spinlock_t *lock;
+ void __iomem *write_valid_reg;
+};
+
+static unsigned long m10v_clk_divider_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct m10v_clk_divider *divider = to_m10v_div(hw);
+ unsigned int val;
+
+ val = clk_readl(divider->reg) >> divider->shift;
+ val &= clk_div_mask(divider->width);
+
+ return divider_recalc_rate(hw, parent_rate, val, divider->table,
+ divider->flags, divider->width);
+}
+
+static long m10v_clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct m10v_clk_divider *divider = to_m10v_div(hw);
+
+ /* if read only, just return current value */
+ if (divider->flags & CLK_DIVIDER_READ_ONLY) {
+ u32 val;
+
+ val = clk_readl(divider->reg) >> divider->shift;
+ val &= clk_div_mask(divider->width);
+
+ return divider_ro_round_rate(hw, rate, prate, divider->table,
+ divider->width, divider->flags,
+ val);
+ }
+
+ return divider_round_rate(hw, rate, prate, divider->table,
+ divider->width, divider->flags);
+}
+
+static int m10v_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct m10v_clk_divider *divider = to_m10v_div(hw);
+ int value;
+ unsigned long flags = 0;
+ u32 val;
+ u32 write_en = BIT(divider->width - 1);
+
+ value = divider_get_val(rate, parent_rate, divider->table,
+ divider->width, divider->flags);
+ if (value < 0)
+ return value;
+
+ if (divider->lock)
+ spin_lock_irqsave(divider->lock, flags);
+ else
+ __acquire(divider->lock);
+
+ val = clk_readl(divider->reg);
+ val &= ~(clk_div_mask(divider->width) << divider->shift);
+
+ val |= ((u32)value | write_en) << divider->shift;
+ clk_writel(val, divider->reg);
+
+ if (divider->write_valid_reg) {
+ clk_writel(M10V_DCHREQ, divider->write_valid_reg);
+ if (readl_poll_timeout(divider->write_valid_reg, val,
+ !val, M10V_UPOLL_RATE, M10V_UTIMEOUT))
+ pr_err("%s:%s couldn't stabilize\n",
+ __func__, divider->hw.init->name);
+ }
+
+ if (divider->lock)
+ spin_unlock_irqrestore(divider->lock, flags);
+ else
+ __release(divider->lock);
+
+ return 0;
+}
+
+static const struct clk_ops m10v_clk_divider_ops = {
+ .recalc_rate = m10v_clk_divider_recalc_rate,
+ .round_rate = m10v_clk_divider_round_rate,
+ .set_rate = m10v_clk_divider_set_rate,
+};
+
+static const struct clk_ops m10v_clk_divider_ro_ops = {
+ .recalc_rate = m10v_clk_divider_recalc_rate,
+ .round_rate = m10v_clk_divider_round_rate,
+};
+
+static struct clk_hw *m10v_clk_hw_register_divider(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, const struct clk_div_table *table,
+ spinlock_t *lock, void __iomem *write_valid_reg)
+{
+ struct m10v_clk_divider *div;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+ int ret;
+
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ if (clk_divider_flags & CLK_DIVIDER_READ_ONLY)
+ init.ops = &m10v_clk_divider_ro_ops;
+ else
+ init.ops = &m10v_clk_divider_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ div->reg = reg;
+ div->shift = shift;
+ div->width = width;
+ div->flags = clk_divider_flags;
+ div->lock = lock;
+ div->hw.init = &init;
+ div->table = table;
+ div->write_valid_reg = write_valid_reg;
+
+ /* register the clock */
+ hw = &div->hw;
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
+ kfree(div);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+}
+
+static int m10v_clk_probe(struct platform_device *pdev)
+{
+ int id;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct clk_hw *hw;
+ void __iomem *base, *write_valid_reg;
+ const char *parent_name;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ for (id = 0; id < ARRAY_SIZE(m10v_div_factor_data); ++id) {
+ const struct m10v_clk_div_factors *dfd =
+ &m10v_div_factor_data[id];
+ /*
+ * The registers on CLKSEL(9) or CLKSEL(10) need additional
+ * writing to become valid.
