From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.8 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, MENTIONS_GIT_HOSTING,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9C9DAC742A1 for ; Thu, 11 Jul 2019 19:35:07 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 4A39721537 for ; Thu, 11 Jul 2019 19:35:07 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=amarulasolutions.com header.i=@amarulasolutions.com header.b="HUGOYlUb" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728485AbfGKTfG (ORCPT ); Thu, 11 Jul 2019 15:35:06 -0400 Received: from mail-wm1-f67.google.com ([209.85.128.67]:53333 "EHLO mail-wm1-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728401AbfGKTfG (ORCPT ); Thu, 11 Jul 2019 15:35:06 -0400 Received: by mail-wm1-f67.google.com with SMTP id x15so6764517wmj.3 for ; Thu, 11 Jul 2019 12:35:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amarulasolutions.com; s=google; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=BsG/SUhoid0dTPUM8Poctc1qgljLzJxI5QGoB4XkXj4=; b=HUGOYlUbwwHaqkIl78JsD3TNj/NSl3onqA1Fm13sf9RktADu6zYU13rAh04jLbD7Rx u1o4zSpHLurmewOmIGJYi2Bvd4MIw421zql06GMUIhEDdB2dEbSyR6kEQiS1yRkygt+3 drN2ev/GrK2RrSsa54Oh8PLUXB8dotNKu5wuI= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=BsG/SUhoid0dTPUM8Poctc1qgljLzJxI5QGoB4XkXj4=; b=LAY+hdMGqAd2PpT/RBDXGF12fBlONq3nUo/td0MERZoVLDN1KbP134cTMXme0QNSI9 w4WhXHPCKF4Myaih8hRlmJGmUqmMW+QTaGyZ3O/Q1ycnZbIMBu8EhrKBieWSpaNlfuxK MM64Ntg/cpPAJ3HhAwxGJg0jh868esGivyFvdooKQ2MzYoTCiHeFRHXpI5aPn54s1+3w rc6oT9u/zxQ6rADy+zAYJPCj5LbN66C823/9EuO0zqSgKpZ6WKm6xH0Bp3U8gj0g6gyV jDZo3whNpm6H4d7PQrIY2jCmf0TcckU7bzZs38AltSp8Dan2P/PvEFWrpqqFYmbzZLTL c7jQ== X-Gm-Message-State: APjAAAV/2RFhjajKZO1E6e/OF3gXm76iVCHDs8vrjSkAnxFW1ppUhAG/ 2yCRa6SYSMEm7EK8MdLhF9S7ufi+JLSYZuA2aLP8gA== X-Google-Smtp-Source: APXvYqx7EzRwlI1BU7mOpuHkh4EiGZyoGTW3F3QUN9UrcrRKi0FTuMW/1exaqrn+SzdoNN2maXKFfyJ7Fm1m+0cZK3Y= X-Received: by 2002:a1c:b189:: with SMTP id a131mr5718191wmf.7.1562873702946; Thu, 11 Jul 2019 12:35:02 -0700 (PDT) MIME-Version: 1.0 References: <20190201143102.rcvrxstc365mezvx@flea> <20190605064933.6bmskkxzzgn35xz7@flea> <20190614142406.ybdiqfppo5mc5bgq@flea> <20190625144930.5hegt6bkzqzykjid@flea> <20190703114933.u3x4ej3v7ocewvif@flea> <20190711100100.cty3s6rs3w27low6@flea> In-Reply-To: From: Michael Nazzareno Trimarchi Date: Thu, 11 Jul 2019 21:34:51 +0200 Message-ID: Subject: Re: [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI To: Maxime Ripard Cc: Jagan Teki , David Airlie , Daniel Vetter , Chen-Yu Tsai , Michael Turquette , Rob Herring , Mark Rutland , linux-arm-kernel , linux-kernel , linux-clk , dri-devel , devicetree , linux-amarula , linux-sunxi Content-Type: text/plain; charset="UTF-8" Sender: linux-clk-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-clk@vger.kernel.org Hi On Thu, Jul 11, 2019 at 7:43 PM Michael Nazzareno Trimarchi wrote: > > Hi Maxime > > On Thu, Jul 11, 2019 at 2:23 PM Maxime Ripard wrote: > > > > On Fri, Jul 05, 2019 at 07:52:27PM +0200, Michael Nazzareno Trimarchi wrote: > > > On Wed, Jul 3, 2019 at 1:49 PM Maxime Ripard wrote: > > > > > > > > On Tue, Jun 25, 2019 at 09:00:36PM +0530, Jagan Teki wrote: > > > > > On Tue, Jun 25, 2019 at 8:19 PM Maxime Ripard wrote: > > > > > > > > > > > > On Thu, Jun 20, 2019 at 11:57:44PM +0530, Jagan Teki wrote: > > > > > > > On Fri, Jun 14, 2019 at 7:54 PM Maxime Ripard wrote: > > > > > > > > > > > > > > > > On Wed, Jun 05, 2019 at 