Linux-Clk Archive on lore.kernel.org
 help / Atom feed
* [PATCH v1 4/6] phy: qcom-qmp: Add QMP V3 USB3 PHY support for msm8998
@ 2019-01-04 16:50 Jeffrey Hugo
  2019-01-11 19:45 ` Rob Herring
  0 siblings, 1 reply; 3+ messages in thread
From: Jeffrey Hugo @ 2019-01-04 16:50 UTC (permalink / raw)
  To: kishon, robh+dt
  Cc: bjorn.andersson, andy.gross, david.brown, mturquette, sboyd,
	linux-arm-msm, linux-clk, linux-kernel, mark.rutland, devicetree,
	gregkh, balbi, linux-usb, Jeffrey Hugo

MSM8998 contains a single QMP v3 USB3 phy similar to the existing sdm845
support, however MSM8998 does not have display port (DP) support.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
---
 .../devicetree/bindings/phy/qcom-qmp-phy.txt       |   5 +
 drivers/phy/qualcomm/phy-qcom-qmp.c                | 142 +++++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h                |   4 +
 3 files changed, 151 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index 41a1074..6061b6f 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -9,6 +9,7 @@ Required properties:
 	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
 	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
 	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
+	       "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
 	       "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
 	       "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
 	       "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
@@ -42,6 +43,8 @@ Required properties:
 			"aux", "cfg_ahb", "ref".
 		For "qcom,msm8996-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref".
+		For "qcom,msm8998-qmp-usb3-phy" must contain:
+			"aux", "cfg_ahb", "ref".
 		For "qcom,sdm845-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref", "com_aux".
 		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
@@ -60,6 +63,8 @@ Required properties:
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"phy", "common", "cfg".
 		For "qcom,msm8996-qmp-usb3-phy" must contain
+		 "phy", "common".
+		For "qcom,msm8998-qmp-usb3-phy" must contain
 			"phy", "common".
 		For "qcom,sdm845-qmp-usb3-phy" must contain:
 			"phy", "common".
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index b400681..c0111a6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -687,6 +687,116 @@ enum qphy_reg_layout {
 	QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
 };
 
+static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+
 /* struct qmp_phy_cfg - per-PHY initialization config */
 struct qmp_phy_cfg {
 	/* phy-type - PCIE/UFS/USB */
@@ -1036,6 +1146,35 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	.no_pcs_sw_reset	= true,
 };
 
+static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
+	.type                   = PHY_TYPE_USB3,
+	.nlanes                 = 1,
+
+	.serdes_tbl             = msm8998_usb3_serdes_tbl,
+	.serdes_tbl_num         = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
+	.tx_tbl                 = msm8998_usb3_tx_tbl,
+	.tx_tbl_num             = ARRAY_SIZE(msm8998_usb3_tx_tbl),
+	.rx_tbl                 = msm8998_usb3_rx_tbl,
+	.rx_tbl_num             = ARRAY_SIZE(msm8998_usb3_rx_tbl),
+	.pcs_tbl                = msm8998_usb3_pcs_tbl,
+	.pcs_tbl_num            = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
+	.clk_list               = msm8996_phy_clk_l,
+	.num_clks               = ARRAY_SIZE(msm8996_phy_clk_l),
+	.reset_list             = msm8996_usb3phy_reset_l,
+	.num_resets             = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list              = qmp_phy_vreg_l,
+	.num_vregs              = ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs                   = qmp_v3_usb3phy_regs_layout,
+
+	.start_ctrl             = SERDES_START | PCS_START,
+	.pwrdn_ctrl             = SW_PWRDN,
+	.mask_pcs_ready         = PHYSTATUS,
+
+	.is_dual_lane_phy       = true,
+	.tx_b_lane_offset       = 0x400,
+	.rx_b_lane_offset       = 0x400,
+};
+
 static void qcom_qmp_phy_configure(void __iomem *base,
 				   const unsigned int *regs,
 				   const struct qmp_phy_init_tbl tbl[],
@@ -1747,6 +1886,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
 	}, {
 		.compatible = "qcom,sdm845-qmp-ufs-phy",
 		.data = &sdm845_ufsphy_cfg,
+	}, {
+		.compatible = "qcom,msm8998-qmp-usb3-phy",
+		.data = &msm8998_usb3phy_cfg,
 	},
 	{ },
 };
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index d201cc3..a1b6cde 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -174,6 +174,7 @@
 #define QSERDES_V3_COM_DIV_FRAC_START1_MODE1		0x0c4
 #define QSERDES_V3_COM_DIV_FRAC_START2_MODE1		0x0c8
 #define QSERDES_V3_COM_DIV_FRAC_START3_MODE1		0x0cc
+#define QSERDES_V3_COM_INTEGLOOP_INITVAL		0x0d0
 #define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0		0x0d8
 #define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0		0x0dc
 #define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1		0x0e0
@@ -201,6 +202,7 @@
 #define QSERDES_V3_COM_DEBUG_BUS2			0x170
 #define QSERDES_V3_COM_DEBUG_BUS3			0x174
 #define QSERDES_V3_COM_DEBUG_BUS_SEL			0x178
+#define QSERDES_V3_COM_CMN_MODE				0x184
 
