Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Peng Fan <peng.fan@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: "sboyd@kernel.org" <sboyd@kernel.org>,
	"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
	"festevam@gmail.com" <festevam@gmail.com>,
	Abel Vesa <abel.vesa@nxp.com>,
	Leonard Crestez <leonard.crestez@nxp.com>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	dl-linux-imx <linux-imx@nxp.com>,
	Aisheng Dong <aisheng.dong@nxp.com>,
	"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Anson Huang <anson.huang@nxp.com>, Jacky Bai <ping.bai@nxp.com>,
	"l.stach@pengutronix.de" <l.stach@pengutronix.de>
Subject: RE: [PATCH V2 1/4] clk: imx: imx8mq: fix a53 cpu clock
Date: Wed, 12 Feb 2020 13:47:38 +0000
Message-ID: <AM0PR04MB4481C9B71B5860BACA47CB1B881B0@AM0PR04MB4481.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20200212134310.GG11096@dragon>

Hi Shawn,

> Subject: Re: [PATCH V2 1/4] clk: imx: imx8mq: fix a53 cpu clock
> 
> On Tue, Jan 14, 2020 at 07:27:15AM +0000, Peng Fan wrote:
> > From: Peng Fan <peng.fan@nxp.com>
> 
> The 'imx: ' in subject is not really needed.  'clk: imx8mq: ' should be already
> clear enough.
> 
> >
> > The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
> > signoff timing is 1Ghz,
> 
> Is this restriction mentioned in any document?

This information was not mentioned in documentation. But I have confirmed
the limitation with design team.

> 
> > however the A53 core which sources from CCM root could run above 1GHz
> > which voilates the CCM.
> 
> s/voilates/violates

Fix in v3.

> 
> >
> > There is a CORE_SEL slice before A53 core, we need configure the
> 
> s/need/need to

Fix in v3.

> 
> > CORE_SEL slice source from ARM PLL, not A53 CCM clk root.
> >
> > The A53 CCM clk root should only be used when need to change ARM PLL
> > frequency.
> >
> > Add arm_a53_core clk that could source from arm_a53_div and
> arm_pll_out.
> > Configure a53 ccm root sources from 800MHz sys pll Configure a53 core
> > sources from arm_pll_out Mark arm_a53_core as critical clock
> >
> > Fixes: db27e40b27f1 ("clk: imx8mq: Add the missing ARM clock")
> 
> We have been running this for quite a while with OPPs above 1GHz.  Why
> didn't we hear any issue report?

In room temperature, there might be no issue. But the A53 clk root
signoff timing is 1Ghz, so if we keep using the clk root for OPPs above
1GHz, we could not make sure there is no problem.

Thanks,
Peng.

