Hi,

On Wed, Jun 21, 2023 at 05:35:09PM +0200, Thierry Reding wrote:
> On Tue, Jun 20, 2023 at 12:09:09PM -0700, Stephen Boyd wrote:
> > Quoting Maxime Ripard (2023-06-19 00:26:19)
> > > On Mon, Jun 19, 2023 at 02:38:59AM +0300, Dmitry Osipenko wrote:
> > > > 05.05.2023 14:26, Maxime Ripard пишет:
> > > > > 
> > > > > diff --git a/drivers/clk/tegra/clk-super.c b/drivers/clk/tegra/clk-super.c
> > > > > index 3f3a7a203c5f..7ec47942720c 100644
> > > > > --- a/drivers/clk/tegra/clk-super.c
> > > > > +++ b/drivers/clk/tegra/clk-super.c
> > > > > @@ -142,15 +142,22 @@ static const struct clk_ops tegra_clk_super_mux_ops = {
> > > > >     .restore_context = clk_super_mux_restore_context,
> > > > >  };
> > > > >  
> > > > > -static long clk_super_round_rate(struct clk_hw *hw, unsigned long rate,
> > > > > -                            unsigned long *parent_rate)
> > > > > +static int clk_super_determine_rate(struct clk_hw *hw,
> > > > > +                               struct clk_rate_request *req)
> > > > >  {
> > > > >     struct tegra_clk_super_mux *super = to_clk_super_mux(hw);
> > > > >     struct clk_hw *div_hw = &super->frac_div.hw;
> > > > > +   unsigned long rate;
> > > > >  
> > > > >     __clk_hw_set_clk(div_hw, hw);
> > > > >  
> > > > > -   return super->div_ops->round_rate(div_hw, rate, parent_rate);
> > > > > +   rate = super->div_ops->round_rate(div_hw, req->rate,
> > > > > +                                     &req->best_parent_rate);
> > > > > +   if (rate < 0)
> > 
> > There's the report that this condition is never possible. Maybe the
> > previous code was relying on an error value sometimes. Can we add
> > determine_rate to the div_ops and simplify this code? I asked on the
> > list for that earlier.
> 
> I was able to reproduce this on a Tegra30 Beaver, but the problem is
> more straightforward than this. The crash I was seeing during boot was
> because cclk_super_determine_rate() was still calling the round_rate()
> callback from tegra_clk_super_ops, which this patch removed (and added
> determine_rate() instead).
> 
> The following fixes the problem for me. It's basically converting the
> round_rate() call to an equivalent determine_rate() call.

Thanks for figuring it out :)

> Dmitry, can you verify that this fixes the issue that you were seeing?
> 
> Thierry
> 
> --- >8 ---
> diff --git a/drivers/clk/tegra/clk-tegra-super-cclk.c b/drivers/clk/tegra/clk-tegra-super-cclk.c
> index 68d7bcd5fc8a..8a2bb4ae4fd2 100644
> --- a/drivers/clk/tegra/clk-tegra-super-cclk.c
> +++ b/drivers/clk/tegra/clk-tegra-super-cclk.c
> @@ -86,9 +86,16 @@ static int cclk_super_determine_rate(struct clk_hw *hw,
>  	if (rate <= pllp_rate) {
>  		if (super->flags & TEGRA20_SUPER_CLK)
>  			rate = pllp_rate;
> -		else
> -			rate = tegra_clk_super_ops.round_rate(hw, rate,
> -							      &pllp_rate);
> +		else {
> +			struct clk_rate_request parent = {
> +				.rate = req->rate,
> +				.best_parent_rate = pllp_rate,
> +			};

If it works and you submit a patch later, this needs to be changed to
clk_hw_init_rate_request()

Maxime