linux-crypto.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Radu Solea <radu.solea@nxp.com>,
	Franck LENORMAND <franck.lenormand@nxp.com>,
	Leonard Crestez <leonard.crestez@nxp.com>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	Sasha Levin <sashal@kernel.org>,
	linux-crypto@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 131/209] crypto: mxs-dcp - Fix AES issues
Date: Tue, 12 Nov 2019 20:49:07 -0500	[thread overview]
Message-ID: <20191113015025.9685-131-sashal@kernel.org> (raw)
In-Reply-To: <20191113015025.9685-1-sashal@kernel.org>

From: Radu Solea <radu.solea@nxp.com>

[ Upstream commit fadd7a6e616b89c7f4f7bfa7b824f290bab32c3c ]

The DCP driver does not obey cryptlen, when doing android CTS this
results in passing to hardware input stream lengths which are not
multiple of block size.

Add a check to prevent future erroneous stream lengths from reaching the
hardware and adjust the scatterlist walking code to obey cryptlen.

Also properly copy-out the IV for chaining.

Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/mxs-dcp.c | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index 3425ccc012168..b926098f70ffd 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -225,6 +225,12 @@ static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
 	dma_addr_t dst_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_out_buf,
 					     DCP_BUF_SZ, DMA_FROM_DEVICE);
 
+	if (actx->fill % AES_BLOCK_SIZE) {
+		dev_err(sdcp->dev, "Invalid block size!\n");
+		ret = -EINVAL;
+		goto aes_done_run;
+	}
+
 	/* Fill in the DMA descriptor. */
 	desc->control0 = MXS_DCP_CONTROL0_DECR_SEMAPHORE |
 		    MXS_DCP_CONTROL0_INTERRUPT |
@@ -254,6 +260,7 @@ static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
 
 	ret = mxs_dcp_start_dma(actx);
 
+aes_done_run:
 	dma_unmap_single(sdcp->dev, key_phys, 2 * AES_KEYSIZE_128,
 			 DMA_TO_DEVICE);
 	dma_unmap_single(sdcp->dev, src_phys, DCP_BUF_SZ, DMA_TO_DEVICE);
@@ -280,13 +287,15 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 
 	uint8_t *out_tmp, *src_buf, *dst_buf = NULL;
 	uint32_t dst_off = 0;
+	uint32_t last_out_len = 0;
 
 	uint8_t *key = sdcp->coh->aes_key;
 
 	int ret = 0;
 	int split = 0;
-	unsigned int i, len, clen, rem = 0;
+	unsigned int i, len, clen, rem = 0, tlen = 0;
 	int init = 0;
+	bool limit_hit = false;
 
 	actx->fill = 0;
 
@@ -305,6 +314,11 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 	for_each_sg(req->src, src, nents, i) {
 		src_buf = sg_virt(src);
 		len = sg_dma_len(src);
+		tlen += len;
+		limit_hit = tlen > req->nbytes;
+
+		if (limit_hit)
+			len = req->nbytes - (tlen - len);
 
 		do {
 			if (actx->fill + len > out_off)
@@ -321,13 +335,15 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 			 * If we filled the buffer or this is the last SG,
 			 * submit the buffer.
 			 */
-			if (actx->fill == out_off || sg_is_last(src)) {
+			if (actx->fill == out_off || sg_is_last(src) ||
+				limit_hit) {
 				ret = mxs_dcp_run_aes(actx, req, init);
 				if (ret)
 					return ret;
 				init = 0;
 
 				out_tmp = out_buf;
+				last_out_len = actx->fill;
 				while (dst && actx->fill) {
 					if (!split) {
 						dst_buf = sg_virt(dst);
@@ -350,6 +366,19 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 				}
 			}
 		} while (len);
+
+		if (limit_hit)
+			break;
+	}
+
+	/* Copy the IV for CBC for chaining */
+	if (!rctx->ecb) {
+		if (rctx->enc)
+			memcpy(req->info, out_buf+(last_out_len-AES_BLOCK_SIZE),
+				AES_BLOCK_SIZE);
+		else
+			memcpy(req->info, in_buf+(last_out_len-AES_BLOCK_SIZE),
+				AES_BLOCK_SIZE);
 	}
 
 	return ret;
-- 
2.20.1


      parent reply	other threads:[~2019-11-13  2:21 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20191113015025.9685-1-sashal@kernel.org>
2019-11-13  1:49 ` [PATCH AUTOSEL 4.19 130/209] crypto: mxs-dcp - Fix SHA null hashes and output length Sasha Levin
2019-11-13  1:49 ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191113015025.9685-131-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=franck.lenormand@nxp.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=radu.solea@nxp.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).