Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: mazziesaccount@gmail.com, matti.vaittinen@fi.rohmeurope.com
Cc: heikki.haikola@fi.rohmeurope.com,
	mikko.mutanen@fi.rohmeurope.com, lee.jones@linaro.org,
	robh+dt@kernel.org, mark.rutland@arm.com, broonie@kernel.org,
	gregkh@linuxfoundation.org, rafael@kernel.org,
	mturquette@baylibre.com, sboyd@kernel.org,
	linus.walleij@linaro.org, bgolaszewski@baylibre.com,
	sre@kernel.org, lgirdwood@gmail.com, a.zummo@towertech.it,
	alexandre.belloni@bootlin.com, wim@linux-watchdog.org,
	linux@roeck-us.net, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-rtc@vger.kernel.org, linux-watchdog@vger.kernel.org
Subject: [PATCH v6 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core
Date: Tue, 5 Feb 2019 11:05:34 +0200
Message-ID: <8fab160ffe0d736dbff0cbcf33ef91b90ee603fb.1549356505.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1549356505.git.matti.vaittinen@fi.rohmeurope.com>

ROHM BD70528MWV is an ultra-low quiescent current general
purpose single-chip power management IC for battery-powered
portable devices.

Add MFD core which enables chip access for following subdevices:
	- regulators/LED drivers
	- battery-charger
	- gpios
	- 32.768kHz clk
	- RTC
	- watchdog

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
 drivers/mfd/Kconfig              |  17 ++
 drivers/mfd/Makefile             |   1 +
 drivers/mfd/rohm-bd70528.c       | 410 +++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/rohm-bd70528.h | 392 +++++++++++++++++++++++++++++++++++++
 4 files changed, 820 insertions(+)
 create mode 100644 drivers/mfd/rohm-bd70528.c
 create mode 100644 include/linux/mfd/rohm-bd70528.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f461460a2aeb..f1a0574cebb1 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1847,6 +1847,23 @@ config MFD_ROHM_BD718XX
 	  NXP i.MX8. It contains 8 BUCK outputs and 7 LDOs, voltage monitoring
 	  and emergency shut down as well as 32,768KHz clock output.
 
+config MFD_ROHM_BD70528
+	tristate "ROHM BD70528 Power Management IC"
+	depends on I2C=y
+	depends on OF
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	select MFD_CORE
+	help
+	  Select this option to get support for the ROHM BD70528 Power
+	  Management IC. BD71837 is general purpose single-chip power
+	  management IC for battery-powered portable devices. It contains
+	  3 ultra-low current consumption buck converters, 3 LDOs and 2 LED
+	  Drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz
+	  crystal oscillator, high-accuracy VREF for use with an external ADC,
+	  10 bits SAR ADC for battery temperature monitor and 1S battery
+	  charger.
+
 config MFD_STM32_LPTIMER
 	tristate "Support for STM32 Low-Power Timer"
 	depends on (ARCH_STM32 && OF) || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 12980a4ad460..fc9b1408e39b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -241,4 +241,5 @@ obj-$(CONFIG_MFD_MXS_LRADC)     += mxs-lradc.o
 obj-$(CONFIG_MFD_SC27XX_PMIC)	+= sprd-sc27xx-spi.o
 obj-$(CONFIG_RAVE_SP_CORE)	+= rave-sp.o
 obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-bd718x7.o
+obj-$(CONFIG_MFD_ROHM_BD70528)	+= rohm-bd70528.o
 
diff --git a/drivers/mfd/rohm-bd70528.c b/drivers/mfd/rohm-bd70528.c
new file mode 100644
index 000000000000..580164addeeb
--- /dev/null
+++ b/drivers/mfd/rohm-bd70528.c
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// Copyright (C) 2018 ROHM Semiconductors
+//
+// ROHM BD70528 PMIC driver
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rohm-bd70528.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#define BD70528_INT_RES(_reg, _name)		\
+	{					\
+		.start = (_reg),		\
+		.end = (_reg),			\
+		.name = (_name),		\
+		.flags = IORESOURCE_IRQ,	\
+	}
+
+static const struct resource rtc_irqs[] = {
+	BD70528_INT_RES(BD70528_INT_RTC_ALARM, "bd70528-rtc-alm"),
+	BD70528_INT_RES(BD70528_INT_ELPS_TIM, "bd70528-elapsed-timer"),
+};
+
+static const struct resource charger_irqs[] = {
+	BD70528_INT_RES(BD70528_INT_BAT_OV_RES, "bd70528-bat-ov-res"),
+	BD70528_INT_RES(BD70528_INT_BAT_OV_DET, "bd70528-bat-ov-det"),
+	BD70528_INT_RES(BD70528_INT_DBAT_DET, "bd70528-bat-dead"),
+	BD70528_INT_RES(BD70528_INT_BATTSD_COLD_RES, "bd70528-bat-warmed"),
+	BD70528_INT_RES(BD70528_INT_BATTSD_COLD_DET, "bd70528-bat-cold"),
+	BD70528_INT_RES(BD70528_INT_BATTSD_HOT_RES, "bd70528-bat-cooled"),
+	BD70528_INT_RES(BD70528_INT_BATTSD_HOT_DET, "bd70528-bat-hot"),
+	BD70528_INT_RES(BD70528_INT_CHG_TSD, "bd70528-chg-tshd"),
+	BD70528_INT_RES(BD70528_INT_BAT_RMV, "bd70528-bat-removed"),
+	BD70528_INT_RES(BD70528_INT_BAT_DET, "bd70528-bat-detected"),
+	BD70528_INT_RES(BD70528_INT_DCIN2_OV_RES, "bd70528-dcin2-ov-res"),
+	BD70528_INT_RES(BD70528_INT_DCIN2_OV_DET, "bd70528-dcin2-ov-det"),
+	BD70528_INT_RES(BD70528_INT_DCIN2_RMV, "bd70528-dcin2-removed"),
+	BD70528_INT_RES(BD70528_INT_DCIN2_DET, "bd70528-dcin2-detected"),
+	BD70528_INT_RES(BD70528_INT_DCIN1_RMV, "bd70528-dcin1-removed"),
+	BD70528_INT_RES(BD70528_INT_DCIN1_DET, "bd70528-dcin1-detected"),
+};
+
+static struct mfd_cell bd70528_mfd_cells[] = {
+	{ .name = "bd70528-pmic", },
+	{ .name = "bd70528-gpio", },
+	/*
+	 * We use BD71837 driver to drive the clk block. Only differences to
+	 * BD70528 clock gate are the register address and mask.
