From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vinod Koul Subject: Re: [PATCH 5/6] dmaengine: Add Broadcom SBA RAID driver Date: Sun, 5 Feb 2017 11:36:57 +0530 Message-ID: <20170205060657.GV19244@localhost> References: <1486010836-25228-1-git-send-email-anup.patel@broadcom.com> <1486010836-25228-6-git-send-email-anup.patel@broadcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: Rob Herring , Mark Rutland , Herbert Xu , "David S . Miller" , Jassi Brar , Dan Williams , Ray Jui , Scott Branden , Jon Mason , Rob Rice , bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org, dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-crypto-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-raid-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Anup Patel Return-path: Content-Disposition: inline In-Reply-To: <1486010836-25228-6-git-send-email-anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-crypto.vger.kernel.org On Thu, Feb 02, 2017 at 10:17:15AM +0530, Anup Patel wrote: > +config BCM_SBA_RAID > + tristate "Broadcom SBA RAID engine support" > + depends on (ARM64 && MAILBOX && RAID6_PQ) || COMPILE_TEST > + select DMA_ENGINE > + select DMA_ENGINE_RAID > + select ASYNC_TX_ENABLE_CHANNEL_SWITCH > + default ARCH_BCM_IPROC whats with the funny alignement? > +/* SBA command related defines */ > +#define SBA_TYPE_SHIFT 48 > +#define SBA_TYPE_MASK 0x3 > +#define SBA_TYPE_A 0x0 > +#define SBA_TYPE_B 0x2 > +#define SBA_TYPE_C 0x3 > +#define SBA_USER_DEF_SHIFT 32 > +#define SBA_USER_DEF_MASK 0xffff > +#define SBA_R_MDATA_SHIFT 24 > +#define SBA_R_MDATA_MASK 0xff > +#define SBA_C_MDATA_MS_SHIFT 18 > +#define SBA_C_MDATA_MS_MASK 0x3 > +#define SBA_INT_SHIFT 17 > +#define SBA_INT_MASK 0x1 > +#define SBA_RESP_SHIFT 16 > +#define SBA_RESP_MASK 0x1 > +#define SBA_C_MDATA_SHIFT 8 > +#define SBA_C_MDATA_MASK 0xff > +#define SBA_CMD_SHIFT 0 > +#define SBA_CMD_MASK 0xf > +#define SBA_CMD_ZERO_ALL_BUFFERS 0x8 > +#define SBA_CMD_LOAD_BUFFER 0x9 > +#define SBA_CMD_XOR 0xa > +#define SBA_CMD_GALOIS_XOR 0xb > +#define SBA_CMD_ZERO_BUFFER 0x4 > +#define SBA_CMD_WRITE_BUFFER 0xc Try using BIT and GENMAST for hardware descriptions > + > +/* SBA C_MDATA helper macros */ > +#define SBA_C_MDATA_LOAD_VAL(__bnum0) ((__bnum0) & 0x3) > +#define SBA_C_MDATA_WRITE_VAL(__bnum0) ((__bnum0) & 0x3) > +#define SBA_C_MDATA_XOR_VAL(__bnum1, __bnum0) \ > + ({ u32 __v = ((__bnum0) & 0x3); \ > + __v |= ((__bnum1) & 0x3) << 2; \ > + __v; \ > + }) > +#define SBA_C_MDATA_PQ_VAL(__dnum, __bnum1, __bnum0) \ > + ({ u32 __v = ((__bnum0) & 0x3); \ > + __v |= ((__bnum1) & 0x3) << 2; \ > + __v |= ((__dnum) & 0x1f) << 5; \ > + __v; \ > + }) ah why are we usig complex macros, why can't these be simple functions.. > +#define SBA_C_MDATA_LS(__c_mdata_val) ((__c_mdata_val) & 0xff) > +#define SBA_C_MDATA_MS(__c_mdata_val) (((__c_mdata_val) >> 8) & 0x3) > + > +/* Driver helper macros */ > +#define to_sba_request(tx) \ > + container_of(tx, struct sba_request, tx) > +#define to_sba_device(dchan) \ > + container_of(dchan, struct sba_device, dma_chan) > + > +enum sba_request_state { > + SBA_REQUEST_STATE_FREE = 1, > + SBA_REQUEST_STATE_ALLOCED = 2, > + SBA_REQUEST_STATE_PENDING = 3, > + SBA_REQUEST_STATE_ACTIVE = 4, > + SBA_REQUEST_STATE_COMPLETED = 5, > + SBA_REQUEST_STATE_ABORTED = 6, whats up with a very funny indentation setting, we use 8 chars. Please re-read the Documentation/process/coding-style.rst > +static int sba_alloc_chan_resources(struct dma_chan *dchan) > +{ > + /* > + * We only have one channel so we have pre-alloced > + * channel resources. Over here we just return number > + * of free request. > + */ > + return sba_free_request_count(to_sba_device(dchan)); > +} essentially you are not doing much, so you can skip it. Its an optional call. > +static void sba_free_chan_resources(struct dma_chan *dchan) > +{ > + /* > + * Channel resources are pre-alloced so we just free-up > + * whatever we can so that we can re-use pre-alloced > + * channel resources next