Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
[GIT PULL] clk: ti: changes for 5.5 (take 2)
 2019-11-05  7:20 UTC  - mbox.gz / Atom

[PATCH v3 0/6] Initialise thermal framework and cpufreq earlier during boot
 2019-11-05  6:50 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH v3 5/6] clk: qcom: Initialise clock drivers earlier

[PATCH] clk: qcom: mmcc8974: add frequency table for gfx3d
 2019-11-05  2:50 UTC  (3+ messages) - mbox.gz / Atom

[PATCH v2 0/5] provide the XTAL clock via OF on Meson8/8b/8m2
 2019-11-04 22:31 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH v2 3/5] clk: meson: meson8b: change references to the XTAL clock to use the name

[PATCH v3 0/6] PM / devfreq: Add dynamic scaling for imx ddr controller
 2019-11-04 22:21 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH v3 1/6] clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocks
` [PATCH v3 2/6] clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHE
` [PATCH v3 3/6] dt-bindings: devfreq: Add bindings for imx ddr controller
` [PATCH v3 4/6] PM / devfreq: Add dynamic scaling "
` [PATCH v3 5/6] PM / devfreq: imx-ddrc: Measure bandwidth with perf
` [PATCH v3 6/6] arm64: dts: imx8m: Add ddr controller nodes

[Patch v2 00/10] ARM: dts: dra7: add cal nodes
 2019-11-04 20:48 UTC  (11+ messages) - mbox.gz / Atom
` [Patch v2 01/10] clk: ti: dra7: add cam clkctrl data
` [Patch v2 02/10] ARM: dts: dra7: add cam clkctrl node
` [Patch v2 03/10] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
` [Patch v2 04/10] ARM: dts: dra7-l4: Add ti-sysc node for CAM
` [Patch v2 05/10] ARM: dts: DRA72: Add CAL dtsi node
` [Patch v2 06/10] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
` [Patch v2 07/10] arm: dtsi: dra76x: Add CAL dtsi node
` [Patch v2 08/10] arm: dts: dra76-evm: Add CAL and OV5640 nodes
` [Patch v2 09/10] arm64: dts: k3-am65-main Add CAL node
` [Patch v2 10/10] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera

[Patch v2 0/5] ARM: dts: dra7: add vpe nodes
 2019-11-04 20:38 UTC  (6+ messages) - mbox.gz / Atom
` [Patch v2 1/5] dt-bindings: media: ti-vpe: Document VPE driver
` [Patch v2 2/5] clk: ti: dra7: add vpe clkctrl data
` [Patch v2 3/5] ARM: dts: dra7: add vpe clkctrl node
` [Patch v2 4/5] ARM: dts: dra7: Add ti-sysc node for VPE
` [Patch v2 5/5] media: ti-vpe: vpe: fix compatible to match bindings

[RFC PATCH v2 00/13] Support ROHM BD71828 PMIC
 2019-11-04 19:28 UTC  (12+ messages) - mbox.gz / Atom
` [RFC PATCH v2 02/13] dt-bindings: mfd: Document ROHM BD71828 bindings

[PATCH v5 0/3] MSM8998 GPUCC Support
 2019-11-04 18:04 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH v5 1/3] clk: qcom: Allow constant ratio freq tables for rcg
` [PATCH v5 2/3] clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver
` [PATCH v5 3/3] arm64: dts: qcom: msm8998: Add gpucc node

[GIT PULL] clk/samsung fixes for v5.4
 2019-11-04 18:00 UTC  (3+ messages) - mbox.gz / Atom
    ` [GIT PULL] clk/samsung updates for v5.5

[GIT PULL] Allwinner Clock Fixes for 5.4
 2019-11-04 17:58 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
 2019-11-04 17:57 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2] clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
 2019-11-04 17:56 UTC  (2+ messages) - mbox.gz / Atom

