[PATCH 03/16] x86: remove always-defined CONFIG_AS_CFI

From: Masahiro Yamada <masahiroy@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: "David S . Miller" <davem@davemloft.net>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Kees Cook <keescook@chromium.org>,
	clang-built-linux@googlegroups.com,
	Herbert Xu <herbert@gondor.apana.org.au>,
	linux-crypto@vger.kernel.org, Ingo Molnar <mingo@redhat.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Borislav Petkov <bp@alien8.de>,
	Peter Zijlstra <peterz@infradead.org>,
	"H . Peter Anvin" <hpa@zytor.com>,
	x86@kernel.org, linux-kbuild@vger.kernel.org,
	Masahiro Yamada <masahiroy@kernel.org>
Subject: [PATCH 03/16] x86: remove always-defined CONFIG_AS_CFI
Date: Tue, 24 Mar 2020 17:48:08 +0900	[thread overview]
Message-ID: <20200324084821.29944-4-masahiroy@kernel.org> (raw)
In-Reply-To: <20200324084821.29944-1-masahiroy@kernel.org>

CONFIG_AS_CFI was introduced by commit e2414910f212 ("[PATCH] x86:
Detect CFI support in the assembler at runtime"), and extended by
commit f0f12d85af85 ("x86_64: Check for .cfi_rel_offset in CFI probe").

We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35e5ff ("kbuild: Raise the minimum
required binutils version to 2.21").

I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.

Remove CONFIG_AS_CFI, which is always defined.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
---

If this series is applied,
we can hard-code the assembler code, and delete CFI_* macros entirely.


 arch/x86/Makefile             | 10 ++--------
 arch/x86/include/asm/dwarf2.h | 36 -----------------------------------
 2 files changed, 2 insertions(+), 44 deletions(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 513a55562d75..72f8f744ebd7 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -177,12 +177,6 @@ ifeq ($(ACCUMULATE_OUTGOING_ARGS), 1)
 	KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args,)
 endif
 
-# Stackpointer is addressed different for 32 bit and 64 bit x86
-sp-$(CONFIG_X86_32) := esp
-sp-$(CONFIG_X86_64) := rsp
-
-# do binutils support CFI?
-cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
 # is .cfi_signal_frame supported too?
 cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
 cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
@@ -196,8 +190,8 @@ sha1_ni_instr :=$(call as-instr,sha1msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA1_NI=
 sha256_ni_instr :=$(call as-instr,sha256msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA256_NI=1)
 adx_instr := $(call as-instr,adox %r10$(comma)%r10,-DCONFIG_AS_ADX=1)
 
-KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) $(adx_instr)
-KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) $(adx_instr)
+KBUILD_AFLAGS += $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) $(adx_instr)
+KBUILD_CFLAGS += $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) $(adx_instr)
 
 KBUILD_LDFLAGS := -m elf_$(UTS_MACHINE)
 
diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
index 5a0502212bc5..90807583cad7 100644
--- a/arch/x86/include/asm/dwarf2.h
+++ b/arch/x86/include/asm/dwarf2.h
@@ -6,15 +6,6 @@
 #warning "asm/dwarf2.h should be only included in pure assembly files"
 #endif
 
-/*
- * Macros for dwarf2 CFI unwind table entries.
- * See "as.info" for details on these pseudo ops. Unfortunately
- * they are only supported in very new binutils, so define them
- * away for older version.
- */
-
-#ifdef CONFIG_AS_CFI
-
 #define CFI_STARTPROC		.cfi_startproc
 #define CFI_ENDPROC		.cfi_endproc
 #define CFI_DEF_CFA		.cfi_def_cfa
@@ -55,31 +46,4 @@
 #endif
 #endif
 
-#else
-
-/*
- * Due to the structure of pre-exisiting code, don't use assembler line
- * comment character # to ignore the arguments. Instead, use a dummy macro.
- */
-.macro cfi_ignore a=0, b=0, c=0, d=0
-.endm
-
-#define CFI_STARTPROC		cfi_ignore
-#define CFI_ENDPROC		cfi_ignore
-#define CFI_DEF_CFA		cfi_ignore
-#define CFI_DEF_CFA_REGISTER	cfi_ignore
-#define CFI_DEF_CFA_OFFSET	cfi_ignore
-#define CFI_ADJUST_CFA_OFFSET	cfi_ignore
-#define CFI_OFFSET		cfi_ignore
-#define CFI_REL_OFFSET		cfi_ignore
-#define CFI_REGISTER		cfi_ignore
-#define CFI_RESTORE		cfi_ignore
-#define CFI_REMEMBER_STATE	cfi_ignore
-#define CFI_RESTORE_STATE	cfi_ignore
-#define CFI_UNDEFINED		cfi_ignore
-#define CFI_ESCAPE		cfi_ignore
-#define CFI_SIGNAL_FRAME	cfi_ignore
-
-#endif
-
 #endif /* _ASM_X86_DWARF2_H */
-- 
2.17.1