time. > + */ > + sba_cleanup_inflight_requests(to_sba_device(dchan)); well this one checks for pending requests as well, which shouldn't be there when freeing a channel, something seems not quite right here.. > +static int sba_send_mbox_request(struct sba_device *sba, > + struct sba_request *req) > +{ > + int mchans_idx, ret = 0; > + > + /* Select mailbox channel in round-robin fashion */ > + mchans_idx = atomic_inc_return(&sba->mchans_current); > + mchans_idx = mchans_idx % sba->mchans_count; > + > + /* Send batch message for the request */ > + req->bmsg.batch.msgs_queued = 0; > + ret = mbox_send_message(sba->mchans[mchans_idx], &req->bmsg); > + if (ret < 0) { > + dev_info(sba->dev, "channel %d message %d (total %d)", > + mchans_idx, req->bmsg.batch.msgs_queued, > + req->bmsg.batch.msgs_count); dev_err? > + dev_err(sba->dev, "send message failed with error %d", ret); > + return ret; > + } > + ret = req->bmsg.error; > + if (ret < 0) { > + dev_info(sba->dev, > + "mbox channel %d message %d (total %d)", > + mchans_idx, req->bmsg.batch.msgs_queued, > + req->bmsg.batch.msgs_count); same here > +static dma_cookie_t sba_tx_submit(struct dma_async_tx_descriptor *tx) > +{ > + unsigned long flags; > + dma_cookie_t cookie; > + struct sba_request *req; > + struct sba_device *sba; > + > + if (unlikely(!tx)) > + return -EINVAL; > + > + sba = to_sba_device(tx->chan); > + req = to_sba_request(tx); > + > + /* Assign cookie and mark request pending */ > + spin_lock_irqsave(&sba->reqs_lock, flags); > + cookie = dma_cookie_assign(tx); > + _sba_pending_request(sba, req); > + spin_unlock_irqrestore(&sba->reqs_lock, flags); > + > + /* Try to submit pending request */ > + sba_issue_pending(&sba->dma_chan); Nope, thats wrong, caller needs to call .issue_pending for that > +static enum dma_status sba_tx_status(struct dma_chan *dchan, > + dma_cookie_t cookie, > + struct dma_tx_state *txstate) > +{ > + int mchan_idx; > + enum dma_status ret; > + struct sba_device *sba = to_sba_device(dchan); > + > + ret = dma_cookie_status(dchan, cookie, txstate); > + if (ret == DMA_COMPLETE) > + return ret; > + > + for (mchan_idx = 0; mchan_idx < sba->mchans_count; mchan_idx++) > + mbox_client_peek_data(sba->mchans[mchan_idx]); what is this achieving? > +static struct dma_async_tx_descriptor * > +sba_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst, dma_addr_t src, > + size_t len, unsigned long flags) > +{ > + size_t msg_len; > + dma_addr_t msg_offset = 0; > + unsigned int msgs_count = 0, cmds_count, cmds_idx = 0; > + struct sba_device *sba = to_sba_device(dchan); > + struct sba_request *req = NULL; > + > + /* Sanity checks */ > + if (unlikely(len > sba->req_size)) > + return NULL; why is that an error, you can create multiple txn of max length > +static int sba_async_register(struct sba_device *sba) > +{ > + int ret; > + struct dma_device *dma_dev = &sba->dma_dev; > + > + /* Initialize DMA channel cookie */ > + sba->dma_chan.device = dma_dev; > + dma_cookie_init(&sba->dma_chan); > + > + /* Initialize DMA device capability mask */ > + dma_cap_zero(dma_dev->cap_mask); > + dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask); > + dma_cap_set(DMA_XOR, dma_dev->cap_mask); > + dma_cap_set(DMA_PQ, dma_dev->cap_mask); > + > + /* > + * Set mailbox channel device as the base device of > + * our dma_device because the actual memory accesses > + * will be done by mailbox controller > + */ > + dma_dev->dev = sba->mbox_dev; > + > + /* Set base prep routines */ > + dma_dev->device_alloc_chan_resources = sba_alloc_chan_resources; > + dma_dev->device_free_chan_resources = sba_free_chan_resources; > + dma_dev->device_issue_pending = sba_issue_pending; > + dma_dev->device_tx_status = sba_tx_status; Please add terminate callback support, also add the capabilities, we need to advertise that and use in clients Also you can simplify bunch of code by using virt-chan support for managing channels and descriptors -- ~Vinod -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html