linux-crypto.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "André Draszik" <git@andred.net>
To: linux-kernel@vger.kernel.org
Cc: "André Draszik" <git@andred.net>,
	"Horia Geantă" <horia.geanta@nxp.com>,
	"Aymen Sghaier" <aymen.sghaier@nxp.com>,
	"Herbert Xu" <herbert@gondor.apana.org.au>,
	"David S. Miller" <davem@davemloft.net>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
	"Anson Huang" <Anson.Huang@nxp.com>,
	"Robin Gong" <yibin.gong@nxp.com>,
	linux-crypto@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-input@vger.kernel.org
Subject: [PATCH v2 5/6] Input: snvs_pwrkey - enable snvs clock as needed
Date: Tue, 25 Feb 2020 16:12:00 +0000	[thread overview]
Message-ID: <20200225161201.1975-5-git@andred.net> (raw)
In-Reply-To: <20200225161201.1975-1-git@andred.net>

At the moment, enabling this driver without the SNVS RTC driver
being active will hang the kernel as soon as the power button
is pressed.

The reason is that in that case the SNVS isn't enabled, and
any attempt to read the SNVS registers will simply hang forever.

Ensure the clock is enabled (during the interrupt handler) to
make this driver work.

Also see commit 7f8993995410 ("drivers/rtc/rtc-snvs: add clock support")
and commit edb190cb1734
("rtc: snvs: make sure clock is enabled for interrupt handle")
for similar updates to the snvs rtc driver.

Signed-off-by: André Draszik <git@andred.net>
Cc: "Horia Geantă" <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Robin Gong <yibin.gong@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org

---
v2:
* drop redundant tests and simplify error handling by using
  devm_clk_get_optional()
* add clock handling to imx_imx_snvs_check_for_events()
---
 drivers/input/keyboard/snvs_pwrkey.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
index 2f5e3ab5ed63..382d2ae82c9b 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -16,6 +16,7 @@
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/pm_wakeirq.h>
+#include <linux/clk.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
@@ -38,6 +39,7 @@ struct pwrkey_drv_data {
 	int wakeup;
 	struct timer_list check_timer;
 	struct input_dev *input;
+	struct clk *clk;
 	u8 minor_rev;
 };
 
@@ -47,7 +49,10 @@ static void imx_imx_snvs_check_for_events(struct timer_list *t)
 	struct input_dev *input = pdata->input;
 	u32 state;
 
+	clk_enable(pdata->clk);
 	regmap_read(pdata->snvs, SNVS_HPSR_REG, &state);
+	clk_disable(pdata->clk);
+
 	state = state & SNVS_HPSR_BTN ? 1 : 0;
 
 	/* only report new event if status changed */
@@ -74,11 +79,13 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
 
 	pm_wakeup_event(input->dev.parent, 0);
 
+	clk_enable(pdata->clk);
+
 	regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
 	if (lp_status & SNVS_LPSR_SPO) {
 		if (pdata->minor_rev == 0) {
 			/*
-			 * The first generation i.MX6 SoCs only sends an
+			 * The first generation i.MX[6|7] SoCs only send an
 			 * interrupt on button release. To mimic power-key
 			 * usage, we'll prepend a press event.
 			 */
@@ -96,6 +103,8 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
 	/* clear SPO status */
 	regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
 
+	clk_disable(pdata->clk);
+
 	return IRQ_HANDLED;
 }
 
@@ -140,6 +149,23 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 	if (pdata->irq < 0)
 		return -EINVAL;
 
+	pdata->clk = devm_clk_get_optional(&pdev->dev, "snvs-pwrkey");
+	if (IS_ERR(pdata->clk))
+		return PTR_ERR(pdata->clk);
+
+	error = clk_prepare(pdata->clk);
+	if (error) {
+		dev_err(&pdev->dev, "failed to prepare the snvs clock\n");
+		return error;
+	}
+	error = devm_add_action_or_reset(&pdev->dev,
+			(void(*)(void *))clk_unprepare,
+			pdata->clk);
+	if (error) {
+		dev_err(&pdev->dev, "failed to add reset action on 'snvs-pwrkey'");
+		return error;
+	}
+
 	regmap_read(pdata->snvs, SNVS_HPVIDR1_REG, &vid);
 	pdata->minor_rev = vid & 0xff;
 
-- 
2.23.0.rc1


  parent reply	other threads:[~2020-02-25 16:12 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-25 16:11 [PATCH v2 1/6] dt-bindings: crypto: fsl-sec4: add snvs clock to pwrkey André Draszik
2020-02-25 16:11 ` [PATCH v2 2/6] ARM: dts: imx7s: " André Draszik
2020-03-11  6:43   ` Shawn Guo
2020-02-25 16:11 ` [PATCH v2 3/6] arm64: dts: imx8mm: " André Draszik
2020-03-11  6:47   ` Shawn Guo
2020-02-25 16:11 ` [PATCH v2 4/6] arm64: dts: imx8mq: " André Draszik
2020-03-11  6:47   ` Shawn Guo
2020-02-25 16:12 ` André Draszik [this message]
2020-02-25 16:12 ` [PATCH v2 6/6] Input: snvs_pwrkey - only IRQ_HANDLED for our own events André Draszik
2020-02-26  1:15   ` Robin Gong
2020-02-26 17:23     ` André Draszik
2020-02-29 10:05       ` Robin Gong
2020-03-02  9:22   ` Horia Geanta
2020-03-28  3:43     ` Adam Ford
2020-04-01  8:58       ` Horia Geantă
2020-04-15 16:57         ` Horia Geantă
2020-03-02  8:17 ` [PATCH v2 1/6] dt-bindings: crypto: fsl-sec4: add snvs clock to pwrkey Horia Geanta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200225161201.1975-5-git@andred.net \
    --to=git@andred.net \
    --cc=Anson.Huang@nxp.com \
    --cc=aymen.sghaier@nxp.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=festevam@gmail.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=horia.geanta@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=yibin.gong@nxp.com \
    --subject='Re: [PATCH v2 5/6] Input: snvs_pwrkey - enable snvs clock as needed' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).