+ */
+ if ((dfd->offset == CLKSEL(9)) || (dfd->offset == CLKSEL(10)))
+ write_valid_reg = base + CLKSEL(11);
+ else
+ write_valid_reg = NULL;
+ hw = m10v_clk_hw_register_divider(NULL, dfd->name,
+ dfd->parent_name,
+ CLK_SET_RATE_PARENT,
+ base + dfd->offset, dfd->shift,
+ dfd->width, dfd->div_flags, dfd->table,
+ &m10v_crglock, write_valid_reg);
+ if (dfd->onecell_idx >= 0)
+ m10v_clk_data->hws[dfd->onecell_idx] = hw;
+ }
+ for (id = 0; id < ARRAY_SIZE(m10v_div_fixed_data); ++id) {
+ const struct m10v_clk_div_fixed_data *dfd =
+ &m10v_div_fixed_data[id];
+ const char *pn = dfd->parent_name ?
+ dfd->parent_name : parent_name;
+ hw = clk_hw_register_fixed_factor(NULL, dfd->name,
+ pn, 0, dfd->mult, dfd->div);
+ if (dfd->onecell_idx >= 0)
+ m10v_clk_data->hws[dfd->onecell_idx] = hw;
+ }
+ for (id = 0; id < ARRAY_SIZE(m10v_mux_factor_data); ++id) {
+ const struct m10v_clk_mux_factors *mfd =
+ &m10v_mux_factor_data[id];
+ hw = m10v_clk_hw_register_mux(NULL, mfd->name,
+ mfd->parent_names, mfd->num_parents,
+ CLK_SET_RATE_PARENT,
+ base + mfd->offset, mfd->shift,
+ mfd->mask, mfd->mux_flags, mfd->table,
+ &m10v_crglock);
+ if (mfd->onecell_idx >= 0)
+ m10v_clk_data->hws[mfd->onecell_idx] = hw;
+ }
+
+ for (id = 0; id < M10V_NUM_CLKS; id++) {
+ if (IS_ERR(m10v_clk_data->hws[id]))
+ return PTR_ERR(m10v_clk_data->hws[id]);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id m10v_clk_dt_ids[] = {
+ { .compatible = "socionext,milbeaut-m10v-ccu", },
+ { },
+};
+
+static struct platform_driver m10v_clk_driver = {
+ .probe = m10v_clk_probe,
+ .driver = {
+ .name = "m10v-ccu",
+ .of_match_table = m10v_clk_dt_ids,
+ },
+};
+builtin_platform_driver(m10v_clk_driver);
+
+static void __init m10v_cc_init(struct device_node *np)
+{
+ int id;
+ void __iomem *base;
+ const char *parent_name;
+ struct clk_hw *hw;
+
+ m10v_clk_data = kzalloc(struct_size(m10v_clk_data, hws,
+ M10V_NUM_CLKS),
+ GFP_KERNEL);
+ if (!m10v_clk_data)
+ return;
+
+ base = of_iomap(np, 0);
+ parent_name = of_clk_get_parent_name(np, 0);
+ if (!parent_name)
+ return;
+
+ /*
+ * This way all clocks fetched before the platform device probes,
+ * except those we assign here for early use, will be deferred.
+ */
+ for (id = 0; id < M10V_NUM_CLKS; id++)
+ m10v_clk_data->hws[id] = ERR_PTR(-EPROBE_DEFER);
+
+ /*
+ * PLLs are set by bootloader so this driver registers them as the
+ * fixed factor.
+ */
+ for (id = 0; id < ARRAY_SIZE(m10v_pll_fixed_data); ++id) {
+ const struct m10v_clk_pll_factors *pfd =
+ &m10v_pll_fixed_data[id];
+ hw = clk_hw_register_fixed_factor(NULL, pfd->name,
+ pfd->parent_name ? pfd->parent_name : parent_name,
+ 0, pfd->mult, pfd->div);
+ }
+
+ /*
+ * timer consumes "rclk" so it needs to register here.
