Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: linux-rpi-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Phil Elwell <phil@raspberrypi.com>,
	Mike Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	linux-clk@vger.kernel.org, Philipp Zabel <p.zabel@pengutronix.de>,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v5 12/27] clk: bcm: rpi: Use CCF boundaries instead of rolling our own
Date: Mon, 15 Jun 2020 10:40:52 +0200
Message-ID: <d4c53dab6de5d5f70743d9c139d0117589530e62.1592210452.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.98f979c2af2337c57217016d21d7c68e1ac2ce8a.1592210452.git-series.maxime@cerno.tech>

The raspberrypi firmware clock driver has a min_rate / max_rate clamping by
storing the info it needs in a private structure.

However, the CCF already provides such a facility, so we can switch to it
to remove the boilerplate.

Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/bcm/clk-raspberrypi.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index a20492fade6a..e135ad28d38d 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -36,9 +36,6 @@ struct raspberrypi_clk {
 	struct rpi_firmware *firmware;
 	struct platform_device *cpufreq;
 
-	unsigned long min_rate;
-	unsigned long max_rate;
-
 	struct clk_hw pllb;
 };
 
@@ -142,13 +139,11 @@ static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
 					  struct clk_rate_request *req)
 {
-	struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
-						   pllb);
 	u64 div, final_rate;
 	u32 ndiv, fdiv;
 
 	/* We can't use req->rate directly as it would overflow */
-	final_rate = clamp(req->rate, rpi->min_rate, rpi->max_rate);
+	final_rate = clamp(req->rate, req->min_rate, req->max_rate);
 
 	div = (u64)final_rate << A2W_PLL_FRAC_BITS;
 	do_div(div, req->best_parent_rate);
@@ -215,12 +210,15 @@ static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
 	dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n",
 		 min_rate, max_rate);
 
-	rpi->min_rate = min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-	rpi->max_rate = max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-
 	rpi->pllb.init = &init;
 
-	return devm_clk_hw_register(rpi->dev, &rpi->pllb);
+	ret = devm_clk_hw_register(rpi->dev, &rpi->pllb);
+	if (!ret)
+		clk_hw_set_rate_range(&rpi->pllb,
+				      min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE,
+				      max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE);
+
+	return ret;
 }
 
 static struct clk_fixed_factor raspberrypi_clk_pllb_arm = {
-- 
git-series 0.9.1

  parent reply index

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-15  8:40 [PATCH v5 00/27] clk: bcm: rpi: Add support for BCM2711 firmware clocks Maxime Ripard
2020-06-15  8:40 ` [PATCH v5 01/27] dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 02/27] dt-bindings: clock: Add a binding for the RPi Firmware clocks Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 03/27] firmware: rpi: Only create clocks device if we don't have a node for it Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 04/27] clk: bcm: rpi: Allow the driver to be probed by DT Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 05/27] clk: bcm: rpi: Statically init clk_init_data Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 06/27] clk: bcm: rpi: Use clk_hw_register for pllb_arm Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 07/27] clk: bcm: rpi: Remove global pllb_arm clock pointer Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 08/27] clk: bcm: rpi: Make sure pllb_arm is removed Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 09/27] clk: bcm: rpi: Remove pllb_arm_lookup global pointer Maxime Ripard
2020-06-25  0:42   ` Stephen Boyd
2020-06-25  0:44   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 10/27] clk: bcm: rpi: Switch to clk_hw_register_clkdev Maxime Ripard
2020-06-25  0:44   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 11/27] clk: bcm: rpi: Make sure the clkdev lookup is removed Maxime Ripard
2020-06-25  0:44   ` Stephen Boyd
2020-06-15  8:40 ` Maxime Ripard [this message]
2020-06-25  0:44   ` [PATCH v5 12/27] clk: bcm: rpi: Use CCF boundaries instead of rolling our own Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 13/27] clk: bcm: rpi: Create a data structure for the clocks Maxime Ripard
2020-06-25  0:44   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 14/27] clk: bcm: rpi: Add clock id to data Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 15/27] clk: bcm: rpi: Pass the clocks data to the firmware function Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 16/27] clk: bcm: rpi: Rename is_prepared function Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 17/27] clk: bcm: rpi: Split pllb clock hooks Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 18/27] clk: bcm: rpi: Make the PLLB registration function return a clk_hw Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:40 ` [PATCH v5 19/27] clk: bcm: rpi: Add DT provider for the clocks Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 20/27] clk: bcm: rpi: Add an enum for the firmware clocks Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 21/27] clk: bcm: rpi: Discover " Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 22/27] clk: bcm: rpi: Give firmware clocks a name Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 23/27] Revert "clk: bcm2835: remove pllb" Maxime Ripard
2020-06-25  0:45   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 24/27] ARM: dts: bcm2711: Add firmware clocks node Maxime Ripard
2020-06-25  8:16   ` Nicolas Saenz Julienne
2020-06-15  8:41 ` [PATCH v5 25/27] clk: bcm2835: Allow custom CCF flags for the PLLs Maxime Ripard
2020-06-25  0:46   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 26/27] clk: bcm2835: Don't cache the PLLB rate Maxime Ripard
2020-06-25  0:46   ` Stephen Boyd
2020-06-15  8:41 ` [PATCH v5 27/27] clk: bcm: rpi: Remove the quirks for the CPU clock Maxime Ripard
2020-06-25  0:46   ` Stephen Boyd
2020-06-19  9:37 ` [PATCH v5 00/27] clk: bcm: rpi: Add support for BCM2711 firmware clocks Stephen Boyd
2020-06-19  9:44   ` Nicolas Saenz Julienne
2020-06-19 23:57     ` Stephen Boyd
2020-06-20  0:20       ` Stephen Boyd
2020-06-25  0:40         ` Stephen Boyd
2020-06-19 11:52   ` Maxime Ripard
2020-06-19 23:57     ` Stephen Boyd
2020-06-25  1:15 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d4c53dab6de5d5f70743d9c139d0117589530e62.1592210452.git-series.maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=p.zabel@pengutronix.de \
    --cc=phil@raspberrypi.com \
    --cc=sboyd@kernel.org \
    --cc=tim.gover@raspberrypi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git