From: Dong Aisheng <dongas86@gmail.com>
To: Stephen Boyd <sboyd@kernel.org>
Cc: Dong Aisheng <aisheng.dong@nxp.com>,
linux-clk <linux-clk@vger.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>,
Michael Turquette <mturquette@baylibre.com>,
Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <fabio.estevam@nxp.com>,
dl-linux-imx <linux-imx@nxp.com>,
Sascha Hauer <kernel@pengutronix.de>
Subject: Re: [PATCH V4 07/11] clk: imx: scu: add suspend/resume support
Date: Mon, 9 Sep 2019 18:35:15 +0800 [thread overview]
Message-ID: <CAA+hA=Rds2Pvv0iJVhFr3nb0N8iKjTtO=uu8c_gTymiVr-dewA@mail.gmail.com> (raw)
In-Reply-To: <20190906170944.B861620578@mail.kernel.org>
On Sat, Sep 7, 2019 at 5:32 PM Stephen Boyd <sboyd@kernel.org> wrote:
>
> Quoting Dong Aisheng (2019-08-20 04:13:21)
> > Clock state will be lost when its power domain is completely off
> > during system suspend/resume. So we save and restore the state
> > accordingly in suspend/resume callback.
>
> And this doesn't need any coordination with other clks in the clk tree
> right?
AFAIK no as SC firmware may have handled it properly.
>
> > diff --git a/drivers/clk/imx/clk-scu.c b/drivers/clk/imx/clk-scu.c
> > index edc39d7..8d9cfa2 100644
> > --- a/drivers/clk/imx/clk-scu.c
> > +++ b/drivers/clk/imx/clk-scu.c
> > @@ -46,6 +46,10 @@ struct clk_scu {
> > struct clk_hw hw;
> > u16 rsrc_id;
> > u8 clk_type;
> > +
> > + /* for state save&restore */
> > + bool is_enabled;
> > + u32 rate;
> > };
> >
> > /*
> > @@ -425,6 +429,9 @@ struct clk_hw *__imx_clk_scu(struct device *dev, const char *name,
> > hw = ERR_PTR(ret);
> > }
> >
> > + if (dev)
> > + dev_set_drvdata(dev, clk);
> > +
> > return hw;
> > }
> >
> > @@ -481,10 +488,52 @@ static int imx_clk_scu_probe(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +int __maybe_unused imx_clk_scu_suspend(struct device *dev)
>
> static?
>
> > +{
> > + struct clk_scu *clk = dev_get_drvdata(dev);
> > +
> > + clk->rate = clk_hw_get_rate(&clk->hw);
> > + clk->is_enabled = clk_hw_is_enabled(&clk->hw);
> > +
> > + if (clk->rate)
> > + dev_dbg(dev, "save rate %d\n", clk->rate);
> > +
> > + if (clk->is_enabled)
> > + dev_dbg(dev, "save enabled state\n");
> > +
> > + return 0;
> > +}
> > +
> > +int __maybe_unused imx_clk_scu_resume(struct device *dev)
>
> static?
>
> > +{
> > + struct clk_scu *clk = dev_get_drvdata(dev);
> > + int ret = 0;
> > +
> > + if (clk->rate) {
> > + ret = clk_scu_set_rate(&clk->hw, clk->rate, 0);
> > + dev_dbg(dev, "restore rate %d %s\n", clk->rate,
> > + !ret ? "success" : "failed");
> > + }
> > +
> > + if (clk->is_enabled) {
> > + ret = clk_scu_prepare(&clk->hw);
> > + dev_dbg(dev, "restore enabled state %s\n",
> > + !ret ? "success" : "failed");
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +const struct dev_pm_ops imx_clk_scu_pm_ops = {
>
> static?
>
Sorry that i missed to update here as those function are changed to be
used within
this file now.
Will fix.
Regards
Aisheng
> > + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx_clk_scu_suspend,
> > + imx_clk_scu_resume)
> > +};
> > +
next prev parent reply other threads:[~2019-09-09 10:45 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-20 11:13 [PATCH V4 00/11] clk: imx8: add new clock binding for better pm support Dong Aisheng
2019-08-20 11:13 ` [PATCH V4 01/11] dt-bindings: firmware: imx-scu: new binding to parse clocks from device tree Dong Aisheng
2019-08-24 19:19 ` Shawn Guo
2019-08-26 3:24 ` Aisheng Dong
2019-08-27 17:04 ` Rob Herring
2019-09-06 16:56 ` Stephen Boyd
2019-08-20 11:13 ` [PATCH V4 02/11] dt-bindings: clock: imx-lpcg: add support " Dong Aisheng
2019-08-24 19:21 ` Shawn Guo
2019-08-26 3:14 ` Aisheng Dong
2019-08-26 3:21 ` Aisheng Dong
2019-08-27 17:05 ` Rob Herring
2019-09-06 17:00 ` Stephen Boyd
2019-08-20 11:13 ` [PATCH V4 03/11] clk: imx: scu: add two cells binding support Dong Aisheng
2019-09-06 17:06 ` Stephen Boyd
2019-09-09 10:23 ` Dong Aisheng
2019-09-16 18:44 ` Stephen Boyd
2019-11-17 12:07 ` Dong Aisheng
2019-08-20 11:13 ` [PATCH V4 04/11] clk: imx: scu: bypass cpu power domains Dong Aisheng
2019-09-06 17:07 ` Stephen Boyd
2019-09-09 10:24 ` Dong Aisheng
2019-08-20 11:13 ` [PATCH V4 05/11] clk: imx: scu: allow scu clk to take device pointer Dong Aisheng
2019-08-20 11:13 ` [PATCH V4 06/11] clk: imx: scu: add runtime pm support Dong Aisheng
2019-08-20 11:13 ` [PATCH V4 07/11] clk: imx: scu: add suspend/resume support Dong Aisheng
2019-09-06 17:09 ` Stephen Boyd
2019-09-09 10:35 ` Dong Aisheng [this message]
2019-08-20 11:13 ` [PATCH V4 08/11] clk: imx: imx8qxp-lpcg: add parsing clocks from device tree Dong Aisheng
2019-09-06 17:13 ` Stephen Boyd
2019-09-09 11:23 ` Dong Aisheng
2019-09-16 18:45 ` Stephen Boyd
2019-11-17 12:08 ` Dong Aisheng
2019-08-20 11:13 ` [PATCH V4 09/11] clk: imx: lpcg: allow lpcg clk to take device pointer Dong Aisheng
2019-08-20 11:13 ` [PATCH V4 10/11] clk: imx: clk-imx8qxp-lpcg: add runtime pm support Dong Aisheng
2019-08-20 11:13 ` [PATCH V4 11/11] clk: imx: lpcg: add suspend/resume support Dong Aisheng
2019-09-06 17:14 ` Stephen Boyd
2019-09-09 11:39 ` Dong Aisheng
2019-09-09 12:21 ` [PATCH V4 00/11] clk: imx8: add new clock binding for better pm support Oliver Graute
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAA+hA=Rds2Pvv0iJVhFr3nb0N8iKjTtO=uu8c_gTymiVr-dewA@mail.gmail.com' \
--to=dongas86@gmail.com \
--cc=aisheng.dong@nxp.com \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).