[RFC PATCH v3 00/15] Support ROHM BD71828 PMIC
 2019-11-04 15:48 UTC  (22+ messages) - mbox.gz / Atom
` [RFC PATCH v3 01/15] mfd: bd71828: Support ROHM BD71828 PMIC - core
` [RFC PATCH v3 02/15] dt-bindings: mfd: Document ROHM BD71828 bindings
` [RFC PATCH v3 03/15] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
` [RFC PATCH v3 04/15] dt-bindings: leds: ROHM BD71282 PMIC LED driver
` [RFC PATCH v3 05/15] mfd: input: bd71828: Add power-key support
` [RFC PATCH v3 06/15] clk: bd718x7: Support ROHM BD71828 clk block
` [RFC PATCH v3 07/15] clk: bd718x7: simplify header dependencies
` [RFC PATCH v3 08/15] regulator: bd718x7: Split driver to common and bd718x7 specific parts
` [RFC PATCH v3 09/15] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators
` [RFC PATCH v3 10/15] regulator: bd71828: Add GPIO based run-level control for regulators
` [RFC PATCH v3 11/15] regulator: bd71828: enhanced run-level support
` [RFC PATCH v3 12/15] regulator: bd71828: Support in-kernel APIs to change run-level
` [RFC PATCH v3 13/15] rtc: bd70528 add BD71828 support
` [RFC PATCH v3 14/15] gpio: Add definition for GPIO direction
` [RFC PATCH v3 15/15] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs

[PATCH v5 00/12] arm/arm64: mediatek: Fix mmsys device probing
 2019-11-04 11:14 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH v5 03/12] clk: mediatek: mt8173: switch mmsys to platform "

[GIT PULL] i.MX clock changes for 5.5
 2019-11-04 11:08 UTC  - mbox.gz / Atom

[PATCH 1/2] clk: imx: clk-divider-gate: typo fix
 2019-11-04 10:11 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH 2/2] clk: imx: clk-divider-gate: drop redundant initialization

[PATCH v2 0/3] add Amlogic A1 clock controller driver
 2019-11-04  8:24 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH v2 3/3] clk: meson: a1: add support for Amlogic A1 clock driver

[PATCH] clk: imx: imx8mn: add IMX8MN_CLK_SAI7_IPG clk
 2019-11-04  8:21 UTC  (2+ messages) - mbox.gz / Atom

[PATCH V2 0/4] clk: imx: imx8m[x]: switch to clk_hw API
 2019-11-04  5:46 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH V2 1/4] clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API
` [PATCH V2 2/4] clk: imx: imx8mn: Switch to clk_hw based API
` [PATCH V2 3/4] clk: imx: imx8mm: "
` [PATCH V2 4/4] clk: imx: imx8mq: "

[PATCH 0/3] clk: imx: imx8m[x]: switch to clk_hw API
 2019-11-04  3:09 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH 1/3] clk: imx: imx8mn: Switch to clk_hw based API
` [PATCH 2/3] clk: imx: imx8mm: "
` [PATCH 3/3] clk: imx: imx8mq: "

[PATCH V2] clk: imx: imx8mq: fix sys3_pll_out_sels
 2019-11-04  1:11 UTC  (2+ messages) - mbox.gz / Atom

clk: X1000: Add support for the X1000
 2019-11-02 21:27 UTC  (4+ messages) - mbox.gz / Atom
` clk: X1000: Add support for the X1000 v2
  ` [PATCH 2/2 v2] clk: Ingenic: Add CGU driver for X1000

[PATCH v9 00/22] SC7 entry and exit support for Tegra210
 2019-11-02 14:42 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH v9 12/22] cpufreq: tegra124: Add suspend and resume support

[GIT PULL 1/2] clk: Changes for v5.5-rc1
 2019-11-02 14:37 UTC  (2+ messages) - mbox.gz / Atom
` [GIT PULL 2/2] clk: tegra: "

[PATCH] clk: ti: add clkctrl data dra7 sgx
 2019-11-01 16:27 UTC  - mbox.gz / Atom

[GIT PULL] clk: renesas: Updates for v5.5 (take two)
 2019-11-01 15:59 UTC  - mbox.gz / Atom

[PATCH] clk: imx: clk-composite-8m: add lock to gate/mux
 2019-11-01 10:42 UTC  (2+ messages) - mbox.gz / Atom

[PATCH -next] clk: tegra: Fix build error without CONFIG_PM_SLEEP
 2019-11-01  9:50 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v3 0/4] clk: renesas: rcar-usb2-clock-sel: Fix clks/resets handling
 2019-11-01  7:03 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH v3 1/4] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties
` [PATCH v3 2/4] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add power-domains and resets properties
` [PATCH v3 3/4] clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management
` [PATCH v3 4/4] clk: renesas: rcar-usb2-clock-sel: Add reset_control