+ */
+ hw = m10v_clk_hw_register_divider(NULL, "rclk", M10V_PLL10DIV2, 0,
+ base + CLKSEL(1), 0, 3, 0, rclk_table,
+ &m10v_crglock, 0);
+ m10v_clk_data->hws[M10V_RCLK_ID] = hw;
+
+ m10v_clk_data->num = M10V_NUM_CLKS;
+ of_clk_add_hw_provider(np, of_clk_hw_onecell_get, m10v_clk_data);
+}
+CLK_OF_DECLARE_DRIVER(m10v_cc, "socionext,milbeaut-m10v-ccu", m10v_cc_init);
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v2 08/15] clock: milbeaut: Add Milbeaut M10V clock controller
2019-02-08 12:27 [PATCH v2 08/15] clock: milbeaut: Add Milbeaut M10V clock controller Sugaya Taichi
@ 2019-02-22 23:57 ` Stephen Boyd
2019-02-25 12:13 ` Sugaya, Taichi
0 siblings, 1 reply; 3+ messages in thread
From: Stephen Boyd @ 2019-02-22 23:57 UTC (permalink / raw)
To: Sugaya Taichi, linux-arm-kernel, linux-clk, linux-kernel
Cc: Michael Turquette, Takao Orito, Kazuhiro Kasai, Shinji Kanematsu,
Jassi Brar, Masami Hiramatsu, Sugaya Taichi
Quoting Sugaya Taichi (2019-02-08 04:27:17)
> diff --git a/drivers/clk/clk-milbeaut.c b/drivers/clk/clk-milbeaut.c
> new file mode 100644
> index 0000000..f798939
> --- /dev/null
> +++ b/drivers/clk/clk-milbeaut.c
> @@ -0,0 +1,626 @@
[....]
> +struct m10v_clk_div_fixed_data {
> + const char *name;
> + const char *parent_name;
> + u8 div;
> + u8 mult;
> + int onecell_idx;
> +};
> +struct m10v_clk_mux_factors {
> + const char *name;
> + const char * const *parent_names;
> + u8 num_parents;
> + u32 offset;
> + u8 shift;
> + u8 mask;
> + u32 *table;
> + unsigned long mux_flags;
> + int onecell_idx;
> +};
Please add newlines between struct definitions. It also wouldn't hurt to
have kernel-doc on these.
> +
> +static const struct clk_div_table emmcclk_table[] = {
> + { .val = 0, .div = 8 },
> + { .val = 1, .div = 9 },
> + { .val = 2, .div = 10 },
> + { .val = 3, .div = 15 },
> + { .div = 0 },
> +};
> +static const struct clk_div_table mclk400_table[] = {
> + { .val = 1, .div = 2 },
> + { .val = 3, .div = 4 },
> + { .div = 0 },
> +};
> +static const struct clk_div_table mclk200_table[] = {
> + { .val = 3, .div = 4 },
> + { .val = 7, .div = 8 },
> + { .div = 0 },
> +};
> +static const struct clk_div_table aclk400_table[] = {
> + { .val = 1, .div = 2 },
> + { .val = 3, .div = 4 },
> + { .div = 0 },
> +};
> +static const struct clk_div_table aclk300_table[] = {
> + { .val = 0, .div = 2 },
> + { .val = 1, .div = 3 },
> + { .div = 0 },
> +};
> +static const struct clk_div_table aclk_table[] = {
> + { .val = 3, .div = 4 },
> + { .val = 7, .div = 8 },
> + { .div = 0 },
> +};
> +static const struct clk_div_table aclkexs_table[] = {
> + { .val = 3, .div = 4 },
> + { .val = 4, .div = 5 },
> + { .val = 5, .div = 6 },
> + { .val = 7, .div = 8 },
> + { .div = 0 },
> +};
> +static const struct clk_div_table hclk_table[] = {
> + { .val = 7, .div = 8 },
> + { .val = 15, .div = 16 },
> + { .div = 0 },
> +};
> +static const struct clk_div_table hclkbmh_table[] = {
> + { .val = 3, .div = 4 },
> + { .val = 7, .div = 8 },
> + { .div = 0 },
> +};
> +static const struct clk_div_table pclk_table[] = {
> + { .val = 15, .div = 16 },
> + { .val = 31, .div = 32 },
> + { .div = 0 },
> +};
> +static const struct clk_div_table rclk_table[] = {
> + { .val = 0, .div = 8 },
> + { .val = 1, .div = 16 },
> + { .val = 2, .div = 24 },
> + { .val = 3, .div = 32 },
> + { .div = 0 },
> +};
> +static const struct clk_div_table uhs1clk0_table[] = {
> + { .val = 0, .div = 2 },
> + { .val = 1, .div = 3 },
> + { .val = 2, .div = 4 },
> + { .val = 3, .div = 8 },
> + { .val = 4, .div = 16 },
> + { .div = 0 },
> +};
> +static const struct clk_div_table uhs2clk_table[] = {
> + { .val = 0, .div = 9 },
> + { .val = 1, .div = 10 },
> + { .val = 2, .div = 11 },
> + { .val = 3, .div = 12 },
> + { .val = 4, .div = 13 },
> + { .val = 5, .div = 14 },
> + { .val = 6, .div = 16 },
> + { .val = 7, .div = 18 },
> + { .div = 0 },
> +};
Same comment applies here. Newlines between tables please.
