messages from 2018-05-25 18:11:43 to 2018-05-31 07:17:17 UTC [more...]
[PATCH v4 0/6] mfd/regulator/clk: bd71837: ROHM BD71837 PMIC driver
2018-05-31 7:17 UTC (20+ messages)
` [PATCH v4 1/6] mfd: bd71837: mfd driver for ROHM BD71837 PMIC
` [PATCH v4 2/6] mfd: bd71837: Devicetree bindings "
` [PATCH v4 3/6] regulator: bd71837: Devicetree bindings for BD71837 regulators
` [PATCH v4 4/6] clk: bd71837: Devicetree bindings for ROHM BD71837 PMIC
` [PATCH v4 5/6] clk: bd71837: Add driver for BD71837 PMIC clock
` [PATCH v4 6/6] regulator: bd71837: BD71837 PMIC regulator driver
` Applied "regulator: bd71837: BD71837 PMIC regulator driver" to the regulator tree
[PATCH v2 2/6] mtd: rawnand: tegra: add devicetree binding
2018-05-31 6:42 UTC (4+ messages)
[PATCH v2 0/6] Add MCAN Support for dra76x
2018-05-31 6:15 UTC (19+ messages)
` [PATCH v2 1/6] ARM: dra762: hwmod: Add MCAN support
` [PATCH v2 2/6] ARM: dts: dra762: Add MCAN clock support
` [PATCH v2 3/6] clk: ti: dra7: Add clkctrl clock data for the mcan clocks
` [PATCH v2 4/6] bus: ti-sysc: Add support for using ti-sysc for MCAN on dra76x
` [PATCH v2 5/6] ARM: dts: Add generic interconnect target module node for MCAN
` [PATCH v2 6/6] ARM: dts: dra76x: Add MCAN node
[PATCH v2 0/2] clk: Add driver for MAX9485
2018-05-31 5:28 UTC (5+ messages)
` [PATCH v2 1/2] dts: clk: add devicetree bindings "
` [PATCH v2 2/2] clk: Add driver "
[PATCH v9 00/15] Krait clocks + Krait CPUfreq
2018-05-31 4:57 UTC (6+ messages)
` [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions
[PATCH 0/9] clk: davinci: outstanding fixes
2018-05-31 4:43 UTC (17+ messages)
` [PATCH 2/9] clk: davinci: pll-dm355: fix SYSCLKn parent names
` [PATCH 3/9] clk: davinci: psc-dm355: fix ASP0/1 clkdev lookups
` [PATCH 4/9] clk: davinci: pll-dm646x: keep PLL2 SYSCLK1 always enabled
` [PATCH 5/9] clk: davinci: psc-dm365: fix few clocks
` [PATCH 6/9] clk: davinci: pll: allow dev == NULL
` [PATCH 7/9] clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE
` [PATCH 8/9] clk: davinci: psc: allow for dev == NULL
` [PATCH 9/9] clk: davinci: Fix link errors when not all SoCs are enabled
[PATCH v4 0/7] ASoC: add driver for Atmel I2S controller
2018-05-31 0:58 UTC (3+ messages)
` [PATCH v4 1/7] dt-bindings: clk: at91: add an I2S mux clock
[PATCH RESEND V4 0/9] clk: add imx7ulp clk support
2018-05-31 0:53 UTC (3+ messages)
` [PATCH RESEND V4 6/9] dt-bindings: clock: add imx7ulp clock binding doc
[PATCH v2 0/3] Update Broadcom Stingray clock entries
2018-05-31 0:36 UTC (4+ messages)
` [PATCH v2 1/3] dt-bindings: clk: Update Stingray binding doc
` [PATCH v2 2/3] clk: bcm: Update and add Stingray clock entries
` [PATCH v2 3/3] arm64: dts: Update Stingray clock DT nodes
[PATCH 0/3] Update Broadcom Stingray clock entries
2018-05-31 0:23 UTC (4+ messages)
` [PATCH 2/3] clk: bcm: Update and add tingray "
[PATCH v7 00/10] drivers: Introduce firmware dnd clock river for ZynqMP core
2018-05-30 21:17 UTC (12+ messages)
` [PATCH v7 01/10] dt-bindings: firmware: Add bindings for ZynqMP firmware
` [PATCH v7 02/10] firmware: xilinx: Add Zynqmp firmware driver
` [PATCH v7 03/10] firmware: xilinx: Add zynqmp IOCTL API for device control
` [PATCH v7 04/10] firmware: xilinx: Add query data API
` [PATCH v7 05/10] firmware: xilinx: Add clock APIs