+	 */
+	{ .name = "bd718xx-clk", },
+	{ .name = "bd70528-wdt", },
+	{
+		.name = "bd70528-power",
+		.resources = &charger_irqs[0],
+		.num_resources = ARRAY_SIZE(charger_irqs),
+	},
+	{
+		.name = "bd70528-rtc",
+		.resources = &rtc_irqs[0],
+		.num_resources = ARRAY_SIZE(rtc_irqs),
+	},
+};
+
+static const struct regmap_range volatile_ranges[] = {
+	/* IRQ regs */
+	{
+		.range_min = BD70528_REG_INT_MAIN,
+		.range_max = BD70528_REG_INT_OP_FAIL,
+	},
+	/* RTC regs */
+	{
+		.range_min = BD70528_REG_RTC_COUNT_H,
+		.range_max = BD70528_REG_RTC_ALM_REPEAT,
+	},
+	/*
+	 * WDT control reg is special. Magic values must be
+	 * written to it in order to change the control. Should
+	 * not be cached.
+	 */
+	{
+		.range_min = BD70528_REG_WDT_CTRL,
+		.range_max = BD70528_REG_WDT_CTRL,
+	},
+	/*
+	 * bd70528 contains also few other registers which require
+	 * magic sequence to be written in order to update the value.
+	 * At least SHIPMODE, HWRESET, WARMRESET,and STANDBY
+	 */
+	{
+		.range_min = BD70528_REG_SHIPMODE,
+		.range_max = BD70528_REG_STANDBY,
+	},
+};
+
+static const struct regmap_access_table volatile_regs = {
+	.yes_ranges = &volatile_ranges[0],
+	.n_yes_ranges = ARRAY_SIZE(volatile_ranges),
+};
+
+static struct regmap_config bd70528_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_table = &volatile_regs,
+	.max_register = BD70528_MAX_REGISTER,
+	.cache_type = REGCACHE_RBTREE,
+};
+/* bit [0] - Shutdown register */
+unsigned int bit0_offsets[] = {0};
+/* bit [1] - Power failure register */
+unsigned int bit1_offsets[] = {1};
+/* bit [2] - VR FAULT register */
+unsigned int bit2_offsets[] = {2};
+/* bit [3] - PMU register interrupts */
+unsigned int bit3_offsets[] = {3};
+/* bit [4] - Charger 1 and Charger 2 registers */
+unsigned int bit4_offsets[] = {4, 5};
+/* bit [5] - RTC register */
+unsigned int bit5_offsets[] = {6};
+/* bit [6] - GPIO register */
+unsigned int bit6_offsets[] = {7};
+/* bit [7] - Invalid operation register */
+unsigned int bit7_offsets[] = {8};
+
+static struct regmap_irq_sub_irq_map bd70528_sub_irq_offsets[] = {
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit0_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit1_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit2_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit3_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit4_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit5_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit6_offsets),
+	REGMAP_IRQ_MAIN_REG_OFFSET(bit7_offsets),
+};
+
+static struct regmap_irq irqs[] = {
+	REGMAP_IRQ_REG(BD70528_INT_LONGPUSH, 0, BD70528_INT_LONGPUSH_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_WDT, 0, BD70528_INT_WDT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_HWRESET, 0, BD70528_INT_HWRESET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_RSTB_FAULT, 0, BD70528_INT_RSTB_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_VBAT_UVLO, 0, BD70528_INT_VBAT_UVLO_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_TSD, 0, BD70528_INT_TSD_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_RSTIN, 0, BD70528_INT_RSTIN_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK1_FAULT, 1,
+		       BD70528_INT_BUCK1_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK2_FAULT, 1,
+		       BD70528_INT_BUCK2_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK3_FAULT, 1,
+		       BD70528_INT_BUCK3_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LDO1_FAULT, 1, BD70528_INT_LDO1_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LDO2_FAULT, 1, BD70528_INT_LDO2_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LDO3_FAULT, 1, BD70528_INT_LDO3_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LED1_FAULT, 1, BD70528_INT_LED1_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LED2_FAULT, 1, BD70528_INT_LED2_FAULT_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK1_OCP, 2, BD70528_INT_BUCK1_OCP_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK2_OCP, 2, BD70528_INT_BUCK2_OCP_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK3_OCP, 2, BD70528_INT_BUCK3_OCP_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LED1_OCP, 2, BD70528_INT_LED1_OCP_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LED2_OCP, 2, BD70528_INT_LED2_OCP_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK1_FULLON, 2,
+		       BD70528_INT_BUCK1_FULLON_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK2_FULLON, 2,
+		       BD70528_INT_BUCK2_FULLON_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_SHORTPUSH, 3, BD70528_INT_SHORTPUSH_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_AUTO_WAKEUP, 3,
+		       BD70528_INT_AUTO_WAKEUP_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_STATE_CHANGE, 3,
+		       BD70528_INT_STATE_CHANGE_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BAT_OV_RES, 4, BD70528_INT_BAT_OV_RES_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BAT_OV_DET, 4, BD70528_INT_BAT_OV_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DBAT_DET, 4, BD70528_INT_DBAT_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BATTSD_COLD_RES, 4,