[PATCH v2 0/2] clk: ast2600: Expose RMII RCLK for MACs 1-4
 2019-11-01  4:50 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH v2 1/2] dt-bindings: clock: Add AST2600 RMII RCLK gate definitions

[PATCH 0/2] clk: imx: imx7d: move setting clk parent to dts
 2019-11-01  1:28 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH 1/2] arm: dts: imx7s: ccm: add assigned-clocks
` [PATCH 2/2] clk: imx: imx7d: remove clk_set_parent

[PATCH v4 0/5] Add Global Clock controller (GCC) driver for SC7180
 2019-10-31 17:41 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH v4 5/5] clk: qcom: "

[PATCH v3 00/10] NVIDIA Tegra20 CPUFreq driver major update
 2019-10-31 17:07 UTC  (12+ messages) - mbox.gz / Atom
` [PATCH v3 01/10] clk: tegra: Add custom CCLK implementation
` [PATCH v3 02/10] clk: tegra: pll: Add pre/post rate-change hooks
` [PATCH v3 03/10] clk: tegra: cclk: Add helpers for handling PLLX rate changes
` [PATCH v3 04/10] clk: tegra20: Use custom CCLK implementation
` [PATCH v3 05/10] clk: tegra30: "
` [PATCH v3 06/10] dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30
` [PATCH v3 07/10] cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)
` [PATCH v3 08/10] ARM: tegra: Create tegra20-cpufreq platform device on Tegra30
` [PATCH v3 09/10] ARM: dts: tegra30: beaver: Set up voltage regulators for DVFS
` [PATCH v3 10/10] ARM: dts: tegra30: beaver: Add CPU Operating Performance Points

[GIT PULL] clk: ti: fixes for v5.4
 2019-10-31 13:58 UTC  (2+ messages) - mbox.gz / Atom

[GIT PULL] clk: ti: changes for 5.5
 2019-10-31 13:57 UTC  (2+ messages) - mbox.gz / Atom

[PATCHv3 00/10] clk: ti: remoteproc / iommu support patches
 2019-10-31 13:54 UTC  (5+ messages) - mbox.gz / Atom
` [PATCHv3 03/10] clk: ti: clkctrl: add new exported API for checking standby info
    ` [PATCHv4 03/12] "

[PATCH v1 0/7] Add GPU & Video Clock controller driver for SC7180
 2019-10-31 12:21 UTC  (8+ messages) - mbox.gz / Atom
` [PATCH v1 1/7] clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration
` [PATCH v1 2/7] dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings
` [PATCH v1 3/7] dt-bindings: clock: Introduce QCOM Graphics "
` [PATCH v1 4/7] clk: qcom: Add graphics clock controller driver for SC7180
` [PATCH v1 5/7] dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings
` [PATCH v1 6/7] dt-bindings: clock: Introduce QCOM Video "
` [PATCH v1 7/7] clk: qcom: Add video clock controller driver for SC7180

[PATCH 0/2] RPM clocks for MSM8976/56
 2019-10-31 11:29 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH 1/2] clk: qcom: smd: Add support for MSM8976 rpm clocks
` [PATCH 2/2] dt-bindings: clock: rpmcc: Document msm8976 compatible

[PATCH v5 0/6] Initialise thermal framework and cpufreq earlier during boot
 2019-10-31  6:00 UTC  (4+ messages) - mbox.gz / Atom

[PATCH v2 1/2] clk: tegra20/30: Don't pre-initialize displays parent clock
 2019-10-30 21:58 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH v2 2/2] clk: tegra20/30: Explicitly set parent clock for Video Decoder

[PATCH v1 1/2] ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30/114/124
 2019-10-30 21:53 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH v1 2/2] ARM: tegra: Don't enable PLLX while resuming from LP1 on Tegra30

[PATCH v1] ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30/114/124
 2019-10-30 21:50 UTC  - mbox.gz / Atom

[PATCH v1] clk: tegra20/30: Don't pre-initialize displays parent clock
 2019-10-30 21:49 UTC  - mbox.gz / Atom

[PATCH v2 00/17] NVIDIA Tegra20 CPUFreq driver major update
 2019-10-30 21:05 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH v2 06/17] dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30

[PATCH 00/46] ARM: pxa: towards multiplatform support
 2019-10-30 21:00 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH 36/46] ARM: pxa: move smemc register access from clk to platform
` [PATCH 37/46] ARM: pxa: move clk register definitions to driver

