Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: linux-rpi-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Phil Elwell <phil@raspberrypi.com>,
	Mike Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	linux-clk@vger.kernel.org, Philipp Zabel <p.zabel@pengutronix.de>,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v5 18/27] clk: bcm: rpi: Make the PLLB registration function return a clk_hw
Date: Mon, 15 Jun 2020 10:40:58 +0200
Message-ID: <97218559db643e62fdd2b5e3046a2a05b8c2e769.1592210452.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.98f979c2af2337c57217016d21d7c68e1ac2ce8a.1592210452.git-series.maxime@cerno.tech>

The raspberrypi_register_pllb has been returning an integer so far to
notify whether the functions has exited successfully or not.

However, the OF provider functions in the clock framework require access to
the clk_hw structure so that we can expose those clocks to device tree
consumers.

Since we'll want that for the future clocks, let's return a clk_hw pointer
instead of the return code.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/bcm/clk-raspberrypi.c | 46 ++++++++++++++++----------------
 1 file changed, 24 insertions(+), 22 deletions(-)

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 19571602ba64..d2cb90c086a7 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -186,7 +186,7 @@ static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
 	.determine_rate = raspberrypi_pll_determine_rate,
 };
 
-static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
+static struct clk_hw *raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
 {
 	struct raspberrypi_clk_data *data;
 	struct clk_init_data init = {};
@@ -195,7 +195,7 @@ static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
 
 	data = devm_kzalloc(rpi->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 	data->rpi = rpi;
 	data->id = RPI_FIRMWARE_ARM_CLK_ID;
 
@@ -213,7 +213,7 @@ static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
 	if (ret) {
 		dev_err(rpi->dev, "Failed to get %s min freq: %d\n",
 			init.name, ret);
-		return ret;
+		return ERR_PTR(ret);
 	}
 
 	ret = raspberrypi_clock_property(rpi->firmware, data,
@@ -222,13 +222,13 @@ static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
 	if (ret) {
 		dev_err(rpi->dev, "Failed to get %s max freq: %d\n",
 			init.name, ret);
-		return ret;
+		return ERR_PTR(ret);
 	}
 
 	if (!min_rate || !max_rate) {
 		dev_err(rpi->dev, "Unexpected frequency range: min %u, max %u\n",
 			min_rate, max_rate);
-		return -EINVAL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n",
@@ -237,12 +237,14 @@ static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
 	data->hw.init = &init;
 
 	ret = devm_clk_hw_register(rpi->dev, &data->hw);
-	if (!ret)
-		clk_hw_set_rate_range(&data->hw,
-				      min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE,
-				      max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE);
+	if (ret)
+		return ERR_PTR(ret);
 
-	return ret;
+	clk_hw_set_rate_range(&data->hw,
+			      min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE,
+			      max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE);
+
+	return &data->hw;
 }
 
 static struct clk_fixed_factor raspberrypi_clk_pllb_arm = {
@@ -257,14 +259,14 @@ static struct clk_fixed_factor raspberrypi_clk_pllb_arm = {
 	},
 };
 
-static int raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi)
+static struct clk_hw *raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi)
 {
 	int ret;
 
 	ret = devm_clk_hw_register(rpi->dev, &raspberrypi_clk_pllb_arm.hw);
 	if (ret) {
 		dev_err(rpi->dev, "Failed to initialize pllb_arm\n");
-		return ret;
+		return ERR_PTR(ret);
 	}
 
 	ret = devm_clk_hw_register_clkdev(rpi->dev,
@@ -272,10 +274,10 @@ static int raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi)
 					  NULL, "cpu0");
 	if (ret) {
 		dev_err(rpi->dev, "Failed to initialize clkdev\n");
-		return ret;
+		return ERR_PTR(ret);
 	}
 
-	return 0;
+	return &raspberrypi_clk_pllb_arm.hw;
 }
 
 static int raspberrypi_clk_probe(struct platform_device *pdev)
@@ -284,7 +286,7 @@ static int raspberrypi_clk_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct rpi_firmware *firmware;
 	struct raspberrypi_clk *rpi;
-	int ret;
+	struct clk_hw *hw;
 
 	/*
 	 * We can be probed either through the an old-fashioned
@@ -314,15 +316,15 @@ static int raspberrypi_clk_probe(struct platform_device *pdev)
 	rpi->firmware = firmware;
 	platform_set_drvdata(pdev, rpi);
 