+		       BD70528_INT_BATTSD_COLD_RES_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BATTSD_COLD_DET, 4,
+		       BD70528_INT_BATTSD_COLD_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BATTSD_HOT_RES, 4,
+		       BD70528_INT_BATTSD_HOT_RES_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BATTSD_HOT_DET, 4,
+		       BD70528_INT_BATTSD_HOT_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_CHG_TSD, 4, BD70528_INT_CHG_TSD_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BAT_RMV, 5, BD70528_INT_BAT_RMV_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BAT_DET, 5, BD70528_INT_BAT_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DCIN2_OV_RES, 5,
+		       BD70528_INT_DCIN2_OV_RES_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DCIN2_OV_DET, 5,
+		       BD70528_INT_DCIN2_OV_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DCIN2_RMV, 5, BD70528_INT_DCIN2_RMV_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DCIN2_DET, 5, BD70528_INT_DCIN2_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DCIN1_RMV, 5, BD70528_INT_DCIN1_RMV_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_DCIN1_DET, 5, BD70528_INT_DCIN1_DET_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_RTC_ALARM, 6, BD70528_INT_RTC_ALARM_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_ELPS_TIM, 6, BD70528_INT_ELPS_TIM_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_GPIO0, 7, BD70528_INT_GPIO0_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_GPIO1, 7, BD70528_INT_GPIO1_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_GPIO2, 7, BD70528_INT_GPIO2_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_GPIO3, 7, BD70528_INT_GPIO3_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK1_DVS_OPFAIL, 8,
+		       BD70528_INT_BUCK1_DVS_OPFAIL_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK2_DVS_OPFAIL, 8,
+		       BD70528_INT_BUCK2_DVS_OPFAIL_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_BUCK3_DVS_OPFAIL, 8,
+		       BD70528_INT_BUCK3_DVS_OPFAIL_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LED1_VOLT_OPFAIL, 8,
+		       BD70528_INT_LED1_VOLT_OPFAIL_MASK),
+	REGMAP_IRQ_REG(BD70528_INT_LED2_VOLT_OPFAIL, 8,
+		       BD70528_INT_LED2_VOLT_OPFAIL_MASK),
+};
+
+static struct regmap_irq_chip bd70528_irq_chip = {
+	.name = "bd70528_irq",
+	.main_status = BD70528_REG_INT_MAIN,
+	.irqs = &irqs[0],
+	.num_irqs = ARRAY_SIZE(irqs),
+	.status_base = BD70528_REG_INT_SHDN,
+	.mask_base = BD70528_REG_INT_SHDN_MASK,
+	.ack_base = BD70528_REG_INT_SHDN,
+	.type_base = BD70528_REG_GPIO1_IN,
+	.init_ack_masked = true,
+	.num_regs = 9,
+	.num_main_regs = 1,
+	.num_type_reg = 4,
+	.sub_reg_offsets = &bd70528_sub_irq_offsets[0],
+	.num_main_status_bits = 8,
+	.irq_reg_stride = 1,
+};
+
+#define WD_CTRL_MAGIC1 0x55
+#define WD_CTRL_MAGIC2 0xAA
+
+static int bd70528_wdt_set(struct bd70528 *bd70528, int enable, int *old_state)
+{
+	int ret, i;
+	unsigned int tmp;
+	u8 wd_ctrl_arr[3] = { WD_CTRL_MAGIC1, WD_CTRL_MAGIC2, 0 };
+	u8 *wd_ctrl = &wd_ctrl_arr[2];
+
+	ret = regmap_read(bd70528->chip.regmap, BD70528_REG_WDT_CTRL, &tmp);
+	if (ret)
+		return ret;
+
+	*wd_ctrl = (u8)tmp;
+
+	if (old_state) {
+		if (*wd_ctrl & BD70528_MASK_WDT_EN)
+			*old_state |= BD70528_WDT_STATE_BIT;
+		else
+			*old_state &= ~BD70528_WDT_STATE_BIT;
+		if ((!enable) == (!(*old_state & BD70528_WDT_STATE_BIT)))
+			return 0;
+	}
+
+	if (enable) {
+		if (*wd_ctrl & BD70528_MASK_WDT_EN)
+			return 0;
+		*wd_ctrl |= BD70528_MASK_WDT_EN;
+	} else {
+		if (*wd_ctrl & BD70528_MASK_WDT_EN)
+			*wd_ctrl &= ~BD70528_MASK_WDT_EN;
+		else
+			return 0;
+	}
+
+	for (i = 0; i < 3; i++) {
+		ret = regmap_write(bd70528->chip.regmap, BD70528_REG_WDT_CTRL,
+				   wd_ctrl_arr[i]);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(bd70528->chip.regmap, BD70528_REG_WDT_CTRL, &tmp);
+	if ((tmp & BD70528_MASK_WDT_EN) != (*wd_ctrl & BD70528_MASK_WDT_EN)) {
+		dev_err(bd70528->chip.dev,
+			"Watchdog ctrl mismatch (hw) 0x%x (set) 0x%x\n",
+			tmp, *wd_ctrl);
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int bd70528_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct bd70528 *bd70528;
+	struct regmap_irq_chip_data *irq_data;
+	int ret, i;
+	struct mutex *rtc_mutex;
+
+	if (!i2c->irq) {
+		dev_err(&i2c->dev, "No IRQ configured\n");
+		return -EINVAL;
+	}
+	bd70528 = devm_kzalloc(&i2c->dev, sizeof(*bd70528), GFP_KERNEL);
+
+	if (!bd70528)
+		return -ENOMEM;
+
+	mutex_init(&bd70528->rtc_timer_lock);
+
+	dev_set_drvdata(&i2c->dev, bd70528);
+	bd70528->chip.chip_type = ROHM_CHIP_TYPE_BD70528;
+	bd70528->wdt_set = bd70528_wdt_set;
+	bd70528->chip.regmap = devm_regmap_init_i2c(i2c, &bd70528_regmap);
+	if (IS_ERR(bd70528->chip.regmap)) {
+		dev_err(&i2c->dev, "regmap initialization failed\n");
+		return PTR_ERR(bd70528->chip.regmap);
+	}
+
+	/*
+	 * Disallow type setting for all IRQs by default as
+	 *  most of them do not support setting type.