` [PATCH v7 06/10] firmware: xilinx: Add debugfs interface
` [PATCH v7 07/10] firmware: xilinx: Add debugfs for IOCTL API
` [PATCH v7 08/10] firmware: xilinx: Add debugfs for query data API
` [PATCH v7 09/10] dt-bindings: clock: Add bindings for ZynqMP clock driver
` [PATCH v7 10/10] drivers: clk: Add "
[PATCH v7 0/5] arm: Base support for Renesas RZN1D-DB Board
2018-05-30 19:49 UTC (7+ messages)
` [PATCH v7 3/5] ARM: dts: Renesas R9A06G032 base device tree file
` [PATCH v7 5/5] clk: renesas: Renesas R9A06G032 clock driver
[PATCH 1/5] clk: no need to check return value of debugfs_create functions
2018-05-30 19:39 UTC (7+ messages)
` [PATCH 2/5] clk: bcm2835: "
` [PATCH 3/5] clk: davinci: "
` [PATCH 4/5] clk: tegra: "
` [PATCH 5/5] clk: remove clk_debugfs_add_file()
Mismatch clk-bcm2835 debugfs and vcgencmd measure_clock
2018-05-30 18:27 UTC
[PATCH v2 0/5] crypto: ccree: cleanup, fixes and R-Car enabling
2018-05-30 16:28 UTC (12+ messages)
` [PATCH v2 1/5] crypto: ccree: correct host regs offset
` [PATCH v2 2/5] crypto: ccree: better clock handling
` [PATCH v2 3/5] crypto: ccree: silence debug prints
` [PATCH v2 4/5] clk: renesas: r8a7795: add ccree clock bindings
` [PATCH v2 5/5] arm64: dts: renesas: r8a7795: add ccree binding
[PATCH v2 0/6] mfd/regulator/clk: bd71837: ROHM BD71837 PMIC driver
2018-05-30 15:23 UTC (5+ messages)
[PATCH v1 0/4] Tegra20 External Memory Controller driver
2018-05-30 15:06 UTC (5+ messages)
` [PATCH v1 1/4] dt: bindings: tegra20-emc: Document interrupt property
` [PATCH v1 2/4] ARM: dts: tegra20: Add interrupt to External Memory Controller
` [PATCH v1 3/4] clk: tegra20: Turn EMC clock gate into divider
` [PATCH v1 4/4] memory: tegra: Introduce Tegra20 EMC driver
[PATCH v6 0/6] arm: Base support for Renesas RZN1D-DB Board
2018-05-30 13:49 UTC (10+ messages)
` [PATCH v6 2/6] dt-bindings: Add the rzn1-clocks.h file
[PATCH v2 3/6] regulator: bd71837: Devicetree bindings for BD71837 regulators
2018-05-30 11:02 UTC (2+ messages)
` Applied "regulator: bd71837: Devicetree bindings for BD71837 regulators" to the regulator tree
[PATCH v3 0/5] Reintroduce i.MX EPIT Timer
2018-05-30 9:53 UTC (11+ messages)
` [PATCH v3 1/5] ARM: imx: remove inexistant EPIT timer init
` [PATCH v3 2/5] clk: imx6: add EPIT clock support
` [PATCH v3 3/5] Documentation: DT: add i.MX EPIT timer binding
` [PATCH v3 4/5] clocksource: add driver for i.MX EPIT timer
` [PATCH v3 5/5] ARM: dts: imx6qdl: add missing compatible and clock properties for EPIT
[PATCH v2 4/6] clk: tegra20: init NDFLASH clock to sensible rate
2018-05-30 7:42 UTC (8+ messages)
[PATCH v2 0/5] Reintroduce i.MX EPIT Timer
2018-05-29 16:38 UTC (13+ messages)
` [PATCH v2 1/5] ARM: imx: remove inexistant EPIT timer init
` [PATCH v2 2/5] ARM: clk-imx6q: add EPIT clock support
` [PATCH v2 3/5] Documentation: DT: add i.MX EPIT timer binding
` [PATCH v2 4/5] clocksource: add driver for i.MX EPIT timer
` [PATCH v2 5/5] ARM: dts: imx6qdl: add missing compatible and clock properties for EPIT
[PATCH v4 5/7] ASoC: atmel-i2s: add driver for the new Atmel I2S controller
2018-05-29 14:59 UTC (2+ messages)
` Applied "ASoC: atmel-i2s: add driver for the new Atmel I2S controller" to the asoc tree
[PATCH v4 4/7] ASoC: atmel-i2s: dt-bindings: add DT bindings for I2S controller