> +
> +static u32 spi_mux_table[] = {0, 1, 2};
> +static const char * const spi_mux_names[] = {
> + M10V_SPI_PARENT0, M10V_SPI_PARENT1, M10V_SPI_PARENT2
> +};
> +
> +static u32 uhs1clk2_mux_table[] = {2, 3, 4, 8};
> +static const char * const uhs1clk2_mux_names[] = {
> + M10V_UHS1CLK2_PARENT0, M10V_UHS1CLK2_PARENT1,
> + M10V_UHS1CLK2_PARENT2, M10V_PLL6DIV2
> +};
> +
> +static u32 uhs1clk1_mux_table[] = {3, 4, 8};
> +static const char * const uhs1clk1_mux_names[] = {
> + M10V_UHS1CLK1_PARENT0, M10V_UHS1CLK1_PARENT1, M10V_PLL6DIV2
> +};
> +
[...]
> +
> +static const struct m10v_clk_mux_factors m10v_mux_factor_data[] = {
> + {"spi", spi_mux_names, ARRAY_SIZE(spi_mux_names),
> + CLKSEL(8), 3, 7, spi_mux_table, 0, M10V_SPICLK_ID},
> + {"uhs1clk2", uhs1clk2_mux_names, ARRAY_SIZE(uhs1clk2_mux_names),
> + CLKSEL(1), 13, 31, uhs1clk2_mux_table, 0, -1},
> + {"uhs1clk1", uhs1clk1_mux_names, ARRAY_SIZE(uhs1clk1_mux_names),
> + CLKSEL(1), 8, 31, uhs1clk1_mux_table, 0, -1},
> + {"nfclk", nfclk_mux_names, ARRAY_SIZE(nfclk_mux_names),
> + CLKSEL(1), 22, 127, nfclk_mux_table, 0, M10V_NFCLK_ID},
> +};
> +
> +static u8 m10v_mux_get_parent(struct clk_hw *hw)
> +{
> + struct clk_mux *mux = to_clk_mux(hw);
> + u32 val;
> +
> + val = clk_readl(mux->reg) >> mux->shift;
Please don't use clk_readl() unless you absolutely need it.
> + val &= mux->mask;
> +
> + return clk_mux_val_to_index(hw, mux->table, mux->flags, val);
> +}
> +
[...]
> +static struct clk_hw *m10v_clk_hw_register_divider(struct device *dev,
> + const char *name, const char *parent_name, unsigned long flags,
> + void __iomem *reg, u8 shift, u8 width,
> + u8 clk_divider_flags, const struct clk_div_table *table,
> + spinlock_t *lock, void __iomem *write_valid_reg)
> +{
> + struct m10v_clk_divider *div;
> + struct clk_hw *hw;
> + struct clk_init_data init;
> + int ret;
> +
> + div = kzalloc(sizeof(*div), GFP_KERNEL);
> + if (!div)
> + return ERR_PTR(-ENOMEM);
> +
> + init.name = name;
> + if (clk_divider_flags & CLK_DIVIDER_READ_ONLY)
Is this used?
> + init.ops = &m10v_clk_divider_ro_ops;
> + else
> + init.ops = &m10v_clk_divider_ops;
> + init.flags = flags;
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> +
> + div->reg = reg;
> + div->shift = shift;
> + div->width = width;
> + div->flags = clk_divider_flags;
> + div->lock = lock;
> + div->hw.init = &init;
> + div->table = table;
> + div->write_valid_reg = write_valid_reg;
> +
> + /* register the clock */
> + hw = &div->hw;
> + ret = clk_hw_register(dev, hw);
> + if (ret) {
> + kfree(div);
> + hw = ERR_PTR(ret);
> + }
> +
> + return hw;
> +}
> +
> +static int m10v_clk_probe(struct platform_device *pdev)
> +{
[...]
> + for (id = 0; id < ARRAY_SIZE(m10v_div_fixed_data); ++id) {
> + const struct m10v_clk_div_fixed_data *dfd =
> + &m10v_div_fixed_data[id];
> + const char *pn = dfd->parent_name ?