+	 */
+	for (i = 0; i < ARRAY_SIZE(irqs); i++)
+		irqs[i].type.types_supported = 0;
+
+	irqs[BD70528_INT_GPIO0].type.type_reg_offset = 0;
+	irqs[BD70528_INT_GPIO0].type.type_rising_val = 0x20;
+	irqs[BD70528_INT_GPIO0].type.type_falling_val = 0x10;
+	irqs[BD70528_INT_GPIO0].type.type_level_high_val = 0x40;
+	irqs[BD70528_INT_GPIO0].type.type_level_low_val = 0x50;
+	irqs[BD70528_INT_GPIO0].type.types_supported = (IRQ_TYPE_EDGE_BOTH |
+				IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
+	irqs[BD70528_INT_GPIO1].type.type_reg_offset = 2;
+	irqs[BD70528_INT_GPIO1].type.type_rising_val = 0x20;
+	irqs[BD70528_INT_GPIO1].type.type_falling_val = 0x10;
+	irqs[BD70528_INT_GPIO1].type.type_level_high_val = 0x40;
+	irqs[BD70528_INT_GPIO1].type.type_level_low_val = 0x50;
+	irqs[BD70528_INT_GPIO1].type.types_supported = (IRQ_TYPE_EDGE_BOTH |
+				IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
+	irqs[BD70528_INT_GPIO2].type.type_reg_offset = 4;
+	irqs[BD70528_INT_GPIO2].type.type_rising_val = 0x20;
+	irqs[BD70528_INT_GPIO2].type.type_falling_val = 0x10;
+	irqs[BD70528_INT_GPIO2].type.type_level_high_val = 0x40;
+	irqs[BD70528_INT_GPIO2].type.type_level_low_val = 0x50;
+	irqs[BD70528_INT_GPIO2].type.types_supported = (IRQ_TYPE_EDGE_BOTH |
+				IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
+	irqs[BD70528_INT_GPIO3].type.type_reg_offset = 6;
+	irqs[BD70528_INT_GPIO3].type.type_rising_val = 0x20;
+	irqs[BD70528_INT_GPIO3].type.type_falling_val = 0x10;
+	irqs[BD70528_INT_GPIO3].type.type_level_high_val = 0x40;
+	irqs[BD70528_INT_GPIO3].type.type_level_low_val = 0x50;
+	irqs[BD70528_INT_GPIO3].type.types_supported = (IRQ_TYPE_EDGE_BOTH |
+				IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
+
+	ret = devm_regmap_add_irq_chip(&i2c->dev, bd70528->chip.regmap,
+				       i2c->irq, IRQF_ONESHOT, 0,
+				       &bd70528_irq_chip, &irq_data);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to add irq_chip\n");
+		return ret;
+	}
+	dev_dbg(&i2c->dev, "Registered %d irqs for chip\n",
+			bd70528_irq_chip.num_irqs);
+
+	/*
+	 * BD70528 irq controller is not touching the main mask register.
+	 * So enable the GPIO block interrupts at main level. We can just
+	 * leave them enabled as irq-controller should disable irqs
+	 * from sub-registers when IRQ is disabled or freed.
+	 */
+	ret = regmap_update_bits(bd70528->chip.regmap,
+				 BD70528_REG_INT_MAIN_MASK,
+				 BD70528_INT_GPIO_MASK, 0);
+
+	ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
+				   bd70528_mfd_cells,
+				   ARRAY_SIZE(bd70528_mfd_cells), NULL, 0,
+				   regmap_irq_get_domain(irq_data));
+	if (ret)
+		dev_err(&i2c->dev, "Failed to create subdevices\n");
+
+	return ret;
+}
+
+static const struct of_device_id bd70528_of_match[] = {
+	{
+		.compatible = "rohm,bd70528",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bd70528_of_match);
+
+static struct i2c_driver bd70528_drv = {
+	.driver = {
+		.name = "rohm-bd70528",
+		.of_match_table = bd70528_of_match,
+	},
+	.probe = &bd70528_i2c_probe,
+};
+
+static int __init bd70528_init(void)
+{
+	return i2c_add_driver(&bd70528_drv);
+}
+subsys_initcall(bd70528_init);
+
+static void __exit bd70528_exit(void)
+{
+	i2c_del_driver(&bd70528_drv);
+}
+module_exit(bd70528_exit);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD70528 Power Management IC driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/rohm-bd70528.h b/include/linux/mfd/rohm-bd70528.h
new file mode 100644
index 000000000000..576b672870b7
--- /dev/null
+++ b/include/linux/mfd/rohm-bd70528.h
@@ -0,0 +1,392 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright (C) 2018 ROHM Semiconductors */
+
+#ifndef __LINUX_MFD_BD70528_H__
+#define __LINUX_MFD_BD70528_H__
+
+#include <linux/device.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/regmap.h>
+
+struct bd70528 {
+	/*
+	 * Please keep this as the first member here as some
+	 * drivers (clk) supporting more than one chip may only know this
+	 * generic struct 'struct rohm_regmap_dev' and assume it is
+	 * the first chunk of parent device's private data.
