RE: [EXT] RE: [v6 2/2] clk: ls1028a: Add clock driver for Display output interface

[Wen He <wen.he_1@nxp.com>]

> -----Original Message-----
> From: Li Yang <leoyang.li@nxp.com>
> Sent: 2019年11月9日 4:20
> To: Wen He <wen.he_1@nxp.com>
> Cc: Stephen Boyd <sboyd@kernel.org>; Mark Rutland
> <mark.rutland@arm.com>; Michael Turquette <mturquette@baylibre.com>;
> Rob Herring <robh+dt@kernel.org>; devicetree@vger.kernel.org;
> linux-clk@vger.kernel.org; linux-devel@linux.nxdi.nxp.com;
> linux-kernel@vger.kernel.org
> Subject: Re: [EXT] RE: [v6 2/2] clk: ls1028a: Add clock driver for Display output
> interface
> 
> Caution: EXT Email
> 
> On Thu, Nov 7, 2019 at 8:21 PM Wen He <wen.he_1@nxp.com> wrote:
> >
> >
> >
> > > -----Original Message-----
> > > From: Stephen Boyd <sboyd@kernel.org>
> > > Sent: 2019年11月8日 6:58
> > > To: Leo Li <leoyang.li@nxp.com>; Mark Rutland
> > > <mark.rutland@arm.com>; Michael Turquette
> <mturquette@baylibre.com>;
> > > Rob Herring <robh+dt@kernel.org>; Wen He <wen.he_1@nxp.com>;
> > > devicetree@vger.kernel.org; linux-clk@vger.kernel.org;
> > > linux-devel@linux.nxdi.nxp.com; linux-kernel@vger.kernel.org
> > > Subject: [EXT] RE: [v6 2/2] clk: ls1028a: Add clock driver for
> > > Display output interface
> > >
> > > Caution: EXT Email
> > >
> > > Quoting Wen He (2019-11-06 19:13:48)
> > > >
> > > > > > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index
> > > > > > 0138fb14e6f8..d23b7464aba8 100644
> > > > > > --- a/drivers/clk/Makefile
> > > > > > +++ b/drivers/clk/Makefile
> > > > > > @@ -45,6 +45,7 @@ obj-$(CONFIG_COMMON_CLK_OXNAS)
> > > +=
> > > > > > clk-oxnas.o
> > > > > >  obj-$(CONFIG_COMMON_CLK_PALMAS)            +=
> clk-palmas.o
> > > > > >  obj-$(CONFIG_COMMON_CLK_PWM)               +=
> clk-pwm.o
> > > > > >  obj-$(CONFIG_CLK_QORIQ)                    += clk-qoriq.o
> > > > > > +obj-$(CONFIG_CLK_LS1028A_PLLDIG)   += clk-plldig.o
> > > > >
> > > > > Wrong ordering.  This section of Makefile requires ordering by
> > > > > driver file
> > > > > name:
> > > > >
> > > > > # hardware specific clock types
> > > > > # please keep this section sorted lexicographically by file path
> > > > > name
> > > > >
> > > >
> > > > Hi Leo,
> > > >
> > > > Stephen once suggest the Kconfig variable name should be given a
> > > > more specific name like CLK_LS1028A_PLLDIG, so I have to changed it.
> > > >
> > > > Hi Stephen,
> > > >
> > > > How do you think?
> > > >
> > >
> > >
> > > Config name looks fine to me, but you haven't sorted this based on
> > > the file name, i.e. clk-plldig.o, so please insert this in the right place in this
> file.
> >
> > Wow, Understand now..
> >
> > Should be sort this file like below, right?
> > obj-$(CONFIG_COMMON_CLK_PWM)   += clk-pwm.o
> > obj-$(CONFIG_CLK_LS1028A_PLLDIG)   += clk-plldig.o
> > obj-$(CONFIG_CLK_QORIQ)           += clk-qoriq.o
> 
> No.  The correct order should be:
> clk-plldig.o
> clk-pwm.o
> clk-qoriq.o

Understand, I will send next version patch.

Thanks && Best Regards,
Wen

> 
> Regards,
> Leo