> + dfd->parent_name : parent_name;
> + hw = clk_hw_register_fixed_factor(NULL, dfd->name,
> + pn, 0, dfd->mult, dfd->div);
> + if (dfd->onecell_idx >= 0)
> + m10v_clk_data->hws[dfd->onecell_idx] = hw;
> + }
> + for (id = 0; id < ARRAY_SIZE(m10v_mux_factor_data); ++id) {
> + const struct m10v_clk_mux_factors *mfd =
> + &m10v_mux_factor_data[id];
> + hw = m10v_clk_hw_register_mux(NULL, mfd->name,
> + mfd->parent_names, mfd->num_parents,
> + CLK_SET_RATE_PARENT,
> + base + mfd->offset, mfd->shift,
> + mfd->mask, mfd->mux_flags, mfd->table,
> + &m10v_crglock);
> + if (mfd->onecell_idx >= 0)
> + m10v_clk_data->hws[mfd->onecell_idx] = hw;
> + }
Similar style nitpick here. Add newlines between for loops. It may also
make sense to make functions for each of those so that we don't need to
put all the local variables interspersed throughout the function in each
for loop.
> +
> + for (id = 0; id < M10V_NUM_CLKS; id++) {
> + if (IS_ERR(m10v_clk_data->hws[id]))
> + return PTR_ERR(m10v_clk_data->hws[id]);
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id m10v_clk_dt_ids[] = {
> + { .compatible = "socionext,milbeaut-m10v-ccu", },
> + { },
Drop the , on the sentinel please. That way nothing can ever go after it
without causing a compilation error.
> +};
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v2 08/15] clock: milbeaut: Add Milbeaut M10V clock controller
2019-02-22 23:57 ` Stephen Boyd
@ 2019-02-25 12:13 ` Sugaya, Taichi
0 siblings, 0 replies; 3+ messages in thread
From: Sugaya, Taichi @ 2019-02-25 12:13 UTC (permalink / raw)
To: Stephen Boyd, linux-arm-kernel, linux-clk, linux-kernel
Cc: Michael Turquette, Takao Orito, Kazuhiro Kasai, Shinji Kanematsu,
Jassi Brar, Masami Hiramatsu
Hi,
Thank you for your comments.
On 2019/02/23 8:57, Stephen Boyd wrote:
> Quoting Sugaya Taichi (2019-02-08 04:27:17)
>> diff --git a/drivers/clk/clk-milbeaut.c b/drivers/clk/clk-milbeaut.c
>> new file mode 100644
>> index 0000000..f798939
>> --- /dev/null
>> +++ b/drivers/clk/clk-milbeaut.c
>> @@ -0,0 +1,626 @@
> [....]
>> +struct m10v_clk_div_fixed_data {
>> + const char *name;
>> + const char *parent_name;
>> + u8 div;
>> + u8 mult;
>> + int onecell_idx;
>> +};
>> +struct m10v_clk_mux_factors {
>> + const char *name;
>> + const char * const *parent_names;
>> + u8 num_parents;
>> + u32 offset;
>> + u8 shift;
>> + u8 mask;
>> + u32 *table;
>> + unsigned long mux_flags;
>> + int onecell_idx;
>> +};
>
> Please add newlines between struct definitions. It also wouldn't hurt to
> have kernel-doc on these.
>
I got it.