+	 */
+	struct rohm_regmap_dev chip;
+	/* wdt_set must be called rtc_timer_lock held */
+	int (*wdt_set)(struct bd70528 *bd70528, int enable, int *old_state);
+	struct mutex rtc_timer_lock;
+};
+
+enum {
+	BD70528_BUCK1,
+	BD70528_BUCK2,
+	BD70528_BUCK3,
+	BD70528_LDO1,
+	BD70528_LDO2,
+	BD70528_LDO3,
+	BD70528_LED1,
+	BD70528_LED2,
+};
+
+#define BD70528_BUCK_VOLTS 17
+#define BD70528_BUCK_VOLTS 17
+#define BD70528_BUCK_VOLTS 17
+#define BD70528_LDO_VOLTS 0x20
+
+#define BD70528_REG_BUCK1_EN	0x0F
+#define BD70528_REG_BUCK1_VOLT	0x15
+#define BD70528_REG_BUCK2_EN	0x10
+#define BD70528_REG_BUCK2_VOLT	0x16
+#define BD70528_REG_BUCK3_EN	0x11
+#define BD70528_REG_BUCK3_VOLT	0x17
+#define BD70528_REG_LDO1_EN	0x1b
+#define BD70528_REG_LDO1_VOLT	0x1e
+#define BD70528_REG_LDO2_EN	0x1c
+#define BD70528_REG_LDO2_VOLT	0x1f
+#define BD70528_REG_LDO3_EN	0x1d
+#define BD70528_REG_LDO3_VOLT	0x20
+#define BD70528_REG_LED_CTRL	0x2b
+#define BD70528_REG_LED_VOLT	0x29
+#define BD70528_REG_LED_EN	0x2a
+
+/* main irq registers */
+#define BD70528_REG_INT_MAIN	0x7E
+#define BD70528_REG_INT_MAIN_MASK 0x74
+
+/* 'sub irq' registers */
+#define BD70528_REG_INT_SHDN	0x7F
+#define BD70528_REG_INT_PWR_FLT	0x80
+#define BD70528_REG_INT_VR_FLT	0x81
+#define BD70528_REG_INT_MISC	0x82
+#define BD70528_REG_INT_BAT1	0x83
+#define BD70528_REG_INT_BAT2	0x84
+#define BD70528_REG_INT_RTC	0x85
+#define BD70528_REG_INT_GPIO	0x86
+#define BD70528_REG_INT_OP_FAIL	0x87
+
+#define BD70528_REG_INT_SHDN_MASK	0x75
+#define BD70528_REG_INT_PWR_FLT_MASK	0x76
+#define BD70528_REG_INT_VR_FLT_MASK	0x77
+#define BD70528_REG_INT_MISC_MASK	0x78
+#define BD70528_REG_INT_BAT1_MASK	0x79
+#define BD70528_REG_INT_BAT2_MASK	0x7a
+#define BD70528_REG_INT_RTC_MASK	0x7b
+#define BD70528_REG_INT_GPIO_MASK	0x7c
+#define BD70528_REG_INT_OP_FAIL_MASK	0x7d
+
+/* Reset related 'magic' registers */
+#define BD70528_REG_SHIPMODE	0x03
+#define BD70528_REG_HWRESET	0x04
+#define BD70528_REG_WARMRESET	0x05
+#define BD70528_REG_STANDBY	0x06
+
+/* GPIO registers */
+#define BD70528_REG_GPIO_STATE	0x8F
+
+#define BD70528_REG_GPIO1_IN	0x4d
+#define BD70528_REG_GPIO2_IN	0x4f
+#define BD70528_REG_GPIO3_IN	0x51
+#define BD70528_REG_GPIO4_IN	0x53
+#define BD70528_REG_GPIO1_OUT	0x4e
+#define BD70528_REG_GPIO2_OUT	0x50
+#define BD70528_REG_GPIO3_OUT	0x52
+#define BD70528_REG_GPIO4_OUT	0x54
+
+/* clk control */
+
+#define BD70528_REG_CLK_OUT	0x2c
+
+/* RTC */
+
+#define BD70528_REG_RTC_COUNT_H		0x2d
+#define BD70528_REG_RTC_COUNT_L		0x2e
+#define BD70528_REG_RTC_SEC		0x2f
+#define BD70528_REG_RTC_MINUTE		0x30
+#define BD70528_REG_RTC_HOUR		0x31
+#define BD70528_REG_RTC_WEEK		0x32
+#define BD70528_REG_RTC_DAY		0x33
+#define BD70528_REG_RTC_MONTH		0x34
+#define BD70528_REG_RTC_YEAR		0x35
+
+#define BD70528_REG_RTC_ALM_SEC		0x36
+#define BD70528_REG_RTC_ALM_START	BD70528_REG_RTC_ALM_SEC
+#define BD70528_REG_RTC_ALM_MINUTE	0x37
+#define BD70528_REG_RTC_ALM_HOUR	0x38
+#define BD70528_REG_RTC_ALM_WEEK	0x39
+#define BD70528_REG_RTC_ALM_DAY		0x3a
+#define BD70528_REG_RTC_ALM_MONTH	0x3b
+#define BD70528_REG_RTC_ALM_YEAR	0x3c
+#define BD70528_REG_RTC_ALM_MASK	0x3d
+#define BD70528_REG_RTC_ALM_REPEAT	0x3e
+#define BD70528_REG_RTC_START		BD70528_REG_RTC_SEC
+
+#define BD70528_REG_RTC_WAKE_SEC	0x43
