linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
To: Taniya Das <tdas@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Marc Gonzalez <marc.w.gonzalez@free.fr>,
	MSM <linux-arm-msm@vger.kernel.org>,
	linux-clk@vger.kernel.org, lkml <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 1/2] clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver
Date: Fri, 18 Oct 2019 08:24:00 -0600	[thread overview]
Message-ID: <CAOCk7NraMpxpu5opK0JrFzY1UkMFi=U+Npq8jJWbRo15q8z4jA@mail.gmail.com> (raw)
In-Reply-To: <353b0e3f-80fc-6950-004b-e34e4ebb62b4@codeaurora.org>

On Thu, Oct 17, 2019 at 10:11 PM Taniya Das <tdas@codeaurora.org> wrote:
>
> Hi Jeffrey,
>
> On 10/2/2019 6:46 AM, Jeffrey Hugo wrote:
> > The GPUCC manages the clocks for the Adreno GPU found on MSM8998.
> >
> > Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
> > ---
> >   drivers/clk/qcom/Kconfig         |   9 +
> >   drivers/clk/qcom/Makefile        |   1 +
> >   drivers/clk/qcom/gpucc-msm8998.c | 346 +++++++++++++++++++++++++++++++
> >   3 files changed, 356 insertions(+)
> >   create mode 100644 drivers/clk/qcom/gpucc-msm8998.c
> >
> > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> > index 96efee18fa6c..31a70168327c 100644
> > --- a/drivers/clk/qcom/Kconfig
> > +++ b/drivers/clk/qcom/Kconfig
> > @@ -230,6 +230,15 @@ config MSM_MMCC_8998
> >         Say Y if you want to support multimedia devices such as display,
> >         graphics, video encode/decode, camera, etc.
> >
> > +config MSM_GPUCC_8998
> > +     tristate "MSM8998 Graphics Clock Controller"
> > +     select MSM_GCC_8998
> > +     select QCOM_GDSC
> > +     help
> > +       Support for the graphics clock controller on MSM8998 devices.
> > +       Say Y if you want to support graphics controller devices and
> > +       functionality such as 3D graphics.
> > +
> >   config QCS_GCC_404
> >       tristate "QCS404 Global Clock Controller"
> >       help
> > diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> > index 0ac3c1459313..616b68f91db6 100644
> > --- a/drivers/clk/qcom/Makefile
> > +++ b/drivers/clk/qcom/Makefile
> > @@ -33,6 +33,7 @@ obj-$(CONFIG_MSM_GCC_8994) += gcc-msm8994.o
> >   obj-$(CONFIG_MSM_GCC_8996) += gcc-msm8996.o
> >   obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o
> >   obj-$(CONFIG_MSM_GCC_8998) += gcc-msm8998.o
> > +obj-$(CONFIG_MSM_GPUCC_8998) += gpucc-msm8998.o
> >   obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
> >   obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
> >   obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
> > diff --git a/drivers/clk/qcom/gpucc-msm8998.c b/drivers/clk/qcom/gpucc-msm8998.c
> > new file mode 100644
> > index 000000000000..f0ccb4963885
> > --- /dev/null
> > +++ b/drivers/clk/qcom/gpucc-msm8998.c
> > @@ -0,0 +1,346 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2019, Jeffrey Hugo
> > + */
> > +
>
> Copyright (c) 2019, The Linux Foundation. All rights reserved.

No, what I have is correct.  I'll send you the resources regarding
this issue since its not really relevant to the community.