>> +
>> +static const struct clk_div_table emmcclk_table[] = {
>> + { .val = 0, .div = 8 },
>> + { .val = 1, .div = 9 },
>> + { .val = 2, .div = 10 },
>> + { .val = 3, .div = 15 },
>> + { .div = 0 },
>> +};
>> +static const struct clk_div_table mclk400_table[] = {
>> + { .val = 1, .div = 2 },
>> + { .val = 3, .div = 4 },
>> + { .div = 0 },
>> +};
>> +static const struct clk_div_table mclk200_table[] = {
>> + { .val = 3, .div = 4 },
>> + { .val = 7, .div = 8 },
>> + { .div = 0 },
>> +};
>> +static const struct clk_div_table aclk400_table[] = {
>> + { .val = 1, .div = 2 },
>> + { .val = 3, .div = 4 },
>> + { .div = 0 },
>> +};
>> +static const struct clk_div_table aclk300_table[] = {
>> + { .val = 0, .div = 2 },
>> + { .val = 1, .div = 3 },
>> + { .div = 0 },
>> +};
>> +static const struct clk_div_table aclk_table[] = {
>> + { .val = 3, .div = 4 },
>> + { .val = 7, .div = 8 },
>> + { .div = 0 },
>> +};
>> +static const struct clk_div_table aclkexs_table[] = {
>> + { .val = 3, .div = 4 },
>> + { .val = 4, .div = 5 },
>> + { .val = 5, .div = 6 },
>> + { .val = 7, .div = 8 },
>> + { .div = 0 },
>> +};
>> +static const struct clk_div_table hclk_table[] = {
>> + { .val = 7, .div = 8 },
>> + { .val = 15, .div = 16 },
>> + { .div = 0 },
>> +};
>> +static const struct clk_div_table hclkbmh_table[] = {
>> + { .val = 3, .div = 4 },
>> + { .val = 7, .div = 8 },
>> + { .div = 0 },
>> +};
>> +static const struct clk_div_table pclk_table[] = {
>> + { .val = 15, .div = 16 },
>> + { .val = 31, .div = 32 },
>> + { .div = 0 },
>> +};
>> +static const struct clk_div_table rclk_table[] = {
>> + { .val = 0, .div = 8 },
>> + { .val = 1, .div = 16 },
>> + { .val = 2, .div = 24 },
>> + { .val = 3, .div = 32 },
>> + { .div = 0 },
>> +};
>> +static const struct clk_div_table uhs1clk0_table[] = {
>> + { .val = 0, .div = 2 },
>> + { .val = 1, .div = 3 },
>> + { .val = 2, .div = 4 },
>> + { .val = 3, .div = 8 },
>> + { .val = 4, .div = 16 },
>> + { .div = 0 },
>> +};
>> +static const struct clk_div_table uhs2clk_table[] = {
>> + { .val = 0, .div = 9 },
>> + { .val = 1, .div = 10 },
>> + { .val = 2, .div = 11 },
>> + { .val = 3, .div = 12 },
>> + { .val = 4, .div = 13 },
>> + { .val = 5, .div = 14 },
>> + { .val = 6, .div = 16 },
>> + { .val = 7, .div = 18 },
>> + { .div = 0 },
>> +};
>
> Same comment applies here. Newlines between tables please.
>
OK.
>> +
>> +static u32 spi_mux_table[] = {0, 1, 2};
>> +static const char * const spi_mux_names[] = {
>> + M10V_SPI_PARENT0, M10V_SPI_PARENT1, M10V_SPI_PARENT2
>> +};
>> +
>> +static u32 uhs1clk2_mux_table[] = {2, 3, 4, 8};
>> +static const char * const uhs1clk2_mux_names[] = {
>> + M10V_UHS1CLK2_PARENT0, M10V_UHS1CLK2_PARENT1,
>> + M10V_UHS1CLK2_PARENT2, M10V_PLL6DIV2
>> +};
>> +
>> +static u32 uhs1clk1_mux_table[] = {3, 4, 8};
>> +static const char * const uhs1clk1_mux_names[] = {
>> + M10V_UHS1CLK1_PARENT0, M10V_UHS1CLK1_PARENT1, M10V_PLL6DIV2
>> +};
>> +
> [...]
>> +
>> +static const struct m10v_clk_mux_factors m10v_mux_factor_data[] = {
>> + {"spi", spi_mux_names, ARRAY_SIZE(spi_mux_names),
>> + CLKSEL(8), 3, 7, spi_mux_table, 0, M10V_SPICLK_ID},
>> + {"uhs1clk2", uhs1clk2_mux_names, ARRAY_SIZE(uhs1clk2_mux_names),
>> + CLKSEL(1), 13, 31, uhs1clk2_mux_table, 0, -1},
>> + {"uhs1clk1", uhs1clk1_mux_names, ARRAY_SIZE(uhs1clk1_mux_names),
>> + CLKSEL(1), 8, 31, uhs1clk1_mux_table, 0, -1},
>> + {"nfclk", nfclk_mux_names, ARRAY_SIZE(nfclk_mux_names),
>> + CLKSEL(1), 22, 127, nfclk_mux_table, 0, M10V_NFCLK_ID},
>> +};
>> +
>> +static u8 m10v_mux_get_parent(struct clk_hw *hw)
>> +{
>> + struct clk_mux *mux = to_clk_mux(hw);
>> + u32 val;
>> +
>> + val = clk_readl(mux->reg) >> mux->shift;
>
> Please don't use clk_readl() unless you absolutely need it.