 /* Only for QMP V3 PHY - TX registers */
 #define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX		0x044
@@ -211,6 +213,7 @@
 #define QSERDES_V3_TX_RCV_DETECT_LVL_2			0x0a4
 
 /* Only for QMP V3 PHY - RX registers */
+#define QSERDES_V3_RX_UCDR_FO_GAIN			0x008
 #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF			0x00c
 #define QSERDES_V3_RX_UCDR_SO_GAIN			0x014
 #define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF		0x024
@@ -219,6 +222,7 @@
 #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN		0x030
 #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE	0x034
 #define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW		0x03c
+#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH		0x040
 #define QSERDES_V3_RX_UCDR_PI_CONTROLS			0x044
 #define QSERDES_V3_RX_RX_TERM_BW			0x07c
 #define QSERDES_V3_RX_VGA_CAL_CNTRL1			0x0bc
-- 
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v1 4/6] phy: qcom-qmp: Add QMP V3 USB3 PHY support for msm8998
  2019-01-04 16:50 [PATCH v1 4/6] phy: qcom-qmp: Add QMP V3 USB3 PHY support for msm8998 Jeffrey Hugo
@ 2019-01-11 19:45 ` Rob Herring
  2019-01-11 19:48   ` Jeffrey Hugo
  0 siblings, 1 reply; 3+ messages in thread
From: Rob Herring @ 2019-01-11 19:45 UTC (permalink / raw)
  To: Jeffrey Hugo
  Cc: kishon, bjorn.andersson, andy.gross, david.brown, mturquette,
	sboyd, linux-arm-msm, linux-clk, linux-kernel, mark.rutland,
	devicetree, gregkh, balbi, linux-usb

On Fri, Jan 04, 2019 at 09:50:47AM -0700, Jeffrey Hugo wrote:
> MSM8998 contains a single QMP v3 USB3 phy similar to the existing sdm845
> support, however MSM8998 does not have display port (DP) support.
> 
> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
> ---
>  .../devicetree/bindings/phy/qcom-qmp-phy.txt       |   5 +
>  drivers/phy/qualcomm/phy-qcom-qmp.c                | 142 +++++++++++++++++++++
>  drivers/phy/qualcomm/phy-qcom-qmp.h                |   4 +
>  3 files changed, 151 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> index 41a1074..6061b6f 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> @@ -9,6 +9,7 @@ Required properties:
>  	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
>  	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
>  	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
> +	       "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,

Please make bindings a separate patch. Combining patch 1 and 2 
binding changes is fine.

Rob

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v1 4/6] phy: qcom-qmp: Add QMP V3 USB3 PHY support for msm8998
  2019-01-11 19:45 ` Rob Herring
@ 2019-01-11 19:48   ` Jeffrey Hugo
  0 siblings, 0 replies; 3+ messages in thread
From: Jeffrey Hugo @ 2019-01-11 19:48 UTC (permalink / raw)
  To: Rob Herring
  Cc: kishon, bjorn.andersson, andy.gross, david.brown, mturquette,
	sboyd, linux-arm-msm, linux-clk, linux-kernel, mark.rutland,
	devicetree, gregkh, balbi, linux-usb

On 1/11/2019 12:45 PM, Rob Herring wrote:
> On Fri, Jan 04, 2019 at 09:50:47AM -0700, Jeffrey Hugo wrote:
>> MSM8998 contains a single QMP v3 USB3 phy similar to the existing sdm845
>> support, however MSM8998 does not have display port (DP) support.
>>
>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>> ---
>>   .../devicetree/bindings/phy/qcom-qmp-phy.txt       |   5 +
>>   drivers/phy/qualcomm/phy-qcom-qmp.c                | 142 +++++++++++++++++++++
>>   drivers/phy/qualcomm/phy-qcom-qmp.h                |   4 +
>>   3 files changed, 151 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>> index 41a1074..6061b6f 100644
>> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>> @@ -9,6 +9,7 @@ Required properties:
>>   	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
>>   	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
>>   	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
>> +	       "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
> 
> Please make bindings a separate patch. Combining patch 1 and 2
> binding changes is fine.
> 
> Rob
> 

Sure.  Planning on re-spinning early next week to address a few comments.

-- 
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm 
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-04 16:50 [PATCH v1 4/6] phy: qcom-qmp: Add QMP V3 USB3 PHY support for msm8998 Jeffrey Hugo
2019-01-11 19:45 ` Rob Herring
2019-01-11 19:48   ` Jeffrey Hugo

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org linux-clk@archiver.kernel.org
	public-inbox-index linux-clk


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/ public-inbox