> 
> Shawn
> 
> > Reviewed-by: Jacky Bai <ping.bai@nxp.com>
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > ---
> >
> > V2:
> >  None
> >
> >  drivers/clk/imx/clk-imx8mq.c             | 16 ++++++++++++----
> >  include/dt-bindings/clock/imx8mq-clock.h |  4 +++-
> >  2 files changed, 15 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/clk/imx/clk-imx8mq.c
> > b/drivers/clk/imx/clk-imx8mq.c index b031183ff427..82a16b8e98a9
> 100644
> > --- a/drivers/clk/imx/clk-imx8mq.c
> > +++ b/drivers/clk/imx/clk-imx8mq.c
> > @@ -41,6 +41,8 @@ static const char * const video2_pll_out_sels[] =
> > {"video2_pll1_ref_sel", };  static const char * const imx8mq_a53_sels[] =
> {"osc_25m", "arm_pll_out", "sys2_pll_500m", "sys2_pll_1000m",
> >  					"sys1_pll_800m", "sys1_pll_400m", "audio_pll1_out",
> > "sys3_pll_out", };
> >
> > +static const char * const imx8mq_a53_core_sels[] = {"arm_a53_div",
> > +"arm_pll_out", };
> > +
> >  static const char * const imx8mq_arm_m4_sels[] = {"osc_25m",
> "sys2_pll_200m", "sys2_pll_250m", "sys1_pll_266m",
> >  					"sys1_pll_800m", "audio_pll1_out", "video_pll1_out",
> > "sys3_pll_out", };
> >
> > @@ -411,6 +413,9 @@ static int imx8mq_clocks_probe(struct
> platform_device *pdev)
> >  	hws[IMX8MQ_CLK_GPU_CORE_DIV] =
> imx8m_clk_hw_composite_core("gpu_core_div", imx8mq_gpu_core_sels,
> base + 0x8180);
> >  	hws[IMX8MQ_CLK_GPU_SHADER_DIV] =
> > imx8m_clk_hw_composite("gpu_shader_div", imx8mq_gpu_shader_sels,
> base
> > + 0x8200);
> >
> > +	/* CORE SEL */
> > +	hws[IMX8MQ_CLK_A53_CORE] =
> imx_clk_hw_mux2_flags("arm_a53_core",
> > +base + 0x9880, 24, 1, imx8mq_a53_core_sels,
> > +ARRAY_SIZE(imx8mq_a53_core_sels), CLK_IS_CRITICAL);
> > +
> >  	/* BUS */
> >  	hws[IMX8MQ_CLK_MAIN_AXI] =
> imx8m_clk_hw_composite_critical("main_axi", imx8mq_main_axi_sels, base
> + 0x8800);
> >  	hws[IMX8MQ_CLK_ENET_AXI] = imx8m_clk_hw_composite("enet_axi",
> > imx8mq_enet_axi_sels, base + 0x8880); @@ -574,11 +579,14 @@ static int
> imx8mq_clocks_probe(struct platform_device *pdev)
> >  	hws[IMX8MQ_GPT_3M_CLK] = imx_clk_hw_fixed_factor("gpt_3m",
> "osc_25m", 1, 8);
> >  	hws[IMX8MQ_CLK_DRAM_ALT_ROOT] =
> > imx_clk_hw_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
> >
> > -	hws[IMX8MQ_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_div",
> > -					   hws[IMX8MQ_CLK_A53_DIV]->clk,
> > -					   hws[IMX8MQ_CLK_A53_SRC]->clk,
> > +	clk_hw_set_parent(hws[IMX8MQ_CLK_A53_SRC],
> hws[IMX8MQ_SYS1_PLL_800M]);
> > +	clk_hw_set_parent(hws[IMX8MQ_CLK_A53_CORE],
> > +hws[IMX8MQ_ARM_PLL_OUT]);
> > +
> > +	hws[IMX8MQ_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
> > +					   hws[IMX8MQ_CLK_A53_CORE]->clk,
> > +					   hws[IMX8MQ_CLK_A53_CORE]->clk,
> >  					   hws[IMX8MQ_ARM_PLL_OUT]->clk,
> > -					   hws[IMX8MQ_SYS1_PLL_800M]->clk);
> > +					   hws[IMX8MQ_CLK_A53_DIV]->clk);
> >
> >  	imx_check_clk_hws(hws, IMX8MQ_CLK_END);
> >
> > diff --git a/include/dt-bindings/clock/imx8mq-clock.h
> > b/include/dt-bindings/clock/imx8mq-clock.h
> > index 3bab9b21c8d7..ac71e9e502b8 100644
> > --- a/include/dt-bindings/clock/imx8mq-clock.h
> > +++ b/include/dt-bindings/clock/imx8mq-clock.h
> > @@ -424,6 +424,8 @@
> >  #define IMX8MQ_SYS2_PLL_500M_CG			283
> >  #define IMX8MQ_SYS2_PLL_1000M_CG		284
> >
> > -#define IMX8MQ_CLK_END				285
> > +#define IMX8MQ_CLK_A53_CORE			285
> > +
> > +#define IMX8MQ_CLK_END				286
> >
> >  #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */
> > --
> > 2.16.4
> >

  reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-14  7:27 [PATCH V2 0/4] clk: imx: imx8m: " Peng Fan
2020-01-14  7:27 ` [PATCH V2 1/4] clk: imx: imx8mq: " Peng Fan
2020-02-12 13:43   ` Shawn Guo
2020-02-12 13:47     ` Peng Fan [this message]
2020-01-14  7:27 ` [PATCH V2 2/4] clk: imx: imx8mm: " Peng Fan
2020-01-14  7:27 ` [PATCH V2 3/4] clk: imx: imx8mn: " Peng Fan
2020-01-14  7:27 ` [PATCH V2 4/4] clk: imx: imx8mp: " Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM0PR04MB4481C9B71B5860BACA47CB1B881B0@AM0PR04MB4481.eurprd04.prod.outlook.com \
    --to=peng.fan@nxp.com \
    --cc=abel.vesa@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=anson.huang@nxp.com \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ping.bai@nxp.com \
    --cc=s.hauer@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git