[PATCH v3 1/2] dt-bindings: power: Convert Generic Power Domain bindings to json-schema
 2019-10-30 17:32 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH v3 2/2] dt-bindings: power: Convert Samsung Exynos "

[PATCH v2 0/4] clk: renesas: rcar-usb2-clock-sel: Fix clks/resets handling
 2019-10-30 14:34 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH v2 1/4] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties
` [PATCH v2 2/4] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add power-domains and resets properties

[PATCH] clk: mark clk_disable_unused() as __init
 2019-10-30 14:24 UTC  (4+ messages) - mbox.gz / Atom

[PATCH 0/7] clk: imx: switch to clk_hw based API
 2019-10-30 10:21 UTC  (9+ messages) - mbox.gz / Atom
` [PATCH 1/7] clk: imx: clk-pll14xx: Switch "
` [PATCH 2/7] clk: imx: clk-composite-8m: "
` [PATCH 3/7] clk: imx: add imx_unregister_hw_clocks
` [PATCH 4/7] clk: imx: add hw API imx_clk_hw_mux2_flags
` [PATCH 5/7] clk: imx: frac-pll: Switch to clk_hw based API
` [PATCH 6/7] clk: imx: sccg-pll: "
` [PATCH 7/7] clk: imx: gate3: "

[PATCH] clk: imx: imx8mq: fix sys2/3_pll_out_sels
 2019-10-30  9:33 UTC  (3+ messages) - mbox.gz / Atom

[PATCH v2] clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation
 2019-10-30  0:48 UTC  - mbox.gz / Atom

[PATCH 0/5] Add clocks for Unisoc's SC9863A
 2019-10-29 22:03 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH 2/5] dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific
` [PATCH 3/5] dt-bindings: clk: sprd: add bindings for sc9863a clock controller
` [PATCH 4/5] clk: sprd: Add dt-bindings include file for SC9863A

[PATCH v2 0/3] Add support for RPMHCC for SC7180
 2019-10-29 17:48 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH v2 1/3] dt-bindings: clock: Add YAML schemas for the QCOM RPMHCC clock bindings
` [PATCH v2 2/3] dt-bindings: clock: Introduce RPMHCC bindings for SC7180
` [PATCH v2 3/3] clk: qcom: clk-rpmh: Add support for RPMHCC "

[PATCH v1 0/3] Add support for RPMHCC for SC7180
 2019-10-29 17:48 UTC  (6+ messages) - mbox.gz / Atom
` [PATCH v1 1/3] dt-bindings: clock: Add YAML schemas for the QCOM RPMHCC clock bindings
` [PATCH v1 2/3] dt-bindings: clock: Introduce RPMHCC bindings for SC7180

[GIT PULL]: Amlogic clock updates for v5.5
 2019-10-29 14:13 UTC  - mbox.gz / Atom

[PATCH] clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path
 2019-10-29 14:12 UTC  (2+ messages) - mbox.gz / Atom

[RFC PATCH 00/13] Support ROHM BD71828 PMIC
 2019-10-29 14:08 UTC  (23+ messages) - mbox.gz / Atom
` [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
` [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC

[PATCH v10 00/15] memory: tegra: Introduce Tegra30 EMC driver
 2019-10-29 13:51 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2 1/2] clk: tegra: divider: Add missing check for enable-bit on rate's recalculation
 2019-10-29 13:20 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH v2 2/2] clk: tegra: divider: Support enable-bit for Super clocks

[PATCH v1] clk: tegra20/30: Optimize PLLX configuration restoring
 2019-10-29 13:17 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] clk: samsung: exynos5433: Add missing slab.h header for kfree()
 2019-10-29 11:37 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] clk: Fix memory leak in clk_unregister()
 2019-10-29 11:08 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH v2] "

[PATCH] clk: samsung: exynos5420: add VPLL rate table
 2019-10-29 10:37 UTC  - mbox.gz / Atom

[PATCH] clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume
 2019-10-29 10:36 UTC  - mbox.gz / Atom

[PATCH v6 6/7] clk: Add common clock driver for BM1880 SoC
 2019-10-29  9:01 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18
 2019-10-29  7:43 UTC  (2+ messages) - mbox.gz / Atom

page:   latest

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git