>
> > +#include <linux/kernel.h>
> > +#include <linux/bitops.h>
> > +#include <linux/err.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/regmap.h>
> > +#include <linux/reset-controller.h>
> > +#include <linux/clk.h>
> > +
> > +#include <dt-bindings/clock/qcom,gpucc-msm8998.h>
> > +
> > +#include "common.h"
> > +#include "clk-regmap.h"
> > +#include "clk-regmap-divider.h"
> > +#include "clk-alpha-pll.h"
> > +#include "clk-rcg.h"
> > +#include "clk-branch.h"
> > +#include "reset.h"
> > +#include "gdsc.h"
> > +
> > +enum {
> > +     P_XO,
> > +     P_GPLL0,
> > +     P_GPUPLL0_OUT_EVEN,
> > +};
> > +
> > +/* Instead of going directly to the block, XO is routed through this branch */
> > +static struct clk_branch gpucc_cxo_clk = {
> > +     .halt_reg = 0x1020,
> > +     .clkr = {
> > +             .enable_reg = 0x1020,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpucc_cxo_clk",
> > +                     .parent_data = &(const struct clk_parent_data){
> > +                             .fw_name = "xo",
> > +                             .name = "xo"
> > +                     },
> > +                     .num_parents = 1,
> > +                     .ops = &clk_branch2_ops,
> > +                     .flags = CLK_IS_CRITICAL,
> > +             },
> > +     },
> > +};
> > +
> > +static const struct clk_div_table post_div_table_fabia_even[] = {
> > +     { 0x0, 1 },
> > +     { 0x1, 2 },
> > +     { 0x3, 4 },
> > +     { 0x7, 8 },
> > +     { }
> > +};
> > +
> > +static struct clk_alpha_pll gpupll0 = {
> > +     .offset = 0x0,
> > +     .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
> > +     .clkr.hw.init = &(struct clk_init_data){
> > +             .name = "gpupll0",
> > +             .parent_hws = (const struct clk_hw *[]){ &gpucc_cxo_clk.clkr.hw },
> > +             .num_parents = 1,
> > +             .ops = &clk_alpha_pll_fixed_fabia_ops,
> > +     },
> > +};
> > +
> > +static struct clk_alpha_pll_postdiv gpupll0_out_even = {
> > +     .offset = 0x0,
> > +     .post_div_shift = 8,
> > +     .post_div_table = post_div_table_fabia_even,
> > +     .num_post_div = ARRAY_SIZE(post_div_table_fabia_even),
> > +     .width = 4,
> > +     .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
> > +     .clkr.hw.init = &(struct clk_init_data){
> > +             .name = "gpupll0_out_even",
> > +             .parent_hws = (const struct clk_hw *[]){ &gpupll0.clkr.hw },
> > +             .num_parents = 1,
> > +             .ops = &clk_alpha_pll_postdiv_fabia_ops,
> > +     },
> > +};
> > +
> > +static const struct parent_map gpu_xo_gpll0_map[] = {
> > +     { P_XO, 0 },
> > +     { P_GPLL0, 5 },
> > +};
> > +
> > +static const struct clk_parent_data gpu_xo_gpll0[] = {
> > +     { .hw = &gpucc_cxo_clk.clkr.hw },
> > +     { .fw_name = "gpll0", .name = "gpll0" },
> > +};
> > +
> > +static const struct parent_map gpu_xo_gpupll0_map[] = {
> > +     { P_XO, 0 },
> > +     { P_GPUPLL0_OUT_EVEN, 1 },
> > +};
> > +
> > +static const struct clk_parent_data gpu_xo_gpupll0[] = {
> > +     { .hw = &gpucc_cxo_clk.clkr.hw },
> > +     { .hw = &gpupll0_out_even.clkr.hw },
> > +};
> > +
> > +static const struct freq_tbl ftbl_rbcpr_clk_src[] = {
> > +     F(19200000, P_XO, 1, 0, 0),
> > +     F(50000000, P_GPLL0, 12, 0, 0),
> > +     { }
