linux-crypto.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: linux-crypto@vger.kernel.org, herbert@gondor.apana.org.au
Cc: linux-arm-kernel@lists.infradead.org,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH 05/10] crypto: arm64/aes-blk - remove cra_alignmask
Date: Tue, 17 Jan 2017 15:22:32 +0000	[thread overview]
Message-ID: <1484666557-31458-6-git-send-email-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <1484666557-31458-1-git-send-email-ard.biesheuvel@linaro.org>

Remove the unnecessary alignmask: it is much more efficient to deal with
the misalignment in the core algorithm than relying on the crypto API to
copy the data to a suitably aligned buffer.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
NOTE: this won't apply unless 'crypto: arm64/aes-blk - honour iv_out
requirement in CBC and CTR modes' is applied first, which was sent out
separately as a bugfix for v3.16 - v4.9

 arch/arm64/crypto/aes-glue.c  | 16 ++++++----------
 arch/arm64/crypto/aes-modes.S |  8 +++-----
 2 files changed, 9 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c
index 5164aaf82c6a..8ee1fb7aaa4f 100644
--- a/arch/arm64/crypto/aes-glue.c
+++ b/arch/arm64/crypto/aes-glue.c
@@ -215,14 +215,15 @@ static int ctr_encrypt(struct skcipher_request *req)
 		u8 *tsrc = walk.src.virt.addr;
 
 		/*
-		 * Minimum alignment is 8 bytes, so if nbytes is <= 8, we need
-		 * to tell aes_ctr_encrypt() to only read half a block.
+		 * Tell aes_ctr_encrypt() to process a tail block.
 		 */
-		blocks = (nbytes <= 8) ? -1 : 1;
+		blocks = -1;
 
-		aes_ctr_encrypt(tail, tsrc, (u8 *)ctx->key_enc, rounds,
+		aes_ctr_encrypt(tail, NULL, (u8 *)ctx->key_enc, rounds,
 				blocks, walk.iv, first);
-		memcpy(tdst, tail, nbytes);
+		if (tdst != tsrc)
+			memcpy(tdst, tsrc, nbytes);
+		crypto_xor(tdst, tail, nbytes);
 		err = skcipher_walk_done(&walk, 0);
 	}
 	kernel_neon_end();
@@ -282,7 +283,6 @@ static struct skcipher_alg aes_algs[] = { {
 		.cra_flags		= CRYPTO_ALG_INTERNAL,
 		.cra_blocksize		= AES_BLOCK_SIZE,
 		.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
-		.cra_alignmask		= 7,
 		.cra_module		= THIS_MODULE,
 	},
 	.min_keysize	= AES_MIN_KEY_SIZE,
@@ -298,7 +298,6 @@ static struct skcipher_alg aes_algs[] = { {
 		.cra_flags		= CRYPTO_ALG_INTERNAL,
 		.cra_blocksize		= AES_BLOCK_SIZE,
 		.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
-		.cra_alignmask		= 7,
 		.cra_module		= THIS_MODULE,
 	},
 	.min_keysize	= AES_MIN_KEY_SIZE,
@@ -315,7 +314,6 @@ static struct skcipher_alg aes_algs[] = { {
 		.cra_flags		= CRYPTO_ALG_INTERNAL,
 		.cra_blocksize		= 1,
 		.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
-		.cra_alignmask		= 7,
 		.cra_module		= THIS_MODULE,
 	},
 	.min_keysize	= AES_MIN_KEY_SIZE,
@@ -332,7 +330,6 @@ static struct skcipher_alg aes_algs[] = { {
 		.cra_priority		= PRIO - 1,
 		.cra_blocksize		= 1,
 		.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
-		.cra_alignmask		= 7,
 		.cra_module		= THIS_MODULE,
 	},
 	.min_keysize	= AES_MIN_KEY_SIZE,
@@ -350,7 +347,6 @@ static struct skcipher_alg aes_algs[] = { {
 		.cra_flags		= CRYPTO_ALG_INTERNAL,
 		.cra_blocksize		= AES_BLOCK_SIZE,
 		.cra_ctxsize		= sizeof(struct crypto_aes_xts_ctx),
-		.cra_alignmask		= 7,
 		.cra_module		= THIS_MODULE,
 	},
 	.min_keysize	= 2 * AES_MIN_KEY_SIZE,
diff --git a/arch/arm64/crypto/aes-modes.S b/arch/arm64/crypto/aes-modes.S
index 838dad5c209f..92b982a8b112 100644
--- a/arch/arm64/crypto/aes-modes.S
+++ b/arch/arm64/crypto/aes-modes.S
@@ -337,7 +337,7 @@ AES_ENTRY(aes_ctr_encrypt)
 
 .Lctrcarrydone:
 	subs		w4, w4, #1
-	bmi		.Lctrhalfblock		/* blocks < 0 means 1/2 block */
+	bmi		.Lctrtailblock		/* blocks <0 means tail block */
 	ld1		{v3.16b}, [x1], #16
 	eor		v3.16b, v0.16b, v3.16b
 	st1		{v3.16b}, [x0], #16
@@ -348,10 +348,8 @@ AES_ENTRY(aes_ctr_encrypt)
 	FRAME_POP
 	ret
 
-.Lctrhalfblock:
-	ld1		{v3.8b}, [x1]
-	eor		v3.8b, v0.8b, v3.8b
-	st1		{v3.8b}, [x0]
+.Lctrtailblock:
+	st1		{v0.16b}, [x0]
 	FRAME_POP
 	ret
 
-- 
2.7.4

  parent reply	other threads:[~2017-01-17 15:22 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-17 15:22 [PATCH 00/10] crypto - AES for ARM/arm64 updates for v4.11 (round #2) Ard Biesheuvel
2017-01-17 15:22 ` [PATCH 01/10] crypto: arm64/aes-neon-bs - honour iv_out requirement in CTR mode Ard Biesheuvel
2017-01-17 15:22 ` [PATCH 02/10] crypto: arm/aes-ce - remove cra_alignmask Ard Biesheuvel
2017-01-17 15:22 ` [PATCH 03/10] crypto: arm/chacha20 " Ard Biesheuvel
2017-01-17 15:22 ` [PATCH 04/10] crypto: arm64/aes-ce-ccm " Ard Biesheuvel
2017-01-17 15:22 ` Ard Biesheuvel [this message]
2017-01-17 15:22 ` [PATCH 06/10] crypto: arm64/chacha20 " Ard Biesheuvel
2017-01-17 15:22 ` [PATCH 07/10] crypto: arm64/aes - avoid literals for cross-module symbol references Ard Biesheuvel
2017-01-17 15:22 ` [PATCH 08/10] crypto: arm64/aes - performance tweak Ard Biesheuvel
2017-01-17 15:22 ` [PATCH 09/10] crypto: arm64/aes-neon-blk - tweak performance for low end cores Ard Biesheuvel
2017-01-17 15:22 ` [PATCH 10/10] crypto: arm64/aes - replace scalar fallback with plain NEON fallback Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1484666557-31458-6-git-send-email-ard.biesheuvel@linaro.org \
    --to=ard.biesheuvel@linaro.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --subject='Re: [PATCH 05/10] crypto: arm64/aes-blk - remove cra_alignmask' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).