2018-05-29 14:59 UTC (2+ messages)
` Applied "ASoC: atmel-i2s: dt-bindings: add DT bindings for I2S controller" to the asoc tree
[PATCH 0/5] Reintroduce i.MX EPIT Timer
2018-05-29 14:25 UTC (8+ messages)
` [PATCH 1/5] ARM: imx: remove inexistant EPIT timer init
` [PATCH 2/5] ARM: clk-imx6q: add EPIT clock support
` [PATCH 3/5] Documentation: DT: add i.MX EPIT timer binding
` [PATCH 4/5] clocksource: add driver for i.MX EPIT timer
` [PATCH 5/5] ARM: dts: imx6qdl: add missing compatible and clock properties for EPIT
[PATCH v3 0/6] mfd/regulator/clk: bd71837: ROHM BD71837 PMIC driver
2018-05-29 12:00 UTC (9+ messages)
` [PATCH v3 1/6] mfd: bd71837: mfd driver for ROHM BD71837 PMIC
` [PATCH v3 2/6] mfd: bd71837: Devicetree bindings "
` [PATCH v3 3/6] regulator: bd71837: Devicetree bindings for BD71837 regulators
` [PATCH v3 4/6] clk: bd71837: Devicetree bindings for ROHM BD71837 PMIC
` [PATCH v3 5/6] clk: bd71837: Add driver for BD71837 PMIC clock
` [PATCH v3 6/6] regulator: bd71837: BD71837 PMIC regulator driver
[PATCH v2] clk: qcom: Enable clocks which needs to be always on for SDM845
2018-05-29 6:07 UTC
[PATCH v2 3/6] mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver
2018-05-28 16:57 UTC (7+ messages)
[RESEND PATCH 0/5] mtd: rawnand: add NVIDIA Tegra NAND flash support
2018-05-28 12:39 UTC (4+ messages)
` [RESEND PATCH 2/5] mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver
[PATCH v2 6/6] regulator: bd71837: BD71837 PMIC regulator driver
2018-05-28 9:01 UTC
[PATCH v2 5/6] clk: bd71837: Add driver for BD71837 PMIC clock
2018-05-28 9:01 UTC
[PATCH v2 4/6] clk: bd71837: Devicetree bindings for ROHM BD71837 PMIC
2018-05-28 9:01 UTC
[PATCH v2 2/6] mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
2018-05-28 9:00 UTC
[PATCH v2 1/6] mfd: bd71837: mfd driver for ROHM BD71837 PMIC
2018-05-28 9:00 UTC
[PATCH] clk: qcom: Enable clocks which needs to be always on for SDM845
2018-05-28 8:52 UTC
[PATCH v2 6/6] ARM: tegra: enable NAND flash on Colibri T20
2018-05-27 21:54 UTC
[PATCH v2 5/6] ARM: tegra: add Tegra20 NAND flash controller node
2018-05-27 21:54 UTC
[PATCH v2 1/6] mtd: rawnand: add Reed-Solomon error correction algorithm
2018-05-27 21:54 UTC
[PATCH v2 0/6] mtd: rawnand: add NVIDIA Tegra NAND flash support
2018-05-27 21:54 UTC
[PATCH 7/9] clk: bd71837: Build ROHM BD71837 PMIC clock driver
2018-05-27 8:28 UTC (3+ messages)
` [PATCH] clk: bd71837: fix platform_no_drv_owner.cocci warnings
[PATCH 9/9] regulator: bd71837: Build BD71837 regulator driver
2018-05-27 2:27 UTC (3+ messages)
` [RFC PATCH] regulator: bd71837: buck_7_volts[] can be static
[PATCH v6 00/11] drivers: Introduce firmware dnd clock river for ZynqMP core
2018-05-25 19:23 UTC (6+ messages)
` [PATCH v6 09/11] firmware: xilinx: Add debugfs for clock control APIs
[PATCH v2 0/3] clk: qcom: msm8996: handle mmagic gdscs and clocks
2018-05-25 18:23 UTC (9+ messages)
` [PATCH v2 1/3] clk: qcom: gdsc: Add support for ALWAYS_ON gdscs
` [PATCH v2 2/3] clk: qcom: Register the gdscs before the clocks
` [PATCH v2 3/3] clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled
[PATCH v11 00/27] ARM: davinci: convert to common clock framework
2018-05-25 18:21 UTC (3+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).