01:03:16PM +0530, Jagan Teki wrote: > > > > > > > > > On Wed, Jun 5, 2019 at 12:19 PM Maxime Ripard wrote: > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > I've reordered the mail a bit to work on chunks > > > > > > > > > > > > > > > > > > > > On Fri, May 24, 2019 at 03:37:42PM +0530, Jagan Teki wrote: > > > > > > > > > > > > I wish it was in your commit log in the first place, instead of having > > > > > > > > > > > > to exchange multiple mails over this. > > > > > > > > > > > > > > > > > > > > > > > > However, I don't think that's quite true, and it might be a bug in > > > > > > > > > > > > Allwinner's implementation (or rather something quite confusing). > > > > > > > > > > > > > > > > > > > > > > > > You're right that the lcd_rate and pll_rate seem to be generated from > > > > > > > > > > > > the pixel clock, and it indeed looks like the ratio between the pixel > > > > > > > > > > > > clock and the TCON dotclock is defined through the number of bits per > > > > > > > > > > > > lanes. > > > > > > > > > > > > > > > > > > > > > > > > However, in this case, dsi_rate is actually the same than lcd_rate, > > > > > > > > > > > > since pll_rate is going to be divided by dsi_div: > > > > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L791 > > > > > > > > > > > > > > > > > > > > > > > > Since lcd_div is 1, it also means that in this case, dsi_rate == > > > > > > > > > > > > dclk_rate. > > > > > > > > > > > > > > > > > > > > > > > > The DSI module clock however, is always set to 148.5 MHz. Indeed, if > > > > > > > > > > > > we look at: > > > > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L804 > > > > > > > > > > > > > > > > > > > > > > > > We can see that the rate in clk_info is used if it's different than > > > > > > > > > > > > 0. This is filled by disp_al_lcd_get_clk_info, which, in the case of a > > > > > > > > > > > > DSI panel, will hardcode it to 148.5 MHz: > > > > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/disp_al.c#L164 > > > > > > > > > > > > > > > > > > > > > > Let me explain, something more. > > > > > > > > > > > > > > > > > > > > > > According to bsp there are clk_info.tcon_div which I will explain below. > > > > > > > > > > > clk_info.dsi_div which is dynamic and it depends on bpp/lanes, so it > > > > > > > > > > > is 6 for 24bpp and 4 lanes devices. > > > > > > > > > > > > > > > > > > > > > > PLL rate here depends on dsi_div (not tcon_div) > > > > > > > > > > > > > > > > > > > > > > Code here > > > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L784 > > > > > > > > > > > > > > > > > > > > > > is computing the actual set rate, which depends on dsi_rate. > > > > > > > > > > > > > > > > > > > > > > lcd_rate = dclk_rate * clk_info.dsi_div; > > > > > > > > > > > dsi_rate = pll_rate / clk_info.dsi_div; > > > > > > > > > > > > > > > > > > > > > > Say if the dclk_rate 148MHz then the dsi_rate is 888MHz which set rate > > > > > > > > > > > for above link you mentioned. > > > > > > > > > > > > > > > > > > > > > > Here are the evidence with some prints. > > > > > > > > > > > > > > > > > > > > > > https://gist.github.com/openedev/9bae2d87d2fcc06b999fe48c998b7043 > > > > > > > > > > > https://gist.github.com/openedev/700de2e3701b2bf3ad1aa0f0fa862c9a > > > > > > > > > > > > > > > > > > > > Ok, so we agree up to this point, and the prints confirm that the > > > > > > > > > > analysis above is the right one. > > > > > > > > > > > > > > > > > > > > > > So, the