> > +};
> > +
> > +static struct clk_rcg2 rbcpr_clk_src = {
> > +     .cmd_rcgr = 0x1030,
> > +     .hid_width = 5,
> > +     .parent_map = gpu_xo_gpll0_map,
> > +     .freq_tbl = ftbl_rbcpr_clk_src,
> > +     .clkr.hw.init = &(struct clk_init_data){
> > +             .name = "rbcpr_clk_src",
> > +             .parent_data = gpu_xo_gpll0,
> > +             .num_parents = 2,
> > +             .ops = &clk_rcg2_ops,
> > +     },
> > +};
> > +
> > +static const struct freq_tbl ftbl_gfx3d_clk_src[] = {
> > +     F(180000000, P_GPUPLL0_OUT_EVEN, 2, 0, 0),
> > +     F(257000000, P_GPUPLL0_OUT_EVEN, 2, 0, 0),
> > +     F(342000000, P_GPUPLL0_OUT_EVEN, 2, 0, 0),
> > +     F(414000000, P_GPUPLL0_OUT_EVEN, 2, 0, 0),
> > +     F(515000000, P_GPUPLL0_OUT_EVEN, 2, 0, 0),
> > +     F(596000000, P_GPUPLL0_OUT_EVEN, 2, 0, 0),
> > +     F(670000000, P_GPUPLL0_OUT_EVEN, 2, 0, 0),
> > +     F(710000000, P_GPUPLL0_OUT_EVEN, 2, 0, 0),
> > +     { }
> > +};
> > +
> > +static struct clk_rcg2 gfx3d_clk_src = {
> > +     .cmd_rcgr = 0x1070,
> > +     .hid_width = 5,
> > +     .parent_map = gpu_xo_gpupll0_map,
> > +     .freq_tbl = ftbl_gfx3d_clk_src,
> > +     .clkr.hw.init = &(struct clk_init_data){
> > +             .name = "gfx3d_clk_src",
> > +             .parent_data = gpu_xo_gpupll0,
> > +             .num_parents = 2,
> > +             .ops = &clk_rcg2_ops,
> > +             .flags = CLK_OPS_PARENT_ENABLE,
> > +     },
> > +};
> > +
> > +static const struct freq_tbl ftbl_rbbmtimer_clk_src[] = {
> > +     F(19200000, P_XO, 1, 0, 0),
> > +     { }
> > +};
> > +
> > +static struct clk_rcg2 rbbmtimer_clk_src = {
> > +     .cmd_rcgr = 0x10b0,
> > +     .hid_width = 5,
> > +     .parent_map = gpu_xo_gpll0_map,
> > +     .freq_tbl = ftbl_rbbmtimer_clk_src,
> > +     .clkr.hw.init = &(struct clk_init_data){
> > +             .name = "rbbmtimer_clk_src",
> > +             .parent_data = gpu_xo_gpll0,
> > +             .num_parents = 2,
> > +             .ops = &clk_rcg2_ops,
> > +     },
> > +};
> > +
> > +static const struct freq_tbl ftbl_gfx3d_isense_clk_src[] = {
> > +     F(19200000, P_XO, 1, 0, 0),
> > +     F(40000000, P_GPLL0, 15, 0, 0),
> > +     F(200000000, P_GPLL0, 3, 0, 0),
> > +     F(300000000, P_GPLL0, 2, 0, 0),
> > +     { }
> > +};
> > +
> > +static struct clk_rcg2 gfx3d_isense_clk_src = {
> > +     .cmd_rcgr = 0x1100,
> > +     .hid_width = 5,
> > +     .parent_map = gpu_xo_gpll0_map,
> > +     .freq_tbl = ftbl_gfx3d_isense_clk_src,
> > +     .clkr.hw.init = &(struct clk_init_data){
> > +             .name = "gfx3d_isense_clk_src",
> > +             .parent_data = gpu_xo_gpll0,
> > +             .num_parents = 2,
> > +             .ops = &clk_rcg2_ops,
> > +     },
> > +};
> > +
> > +static struct clk_branch rbcpr_clk = {
> > +     .halt_reg = 0x1054,
> > +     .clkr = {
> > +             .enable_reg = 0x1054,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "rbcpr_clk",
> > +                     .parent_hws = (const struct clk_hw *[]){ &rbcpr_clk_src.clkr.hw },
> > +                     .num_parents = 1,
> > +                     .ops = &clk_branch2_ops,
> > +                     .flags = CLK_SET_RATE_PARENT,
> > +             },
> > +     },
> > +};
> > +
>
> If unused by consumer it would good to drop this clock.

