[PATCH] clk: imx7ulp: Correct DDR clock mux options

[PATCH] clk: imx7ulp: Correct DDR clock mux options

[Anson Huang]

In the latest reference manual Rev.0,06/2019, the DDR clock mux
is extended to 2 bits, and the clock options are also changed,
correct them accordingly.

Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
This patch should be based on https://patchwork.kernel.org/patch/11185029/
---
 drivers/clk/imx/clk-imx7ulp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
index b2c5866..c4b78a2 100644
--- a/drivers/clk/imx/clk-imx7ulp.c
+++ b/drivers/clk/imx/clk-imx7ulp.c
@@ -25,7 +25,7 @@ static const char * const spll_sels[]		= { "spll", "spll_pfd_sel", };
 static const char * const apll_pfd_sels[]	= { "apll_pfd0", "apll_pfd1", "apll_pfd2", "apll_pfd3", };
 static const char * const apll_sels[]		= { "apll", "apll_pfd_sel", };
 static const char * const scs_sels[]		= { "dummy", "sosc", "sirc", "firc", "dummy", "apll_sel", "spll_sel", "dummy", };
-static const char * const ddr_sels[]		= { "apll_pfd_sel", "upll", };
+static const char * const ddr_sels[]		= { "apll_pfd_sel", "dummy", "dummy", "dummy", };
 static const char * const nic_sels[]		= { "firc", "ddr_clk", };
 static const char * const periph_plat_sels[]	= { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
 static const char * const periph_bus_sels[]	= { "dummy", "sosc_bus_clk", "mpll", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
@@ -118,7 +118,7 @@ static void __init imx7ulp_clk_scg1_init(struct device_node *np)
 	clks[IMX7ULP_CLK_SYS_SEL]	= imx_clk_hw_mux2("scs_sel", base + 0x14, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
 	clks[IMX7ULP_CLK_HSRUN_SYS_SEL] = imx_clk_hw_mux2("hsrun_scs_sel", base + 0x1c, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
 	clks[IMX7ULP_CLK_NIC_SEL]	= imx_clk_hw_mux2("nic_sel", base + 0x40, 28, 1, nic_sels, ARRAY_SIZE(nic_sels));
-	clks[IMX7ULP_CLK_DDR_SEL]	= imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 1, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
+	clks[IMX7ULP_CLK_DDR_SEL]	= imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 2, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
 
 	clks[IMX7ULP_CLK_CORE_DIV]	= imx_clk_hw_divider_flags("divcore",	"scs_sel",  base + 0x14, 16, 4, CLK_SET_RATE_PARENT);
 	clks[IMX7ULP_CLK_HSRUN_CORE_DIV] = imx_clk_hw_divider_flags("hsrun_divcore", "hsrun_scs_sel", base + 0x1c, 16, 4, CLK_SET_RATE_PARENT);
-- 
2.7.4

Re: [PATCH] clk: imx7ulp: Correct DDR clock mux options

[Fabio Estevam]

On Fri, Oct 11, 2019 at 6:11 AM Anson Huang <Anson.Huang@nxp.com> wrote:
>
> In the latest reference manual Rev.0,06/2019, the DDR clock mux
> is extended to 2 bits, and the clock options are also changed,
> correct them accordingly.
>
> Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver")
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Reviewed-by: Fabio Estevam <festevam@gmail.com>

Re: [PATCH] clk: imx7ulp: Correct DDR clock mux options

[Shawn Guo]

On Fri, Oct 11, 2019 at 05:09:00PM +0800, Anson Huang wrote:
> In the latest reference manual Rev.0,06/2019, the DDR clock mux
> is extended to 2 bits, and the clock options are also changed,
> correct them accordingly.
> 
> Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver")
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Applied, thanks.