-	ret = raspberrypi_register_pllb(rpi);
-	if (ret) {
-		dev_err(dev, "Failed to initialize pllb, %d\n", ret);
-		return ret;
+	hw = raspberrypi_register_pllb(rpi);
+	if (IS_ERR(hw)) {
+		dev_err(dev, "Failed to initialize pllb, %ld\n", PTR_ERR(hw));
+		return PTR_ERR(hw);
 	}
 
-	ret = raspberrypi_register_pllb_arm(rpi);
-	if (ret)
-		return ret;
+	hw = raspberrypi_register_pllb_arm(rpi);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
 
 	rpi->cpufreq = platform_device_register_data(dev, "raspberrypi-cpufreq",
 						     -1, NULL, 0);
-- 
git-series 0.9.1

  parent reply index

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-15  8:40 [PATCH v5 00/27] clk: bcm: rpi: Add support for BCM2711 firmware clocks Maxime Ripard
2020-06-15  8:40 ` [PATCH v5 01/27] dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 02/27] dt-bindings: clock: Add a binding for the RPi Firmware clocks Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 03/27] firmware: rpi: Only create clocks device if we don't have a node for it Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 04/27] clk: bcm: rpi: Allow the driver to be probed by DT Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 05/27] clk: bcm: rpi: Statically init clk_init_data Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 06/27] clk: bcm: rpi: Use clk_hw_register for pllb_arm Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 07/27] clk: bcm: rpi: Remove global pllb_arm clock pointer Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 08/27] clk: bcm: rpi: Make sure pllb_arm is removed Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 09/27] clk: bcm: rpi: Remove pllb_arm_lookup global pointer Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-25  0:44   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 10/27] clk: bcm: rpi: Switch to clk_hw_register_clkdev Maxime Ripard
2020-06-25  0:44   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 11/27] clk: bcm: rpi: Make sure the clkdev lookup is removed Maxime Ripard
2020-06-25  0:44   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 12/27] clk: bcm: rpi: Use CCF boundaries instead of rolling our own Maxime Ripard
2020-06-25  0:44   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 13/27] clk: bcm: rpi: Create a data structure for the clocks Maxime Ripard
2020-06-25  0:44   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 14/27] clk: bcm: rpi: Add clock id to data Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 15/27] clk: bcm: rpi: Pass the clocks data to the firmware function Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 16/27] clk: bcm: rpi: Rename is_prepared function Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 17/27] clk: bcm: rpi: Split pllb clock hooks Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:40 ` Maxime Ripard [this message]
2020-06-25  0:45   ` [PATCH v5 18/27] clk: bcm: rpi: Make the PLLB registration function return a clk_hw Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 19/27] clk: bcm: rpi: Add DT provider for the clocks Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 20/27] clk: bcm: rpi: Add an enum for the firmware clocks Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 21/27] clk: bcm: rpi: Discover " Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 22/27] clk: bcm: rpi: Give firmware clocks a name Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 23/27] Revert "clk: bcm2835: remove pllb" Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 24/27] ARM: dts: bcm2711: Add firmware clocks node Maxime Ripard
2020-06-25  8:16   ` Nicolas Saenz Julienne
2020-06-15  8:41 ` [PATCH v5 25/27] clk: bcm2835: Allow custom CCF flags for the PLLs Maxime Ripard
2020-06-25  0:46   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 26/27] clk: bcm2835: Don't cache the PLLB rate Maxime Ripard
2020-06-25  0:46   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 27/27] clk: bcm: rpi: Remove the quirks for the CPU clock Maxime Ripard
2020-06-25  0:46   ` Stephen Boyd
2020-06-19  9:37 ` [PATCH v5 00/27] clk: bcm: rpi: Add support for BCM2711 firmware clocks Stephen Boyd
2020-06-19  9:44   ` Nicolas Saenz Julienne
2020-06-19 23:57     ` Stephen Boyd
2020-06-20  0:20       ` Stephen Boyd
2020-06-25  0:40         ` Stephen Boyd
2020-06-19 11:52   ` Maxime Ripard
2020-06-19 23:57     ` Stephen Boyd
2020-06-25  1:15 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=97218559db643e62fdd2b5e3046a2a05b8c2e769.1592210452.git-series.maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=p.zabel@pengutronix.de \
    --cc=phil@raspberrypi.com \
    --cc=sboyd@kernel.org \
    --cc=tim.gover@raspberrypi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git