This gets used, hence why I have it listed.

>
> > +static struct clk_branch gfx3d_clk = {
> > +     .halt_reg = 0x1098,
> > +     .clkr = {
> > +             .enable_reg = 0x1098,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gfx3d_clk",
> > +                     .parent_hws = (const struct clk_hw *[]){ &gfx3d_clk_src.clkr.hw },
> > +                     .num_parents = 1,
> > +                     .ops = &clk_branch2_ops,
> > +                     .flags = CLK_SET_RATE_PARENT,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch rbbmtimer_clk = {
> > +     .halt_reg = 0x10d0,
> > +     .clkr = {
> > +             .enable_reg = 0x10d0,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "rbbmtimer_clk",
> > +                     .parent_hws = (const struct clk_hw *[]){ &rbbmtimer_clk_src.clkr.hw },
> > +                     .num_parents = 1,
> > +                     .ops = &clk_branch2_ops,
> > +                     .flags = CLK_SET_RATE_PARENT,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gfx3d_isense_clk = {
> > +     .halt_reg = 0x1124,
> > +     .clkr = {
> > +             .enable_reg = 0x1124,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gfx3d_isense_clk",
> > +                     .parent_hws = (const struct clk_hw *[]){ &gfx3d_isense_clk_src.clkr.hw },
> > +                     .num_parents = 1,
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct gdsc gpu_cx_gdsc = {
> > +     .gdscr = 0x1004,
> > +     .pd = {
> > +             .name = "gpu_cx",
> > +     },
> > +     .pwrsts = PWRSTS_OFF_ON,
> > +};
> > +
> > +static struct gdsc gpu_gx_gdsc = {
> > +     .gdscr = 0x1094,
> > +     .clamp_io_ctrl = 0x130,
> > +     .pd = {
> > +             .name = "gpu_gx",
> > +     },
> > +     .parent = &gpu_cx_gdsc.pd,
> > +     .pwrsts = PWRSTS_OFF_ON,
> > +     .flags = CLAMP_IO | AON_RESET,
> > +};
> > +
> > +static struct clk_regmap *gpucc_msm8998_clocks[] = {
> > +     [GPUPLL0] = &gpupll0.clkr,
> > +     [GPUPLL0_OUT_EVEN] = &gpupll0_out_even.clkr,
> > +     [RBCPR_CLK_SRC] = &rbcpr_clk_src.clkr,
> > +     [GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr,
> > +     [RBBMTIMER_CLK_SRC] = &rbbmtimer_clk_src.clkr,
> > +     [GFX3D_ISENSE_CLK_SRC] = &gfx3d_isense_clk_src.clkr,
> > +     [RBCPR_CLK] = &rbcpr_clk.clkr,
> > +     [GFX3D_CLK] = &gfx3d_clk.clkr,
> > +     [RBBMTIMER_CLK] = &rbbmtimer_clk.clkr,
> > +     [GFX3D_ISENSE_CLK] = &gfx3d_isense_clk.clkr,
> > +     [GPUCC_CXO_CLK] = &gpucc_cxo_clk.clkr,
> > +};
> > +
> > +static struct gdsc *gpucc_msm8998_gdscs[] = {
> > +     [GPU_CX_GDSC] = &gpu_cx_gdsc,
> > +     [GPU_GX_GDSC] = &gpu_gx_gdsc,
> > +};
> > +
> > +static const struct qcom_reset_map gpucc_msm8998_resets[] = {
> > +     [GPU_CX_BCR] = { 0x1000 },
> > +     [RBCPR_BCR] = { 0x1050 },
> > +     [GPU_GX_BCR] = { 0x1090 },
> > +     [GPU_ISENSE_BCR] = { 0x1120 },
> > +};
> > +
> > +static const struct regmap_config gpucc_msm8998_regmap_config = {