+#define BD70528_REG_RTC_WAKE_START	BD70528_REG_RTC_WAKE_SEC
+#define BD70528_REG_RTC_WAKE_MIN	0x44
+#define BD70528_REG_RTC_WAKE_HOUR	0x45
+#define BD70528_REG_RTC_WAKE_CTRL	0x46
+
+#define BD70528_REG_ELAPSED_TIMER_EN	0x42
+#define BD70528_REG_WAKE_EN		0x46
+
+/* WDT registers */
+#define BD70528_REG_WDT_CTRL		0x4A
+#define BD70528_REG_WDT_HOUR		0x49
+#define BD70528_REG_WDT_MINUTE		0x48
+#define BD70528_REG_WDT_SEC		0x47
+
+/* Charger / Battery */
+#define BD70528_REG_CHG_CURR_STAT	0x59
+#define BD70528_REG_CHG_BAT_STAT	0x57
+#define BD70528_REG_CHG_BAT_TEMP	0x58
+#define BD70528_REG_CHG_IN_STAT		0x56
+#define BD70528_REG_CHG_DCIN_ILIM	0x5d
+#define BD70528_REG_CHG_CHG_CURR_WARM	0x61
+#define BD70528_REG_CHG_CHG_CURR_COLD	0x62
+
+
+/* Masks for main IRQ register bits */
+enum {
+	BD70528_INT_SHDN,
+#define BD70528_INT_SHDN_MASK (1<<BD70528_INT_SHDN)
+	BD70528_INT_PWR_FLT,
+#define BD70528_INT_PWR_FLT_MASK (1<<BD70528_INT_PWR_FLT)
+	BD70528_INT_VR_FLT,
+#define BD70528_INT_VR_FLT_MASK (1<<BD70528_INT_VR_FLT)
+	BD70528_INT_MISC,
+#define BD70528_INT_MISC_MASK (1<<BD70528_INT_MISC)
+	BD70528_INT_BAT1,
+#define BD70528_INT_BAT1_MASK (1<<BD70528_INT_BAT1)
+	BD70528_INT_RTC,
+#define BD70528_INT_RTC_MASK (1<<BD70528_INT_RTC)
+	BD70528_INT_GPIO,
+#define BD70528_INT_GPIO_MASK (1<<BD70528_INT_GPIO)
+	BD70528_INT_OP_FAIL,
+#define BD70528_INT_OP_FAIL_MASK (1<<BD70528_INT_OP_FAIL)
+};
+
+/* IRQs */
+enum {
+	/* Shutdown register IRQs */
+	BD70528_INT_LONGPUSH,
+	BD70528_INT_WDT,
+	BD70528_INT_HWRESET,
+	BD70528_INT_RSTB_FAULT,
+	BD70528_INT_VBAT_UVLO,
+	BD70528_INT_TSD,
+	BD70528_INT_RSTIN,
+	/* Power failure register IRQs */
+	BD70528_INT_BUCK1_FAULT,
+	BD70528_INT_BUCK2_FAULT,
+	BD70528_INT_BUCK3_FAULT,
+	BD70528_INT_LDO1_FAULT,
+	BD70528_INT_LDO2_FAULT,
+	BD70528_INT_LDO3_FAULT,
+	BD70528_INT_LED1_FAULT,
+	BD70528_INT_LED2_FAULT,
+	/* VR FAULT register IRQs */
+	BD70528_INT_BUCK1_OCP,
+	BD70528_INT_BUCK2_OCP,
+	BD70528_INT_BUCK3_OCP,
+	BD70528_INT_LED1_OCP,
+	BD70528_INT_LED2_OCP,
+	BD70528_INT_BUCK1_FULLON,
+	BD70528_INT_BUCK2_FULLON,
+	/* PMU register interrupts */
+	BD70528_INT_SHORTPUSH,
+	BD70528_INT_AUTO_WAKEUP,
+	BD70528_INT_STATE_CHANGE,
+	/* Charger 1 register IRQs */
+	BD70528_INT_BAT_OV_RES,
+	BD70528_INT_BAT_OV_DET,
+	BD70528_INT_DBAT_DET,
+	BD70528_INT_BATTSD_COLD_RES,
+	BD70528_INT_BATTSD_COLD_DET,
+	BD70528_INT_BATTSD_HOT_RES,
+	BD70528_INT_BATTSD_HOT_DET,
+	BD70528_INT_CHG_TSD,
+	/* Charger 2 register IRQs */
+	BD70528_INT_BAT_RMV,
+	BD70528_INT_BAT_DET,
+	BD70528_INT_DCIN2_OV_RES,
+	BD70528_INT_DCIN2_OV_DET,
+	BD70528_INT_DCIN2_RMV,
+	BD70528_INT_DCIN2_DET,
+	BD70528_INT_DCIN1_RMV,
+	BD70528_INT_DCIN1_DET,
+	/* RTC register IRQs */
+	BD70528_INT_RTC_ALARM,
+	BD70528_INT_ELPS_TIM,
+	/* GPIO register IRQs */
+	BD70528_INT_GPIO0,
+	BD70528_INT_GPIO1,
+	BD70528_INT_GPIO2,
+	BD70528_INT_GPIO3,
+	/* Invalid operation register IRQs */
+	BD70528_INT_BUCK1_DVS_OPFAIL,
+	BD70528_INT_BUCK2_DVS_OPFAIL,
+	BD70528_INT_BUCK3_DVS_OPFAIL,
+	BD70528_INT_LED1_VOLT_OPFAIL,
+	BD70528_INT_LED2_VOLT_OPFAIL,
+};
+
+/* Masks */
+#define BD70528_INT_LONGPUSH_MASK 0x1
+#define BD70528_INT_WDT_MASK 0x2
+#define BD70528_INT_HWRESET_MASK 0x4
+#define BD70528_INT_RSTB_FAULT_MASK 0x8
+#define BD70528_INT_VBAT_UVLO_MASK 0x10
+#define BD70528_INT_TSD_MASK 0x20