DSI clock is set to this here: > > > > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L805 > > > > > > > > > > > > > > > > > > > > Your patch doesn't address that, so let's leave that one alone. > > > > > > > > > > > > > > > > > > Basically this is final pll set rate when sun4i_dotclock.c called the > > > > > > > > > desired rate with ccu_nkm.c so it ended the final rate with parent as > > > > > > > > > Line 8 of > > > > > > > > > https://gist.github.com/openedev/700de2e3701b2bf3ad1aa0f0fa862c9a > > > > > > > > > > > > > > > > If that's important to the driver, it should be set explicitly then, > > > > > > > > and not work by accident. > > > > > > > > > > > > > > > > > > > > The TCON *module* clock (the one in the clock controller) has been set > > > > > > > > > > > > to lcd_rate (so the pixel clock times the number of bits per lane) here: > > > > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L800 > > > > > > > > > > > > > > > > > > > > > > > > And the PLL has been set to the same rate here: > > > > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L794 > > > > > > > > > > > > > > > > > > > > > > > > Let's take a step back now: that function we were looking at, > > > > > > > > > > > > lcd_clk_config, is called by lcd_clk_enable, which is in turn called > > > > > > > > > > > > by disp_lcd_enable here: > > > > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L1328 > > > > > > > > > > > > > > > > > > > > > > > > The next function being called is disp_al_lcd_cfg, and that function > > > > > > > > > > > > will hardcode the TCON dotclock divider to 4, here: > > > > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/disp_al.c#L240 > > > > > > > > > > > > > > > > > > > > > > tcon_div from BSP point-of-view of there are two variants > > > > > > > > > > > 00) clk_info.tcon_div which is 4 and same is set the divider position > > > > > > > > > > > in SUN4I_TCON0_DCLK_REG (like above link refer) > > > > > > > > > > > 01) tcon_div which is 4 and used for edge timings computation > > > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L12 > > > > > > > > > > > > > > > > > > > > > > The real reason for 01) is again 4 is they set the divider to 4 in 00) > > > > > > > > > > > which is technically wrong because the dividers which used during > > > > > > > > > > > dotclock in above (dsi_div) should be used here as well. Since there > > > > > > > > > > > is no dynamic way of doing this BSP hard-coding these values. > > > > > > > > > > > > > > > > > > > > > > Patches 5,6,7 on this series doing this > > > > > > > > > > > https://patchwork.freedesktop.org/series/60847/ > > > > > > > > > > > > > > > > > > > > > > Hope this explanation helps? > > > > > > > > > > > > > > > > > > > > It doesn't. > > > > > > > > > > > > > > > > > > > > The clock tree is this one: > > > > > > > > > > > > > > > > > > > > PLL(s) -> TCON module clock -> TCON dotclock. > > > > > > > > > > > > > > > > > > > > The links I mentioned above show that the clock set to lcd_rate is the > > > > > > > > > > TCON module clocks (and it should be the one taking the bpp and lanes > > > > > > > > > > into account), while the TCON dotclock uses a fixed divider of 4. > > > > > > > > > > > > > > > > > > Sorry, I can argue much other-than giving some code snips, according to [1] > > > > > > > > > > > > > > > > > > 00) Line 785, 786 with dclk_rate 148000000 > > > > > > > > > > > > > > > > > > lcd_rate = dclk_rate * clk_info.dsi_div; > > > > > > > > > pll_rate = lcd_rate * clk_info.lcd_div; > > > > > > > > > > > > > > > > > > Since dsi_div is 6 (bpp/lanes), lcd_div 1 > > > > > > > > > > > > > > > > > > lcd_rate = 888000000, pll_rate = 888000000 > > > > > > > > > > > > > > > > > > 01) Line 801, 804 are final rates computed as per clock driver (say > > > > > > > > > ccu_nkm in mainline) > > > > > > > > > > > > > > > > > > lcd_rate_set=891000000 > > > > > > > > > > > > > > > > > > As per your comments if it would be 4 then the desired numbers are > > > > > > > > > would be 592000000 not 888000000. > > > > > > > > > > > > > > > > > > This is what I'm trying to say in all mails, and same as verified with > > > > > > > > > 2-lanes devices as well where the dsi_div is 12 so the final rate is > > > > > > > > > 290MHz * 12 > > > > > > > > > > > > > > > > In the code you sent, you're forcing a divider on the internal TCON > > > > > > > > clock, while that one is fixed in the BSP. > > > > > > > > > > > > > > > > There's indeed the bpp / lanes divider, but it's used in the *parent* > > > > > > > > clock of the one you're changing. > > > > > > > > > > > > > > > > And the dsi0_clk clock you pointed out in the code snippet is yet > > > > > > > > another clock, the MIPI DSI module clock. > > > > > > > > > > > > > > Correct, look like I refereed wrong reference in the above mail. sorry > > > > > > > for the noise. > > > > > > > > > > > > > > Actually I'm trying to explain about pll_rate here which indeed > > > > > > > depends on dsi.div > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L786 > > > > > > > > > > > > > > lcd_rate = dclk_rate * clk_info.dsi_div; > > > > > > > pll_rate = lcd_rate * clk_info.lcd_div; > > > > > > > > > > > > > > Say > > > > > > > > > > > > > > 1) For 148MHz dclk_rate with dsi_div is 6 (24/4) lcd_div is 1 which > > > > > > > resulting pll_rate is 888MHz. > > > > > > > > > > > > > > 2) For 30MHz dclk_rate with 4 lane and 24 RGB the resulting pll_rate is 180MHz > > > > > > > > > > > > > > 3) For 27.5MHz dclk_rate with 2 lane and 24 RGB the resulting pll_rate is 330MHz > > > > > > > > > > > > > > Here is the few more logs in code, for case 2) > > > > > > > > > > > > > > [ 1.920441] sun4i_dclk_round_rate: min_div = 6 max_div = 6, rate = 30000000 > > > > > > > [ 1.920505] ideal = 180000000, rounded = 178200000 > > > > > > > [ 1.920509] sun4i_dclk_round_rate: div = 6 rate = 29700000 > > > > > > > [ 1.920514] sun4i_dclk_round_rate: min_div = 6 max_div = 6, rate = 30000000 > > > > > > > [ 1.920532] ideal = 1800ls and one DSI-RGB bridge. All of them do use > > > > > PLL_MIPI (pll_rate) and it indeed depends on bpp/lanes > > > > >00000, rounded = 178200000 > > > > > > > [ 1.920535] sun4i_dclk_round_rate: div = 6 rate = 29700000 > > > > > > > [ 1.920572] sun4i_dclk_recalc_rate: val = 1, rate = 178200000 > > > > > > > [ 1.920576] sun4i_dclk_recalc_rate: val = 1, rate = 178200000 > > > > > > > [ 1.920597] rate = 178200000 > > > > > > > [ 1.920599] parent_rate = 297000000 > > > > > > > [ 1.920602] reg = 0x90c00000 > > > > > > > [ 1.920605] _nkm.n = 3, nkm->n.offset = 0x1, nkm->n.shift = 8 > > > > > > > [ 1.920609] _nkm.k = 2, nkm->k.offset = 0x1, nkm->k.shift = 4 > > > > > > > [ 1.920612] _nkm.m = 10, nkm->m.offset = 0x1, nkm->m.shift = 0 > > > > > > > [ 1.920958] sun4i_dclk_set_rate div 6 > > > > > > > [ 1.920966] sun4i_dclk_recalc_rate: val = 6, rate = 29700000 > > > > > > > > > > > > > > and