> > +     .reg_bits       = 32,
> > +     .reg_stride     = 4,
> > +     .val_bits       = 32,
> > +     .max_register   = 0x9000,
> > +     .fast_io        = true,
> > +};
> > +
> > +static const struct qcom_cc_desc gpucc_msm8998_desc = {
> > +     .config = &gpucc_msm8998_regmap_config,
> > +     .clks = gpucc_msm8998_clocks,
> > +     .num_clks = ARRAY_SIZE(gpucc_msm8998_clocks),
> > +     .resets = gpucc_msm8998_resets,
> > +     .num_resets = ARRAY_SIZE(gpucc_msm8998_resets),
> > +     .gdscs = gpucc_msm8998_gdscs,
> > +     .num_gdscs = ARRAY_SIZE(gpucc_msm8998_gdscs),
> > +};
> > +
> > +static const struct of_device_id gpucc_msm8998_match_table[] = {
> > +     { .compatible = "qcom,gpucc-msm8998" },
> > +     { }
> > +};
> > +MODULE_DEVICE_TABLE(of, gpucc_msm8998_match_table);
> > +
> > +static int gpucc_msm8998_probe(struct platform_device *pdev)
> > +{
> > +     struct regmap *regmap;
> > +
> > +     regmap = qcom_cc_map(pdev, &gpucc_msm8998_desc);
> > +     if (IS_ERR(regmap))
> > +             return PTR_ERR(regmap);
> > +
> > +     /* force periph logic on to avoid perf counter corruption */
> > +     regmap_write_bits(regmap, gfx3d_clk.clkr.enable_reg, BIT(13), BIT(13));
> > +     /* tweak droop detector (GPUCC_GPU_DD_WRAP_CTRL) to reduce leakage */
> > +     regmap_write_bits(regmap, gfx3d_clk.clkr.enable_reg, BIT(0), BIT(0));
> > +
> > +     return qcom_cc_really_probe(pdev, &gpucc_msm8998_desc, regmap);
> > +}
> > +
> > +static struct platform_driver gpucc_msm8998_driver = {
> > +     .probe          = gpucc_msm8998_probe,
> > +     .driver         = {
> > +             .name   = "gpucc-msm8998",
> > +             .of_match_table = gpucc_msm8998_match_table,
> > +     },
> > +};
> > +module_platform_driver(gpucc_msm8998_driver);
> > +
> > +MODULE_DESCRIPTION("QCOM GPUCC MSM8998 Driver");
> > +MODULE_LICENSE("GPL v2");
> >
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation.
>
> --

  reply	other threads:[~2019-10-18 14:24 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-02  1:15 [PATCH v4 0/2] MSM8998 GPUCC Support Jeffrey Hugo
2019-10-02  1:16 ` [PATCH v4 1/2] clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver Jeffrey Hugo
2019-10-17 21:50   ` Stephen Boyd
2019-10-17 23:16     ` Jeffrey Hugo
2019-10-18 21:11       ` Jeffrey Hugo
2019-10-27 21:36         ` Stephen Boyd
2019-10-28 14:17           ` Jeffrey Hugo
2019-10-18  4:11   ` Taniya Das
2019-10-18 14:24     ` Jeffrey Hugo [this message]
2019-10-02  1:17 ` [PATCH v4 2/2] arm64: dts: qcom: msm8998: Add gpucc node Jeffrey Hugo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAOCk7NraMpxpu5opK0JrFzY1UkMFi=U+Npq8jJWbRo15q8z4jA@mail.gmail.com' \
    --to=jeffrey.l.hugo@gmail.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.w.gonzalez@free.fr \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    --cc=tdas@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).