+#define BD70528_INT_RSTIN_MASK 0x40
+
+#define BD70528_INT_BUCK1_FAULT_MASK 0x1
+#define BD70528_INT_BUCK2_FAULT_MASK 0x2
+#define BD70528_INT_BUCK3_FAULT_MASK 0x4
+#define BD70528_INT_LDO1_FAULT_MASK 0x8
+#define BD70528_INT_LDO2_FAULT_MASK 0x10
+#define BD70528_INT_LDO3_FAULT_MASK 0x20
+#define BD70528_INT_LED1_FAULT_MASK 0x40
+#define BD70528_INT_LED2_FAULT_MASK 0x80
+
+#define BD70528_INT_BUCK1_OCP_MASK 0x1
+#define BD70528_INT_BUCK2_OCP_MASK 0x2
+#define BD70528_INT_BUCK3_OCP_MASK 0x4
+#define BD70528_INT_LED1_OCP_MASK 0x8
+#define BD70528_INT_LED2_OCP_MASK 0x10
+#define BD70528_INT_BUCK1_FULLON_MASK 0x20
+#define BD70528_INT_BUCK2_FULLON_MASK 0x40
+
+#define BD70528_INT_SHORTPUSH_MASK 0x1
+#define BD70528_INT_AUTO_WAKEUP_MASK 0x2
+#define BD70528_INT_STATE_CHANGE_MASK 0x10
+
+#define BD70528_INT_BAT_OV_RES_MASK 0x1
+#define BD70528_INT_BAT_OV_DET_MASK 0x2
+#define BD70528_INT_DBAT_DET_MASK 0x4
+#define BD70528_INT_BATTSD_COLD_RES_MASK 0x8
+#define BD70528_INT_BATTSD_COLD_DET_MASK 0x10
+#define BD70528_INT_BATTSD_HOT_RES_MASK 0x20
+#define BD70528_INT_BATTSD_HOT_DET_MASK 0x40
+#define BD70528_INT_CHG_TSD_MASK 0x80
+
+#define BD70528_INT_BAT_RMV_MASK 0x1
+#define BD70528_INT_BAT_DET_MASK 0x2
+#define BD70528_INT_DCIN2_OV_RES_MASK 0x4
+#define BD70528_INT_DCIN2_OV_DET_MASK 0x8
+#define BD70528_INT_DCIN2_RMV_MASK 0x10
+#define BD70528_INT_DCIN2_DET_MASK 0x20
+#define BD70528_INT_DCIN1_RMV_MASK 0x40
+#define BD70528_INT_DCIN1_DET_MASK 0x80
+
+#define BD70528_INT_RTC_ALARM_MASK 0x1
+#define BD70528_INT_ELPS_TIM_MASK 0x2
+
+#define BD70528_INT_GPIO0_MASK 0x1
+#define BD70528_INT_GPIO1_MASK 0x2
+#define BD70528_INT_GPIO2_MASK 0x4
+#define BD70528_INT_GPIO3_MASK 0x8
+
+#define BD70528_INT_BUCK1_DVS_OPFAIL_MASK 0x1
+#define BD70528_INT_BUCK2_DVS_OPFAIL_MASK 0x2
+#define BD70528_INT_BUCK3_DVS_OPFAIL_MASK 0x4
+#define BD70528_INT_LED1_VOLT_OPFAIL_MASK 0x10
+#define BD70528_INT_LED2_VOLT_OPFAIL_MASK 0x20
+
+#define BD70528_DEBOUNCE_MASK 0x3
+
+#define BD70528_DEBOUNCE_DISABLE 0
+#define BD70528_DEBOUNCE_15MS 1
+#define BD70528_DEBOUNCE_30MS 2
+#define BD70528_DEBOUNCE_50MS 3
+
+#define BD70528_GPIO_DRIVE_MASK 0x2
+#define BD70528_GPIO_PUSH_PULL 0x0
+#define BD70528_GPIO_OPEN_DRAIN 0x2
+
+#define BD70528_GPIO_OUT_EN_MASK 0x80
+#define BD70528_GPIO_OUT_ENABLE 0x80
+#define BD70528_GPIO_OUT_DISABLE 0x0
+
+#define BD70528_GPIO_OUT_HI 0x1
+#define BD70528_GPIO_OUT_LO 0x0
+#define BD70528_GPIO_OUT_MASK 0x1
+
+#define BD70528_GPIO_IN_STATE_BASE 1
+
+#define BD70528_CLK_OUT_EN_MASK 0x1
+
+/* RTC masks to mask out reserved bits */
+
+#define BD70528_MASK_RTC_SEC		0x7f
+#define BD70528_MASK_RTC_MINUTE		0x7f
+#define BD70528_MASK_RTC_HOUR_24H	0x80
+#define BD70528_MASK_RTC_HOUR_PM	0x20
+#define BD70528_MASK_RTC_HOUR		0x1f
+#define BD70528_MASK_RTC_DAY		0x3f
+#define BD70528_MASK_RTC_WEEK		0x07
+#define BD70528_MASK_RTC_MONTH		0x1f
+#define BD70528_MASK_RTC_YEAR		0xff
+#define BD70528_MASK_RTC_COUNT_L	0x7f
+
+#define BD70528_MASK_ELAPSED_TIMER_EN	0x1
+/* Mask second, min and hour fields
+ * HW would support ALM irq for over 24h
+ * (by setting day, month and year too)
+ * but as we wish to keep this same as for
+ * wake-up we limit ALM to 24H and only
+ * unmask sec, min and hour
+ */
+#define BD70528_MASK_ALM_EN		0x7