clk_summary: > > > > > > > > > > > > > > pll-video0 1 1 1 297000000 > > > > > > > 0 0 50000 > > > > > > > hdmi 0 0 0 297000000 > > > > > > > 0 0 50000 > > > > > > > tcon1 0 0 0 297000000 > > > > > > > 0 0 50000 > > > > > > > pll-mipi 1 1 1 178200000 > > > > > > > 0 0 50000 > > > > > > > tcon0 2 2 1 178200000 > > > > > > > 0 0 50000 > > > > > > > tcon-pixel-clock 1 1 1 29700000 > > > > > > > 0 0 50000 > > > > > > > pll-video0-2x 0 0 0 594000000 > > > > > > > 0 0 50000 > > > > > > > > > > > > This discussion is going nowhere. I'm telling you that your patch > > > > > > doesn't apply the divider you want on the proper clock, and you're > > > > > > replying that indeed, you're applying it on the wrong clock. > > > > > > > > > > > > It might work by accident in your case, but the board I have here > > > > > > clearly indicates otherwise, so there's two possible way out here: > > > > > > > > > > > > - Either you apply that divider to the TCON *module* clock, and not > > > > > > the dclk > > > > > > > > > > > > - Or you point to somewhere in the allwinner code where the bpp / > > > > > > lanes divider is used for the dclk divider. > > > > > > > > > > I don't know how to proceed further on this, as you say it might work > > > > > in accident but I have tested this in A33, A64 and R40 with 4 > > > > > different DSI panels and one DSI-RGB bridge. All of them do use > > > > > PLL_MIPI (pll_rate) and it indeed depends on bpp/lanes > > > > > > > > > > 4-lane, 24-bit: Novatek NT35596 panel > > > > > 4-lane, 24-bit: Feiyang, FY07024di26a30d panel > > > > > 4-lane, 24-bit: Bananapi-s070wv20 panel > > > > > 2-lane, 24-bit: Techstar,ts8550b panel > > > > > > > > > > and > > > > > > > > > > 4-lane, 24-bit, ICN6211 DSI-to-RGB bridge panel > > > > > > > > > > All above listed panels and bridges are working as per BSP and do > > > > > follow bpp/lanes and for DIVIDER 4 no panel is working. > > > > > > > > Look. I'm not saying that there's no issue, I'm saying that your > > > > patch, applied to the clock you're applying it to, doesn't make sense > > > > and isn't what the BSP does. > > > > > > tcon-pixel clock is the rate that you want to achive on display side > > > and if you have 4 lanes 32bit or lanes and different bit number that > > > you need to have a clock that is able to put outside bits and speed > > > equal to pixel-clock * bits / lanes. so If you want a pixel-clock of > > > 40 mhz and you have 32bits and 4 lanes you need to have a clock of > > > 40 * 32 / 4 in no-burst mode. I think that this is done but most of > > > the display. > > > > So this is what the issue is then? > > > > This one does make sense, and you should just change the rate in the > > call to clk_set_rate in sun4i_tcon0_mode_set_cpu. > > > > I'm still wondering why that hasn't been brought up in either the > > discussion or the commit log before though. > > > Something like this? > > drivers/gpu/drm/sun4i/sun4i_tcon.c | 20 +++++++++++--------- > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 2 -- > 2 files changed, 11 insertions(+), 11 deletions(-) > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c > b/drivers/gpu/drm/sun4i/sun4i_tcon.c > index 64c43ee6bd92..42560d5c327c 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > @@ -263,10 +263,11 @@ static int sun4i_tcon_get_clk_delay(const struct > drm_display_mode *mode, > } > > static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon, > - const struct