>
OK, I try to use "readl()" simply.
>> + val &= mux->mask;
>> +
>> + return clk_mux_val_to_index(hw, mux->table, mux->flags, val);
>> +}
>> +
> [...]
>> +static struct clk_hw *m10v_clk_hw_register_divider(struct device *dev,
>> + const char *name, const char *parent_name, unsigned long flags,
>> + void __iomem *reg, u8 shift, u8 width,
>> + u8 clk_divider_flags, const struct clk_div_table *table,
>> + spinlock_t *lock, void __iomem *write_valid_reg)
>> +{
>> + struct m10v_clk_divider *div;
>> + struct clk_hw *hw;
>> + struct clk_init_data init;
>> + int ret;
>> +
>> + div = kzalloc(sizeof(*div), GFP_KERNEL);
>> + if (!div)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + init.name = name;
>> + if (clk_divider_flags & CLK_DIVIDER_READ_ONLY)
>
> Is this used?
>
Now there are no factors to use "CLK_DIVIDER_READ_ONLY".
I will drop this statement and ro_ops too.
>> + init.ops = &m10v_clk_divider_ro_ops;
>> + else
>> + init.ops = &m10v_clk_divider_ops;
>> + init.flags = flags;
>> + init.parent_names = &parent_name;
>> + init.num_parents = 1;
>> +
>> + div->reg = reg;
>> + div->shift = shift;
>> + div->width = width;
>> + div->flags = clk_divider_flags;
>> + div->lock = lock;
>> + div->hw.init = &init;
>> + div->table = table;
>> + div->write_valid_reg = write_valid_reg;
>> +
>> + /* register the clock */
>> + hw = &div->hw;
>> + ret = clk_hw_register(dev, hw);
>> + if (ret) {
>> + kfree(div);
>> + hw = ERR_PTR(ret);
>> + }
>> +
>> + return hw;
>> +}
>> +
>> +static int m10v_clk_probe(struct platform_device *pdev)
>> +{
> [...]
>> + for (id = 0; id < ARRAY_SIZE(m10v_div_fixed_data); ++id) {
>> + const struct m10v_clk_div_fixed_data *dfd =
>> + &m10v_div_fixed_data[id];
>> + const char *pn = dfd->parent_name ?
>> + dfd->parent_name : parent_name;
>> + hw = clk_hw_register_fixed_factor(NULL, dfd->name,
>> + pn, 0, dfd->mult, dfd->div);
>> + if (dfd->onecell_idx >= 0)
>> + m10v_clk_data->hws[dfd->onecell_idx] = hw;
>> + }
>> + for (id = 0; id < ARRAY_SIZE(m10v_mux_factor_data); ++id) {
>> + const struct m10v_clk_mux_factors *mfd =
>> + &m10v_mux_factor_data[id];
>> + hw = m10v_clk_hw_register_mux(NULL, mfd->name,
>> + mfd->parent_names, mfd->num_parents,
>> + CLK_SET_RATE_PARENT,
>> + base + mfd->offset, mfd->shift,
>> + mfd->mask, mfd->mux_flags, mfd->table,
>> + &m10v_crglock);
>> + if (mfd->onecell_idx >= 0)
>> + m10v_clk_data->hws[mfd->onecell_idx] = hw;
>> + }
>
> Similar style nitpick here. Add newlines between for loops. It may also
> make sense to make functions for each of those so that we don't need to
> put all the local variables interspersed throughout the function in each
> for loop.
>
Yeah OK, I think these statements are bit of ugly too..
I try to make it easy to see.
>> +
>> + for (id = 0; id < M10V_NUM_CLKS; id++) {
>> + if (IS_ERR(m10v_clk_data->hws[id]))
>> + return PTR_ERR(m10v_clk_data->hws[id]);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id m10v_clk_dt_ids[] = {
>> + { .compatible = "socionext,milbeaut-m10v-ccu", },
>> + { },
>
> Drop the , on the sentinel please. That way nothing can ever go after it
> without causing a compilation error.
>
OK, drop it.
Thanks,
Sugaya Taichi
>> +};
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-02-25 12:13 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-08 12:27 [PATCH v2 08/15] clock: milbeaut: Add Milbeaut M10V clock controller Sugaya Taichi
2019-02-22 23:57 ` Stephen Boyd
2019-02-25 12:13 ` Sugaya, Taichi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).