+#define BD70528_MASK_WAKE_EN		0x1
+
+/* WDT masks */
+#define BD70528_MASK_WDT_EN		0x1
+#define BD70528_MASK_WDT_HOUR		0x1
+#define BD70528_MASK_WDT_MINUTE		0x7f
+#define BD70528_MASK_WDT_SEC		0x7f
+
+#define BD70528_WDT_STATE_BIT		0x1
+#define BD70528_ELAPSED_STATE_BIT	0x2
+#define BD70528_WAKE_STATE_BIT		0x4
+
+/* Charger masks */
+#define BD70528_MASK_CHG_STAT		0x7f
+#define BD70528_MASK_CHG_BAT_TIMER	0x20
+#define BD70528_MASK_CHG_BAT_OVERVOLT	0x10
+#define BD70528_MASK_CHG_BAT_DETECT	0x1
+#define BD70528_MASK_CHG_DCIN1_UVLO	0x1
+#define BD70528_MASK_CHG_DCIN_ILIM	0x3f
+#define BD70528_MASK_CHG_CHG_CURR	0x1f
+#define BD70528_MASK_CHG_TRICKLE_CURR	0x10
+
+/*
+ * Note, external battery register is the lonely rider at
+ * address 0xc5. See how to stuff that in the regmap
+ */
+#define BD70528_MAX_REGISTER 0x94
+
+/* Buck control masks */
+#define BD70528_MASK_RUN_EN	0x4
+#define BD70528_MASK_STBY_EN	0x2
+#define BD70528_MASK_IDLE_EN	0x1
+#define BD70528_MASK_LED1_EN	0x1
+#define BD70528_MASK_LED2_EN	0x10
+
+#define BD70528_MASK_BUCK_VOLT	0xf
+#define BD70528_MASK_LDO_VOLT	0x1f
+#define BD70528_MASK_LED1_VOLT	0x1
+#define BD70528_MASK_LED2_VOLT	0x10
+
+/* Misc irq masks */
+#define BD70528_INT_MASK_SHORT_PUSH	1
+#define BD70528_INT_MASK_AUTO_WAKE	2
+#define BD70528_INT_MASK_POWER_STATE	4
+
+#define BD70528_MASK_BUCK_RAMP 0x10
+#define BD70528_SIFT_BUCK_RAMP 4
+
+#endif /* __LINUX_MFD_BD70528_H__ */
-- 
2.14.3


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes.  Just then, he vanished ~~~

  parent reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-05  9:03 [PATCH v6 00/10] support ROHM BD70528 PMIC Matti Vaittinen
2019-02-05  9:04 ` [PATCH v6 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts Matti Vaittinen
2019-02-05  9:04 ` [PATCH v6 02/10] regulator: bd718x7 use chip specific and generic data structs Matti Vaittinen
2019-02-05  9:05 ` [PATCH v6 03/10] clk: bd718x7: " Matti Vaittinen
2019-02-05  9:05 ` Matti Vaittinen [this message]
2019-02-05  9:05 ` [PATCH v6 05/10] clk: bd718x7: Support ROHM BD70528 clk block Matti Vaittinen
2019-02-05  9:06 ` [PATCH v6 06/10] devicetree: bindings: Document first ROHM BD70528 bindings Matti Vaittinen
2019-02-05  9:06 ` [PATCH v6 07/10] gpio: Initial support for ROHM bd70528 GPIO block Matti Vaittinen
2019-02-05  9:07 ` [PATCH v6 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC Matti Vaittinen
2019-02-05  9:07 ` [PATCH v6 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block Matti Vaittinen
2019-02-05  9:09 ` [PATCH v6 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block Matti Vaittinen
2019-02-05 15:14   ` Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8fab160ffe0d736dbff0cbcf33ef91b90ee603fb.1549356505.git.matti.vaittinen@fi.rohmeurope.com \
    --to=matti.vaittinen@fi.rohmeurope.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.haikola@fi.rohmeurope.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=mazziesaccount@gmail.com \
    --cc=mikko.mutanen@fi.rohmeurope.com \
    --cc=mturquette@baylibre.com \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sre@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org linux-clk@archiver.kernel.org
	public-inbox-index linux-clk


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/ public-inbox