drm_display_mode *mode) > + const struct drm_display_mode *mode, > + u32 tcon_mul) > { > /* Configure the dot clock */ > - clk_set_rate(tcon->dclk, mode->crtc_clock * 1000); > + clk_set_rate(tcon->dclk, mode->crtc_clock * tcon_mul * 1000); > > /* Set the resolution */ > regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG, > @@ -335,12 +336,13 @@ static void sun4i_tcon0_mode_set_cpu(struct > sun4i_tcon *tcon, > u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format); > u8 lanes = device->lanes; > u32 block_space, start_delay; > - u32 tcon_div; > + u32 tcon_div, tcon_mul; > > - tcon->dclk_min_div = SUN6I_DSI_TCON_DIV; > - tcon->dclk_max_div = SUN6I_DSI_TCON_DIV; > + tcon->dclk_min_div = 4; > + tcon->dclk_max_div = 127; > > - sun4i_tcon0_mode_set_common(tcon, mode); > + tcon_mul = bpp / lanes; > + sun4i_tcon0_mode_set_common(tcon, mode, tcon_mul); > Maybe wrong clock ;) but is this your idea? Michael > /* Set dithering if needed */ > sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder)); > @@ -366,7 +368,7 @@ static void sun4i_tcon0_mode_set_cpu(struct > sun4i_tcon *tcon, > */ > regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div); > tcon_div &= GENMASK(6, 0); > - block_space = mode->htotal * bpp / (tcon_div * lanes); > + block_space = mode->htotal * tcon_div * tcon_mul; > block_space -= mode->hdisplay + 40; > > regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG, > @@ -408,7 +410,7 @@ static void sun4i_tcon0_mode_set_lvds(struct > sun4i_tcon *tcon, > > tcon->dclk_min_div = 7; > tcon->dclk_max_div = 7; > - sun4i_tcon0_mode_set_common(tcon, mode); > + sun4i_tcon0_mode_set_common(tcon, mode, 1); > > /* Set dithering if needed */ > sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder)); > @@ -487,7 +489,7 @@ static void sun4i_tcon0_mode_set_rgb(struct > sun4i_tcon *tcon, > > tcon->dclk_min_div = 6; > tcon->dclk_max_div = 127; > - sun4i_tcon0_mode_set_common(tcon, mode); > + sun4i_tcon0_mode_set_common(tcon, mode, 1); > > /* Set dithering if needed */ > sun4i_tcon0_mode_set_dithering(tcon, connector); > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > index 5c3ad5be0690..a07090579f84 100644 > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > @@ -13,8 +13,6 @@ > #include > #include > > -#define SUN6I_DSI_TCON_DIV 4 > - > struct sun6i_dsi { > struct drm_connector connector; > struct drm_encoder encoder; > > > > > Now in burst mode I don't know how should work the calculation of > > > the clock for the require bandwidth and even I understand your > > > comment I would like to have your clock tree after you boot on the > > > display side and if it is possible I want to assemble a kit like you > > > have. > > > > The setup is probably going to be a bit difficult to reproduce, it's a > > prototype that I have that can't really be found anywhere. Jagan asked > > me on IRC for the reference, and he found the part, but it's unclear > > to me if it can be easily adapted to a common board. > > > > However, I'm not even sure we need this. I'll test the next version > > and let you know if it works. > > > > Maxime > > > > -- > > Maxime Ripard, Bootlin > > Embedded Linux and Kernel engineering > > https://bootlin.com > > > > -- > | Michael Nazzareno Trimarchi Amarula Solutions BV | > | COO - Founder Cruquiuskade 47 | > | +31(0)851119172 Amsterdam 1018 AM NL | > | [`as] http://www.amarulasolutions.com | -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com |