linux-crypto.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nicolas Toromanoff <nicolas.toromanoff@st.com>
To: Herbert Xu <herbert@gondor.apana.org.au>,
	"David S . Miller" <davem@davemloft.net>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>
Cc: Nicolas Toromanoff <nicolas.toromanoff@st.com>,
	<linux-crypto@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH 1/5] crypto: stm32/crc: fix ext4 chksum BUG_ON()
Date: Tue, 12 May 2020 16:11:09 +0200	[thread overview]
Message-ID: <20200512141113.18972-2-nicolas.toromanoff@st.com> (raw)
In-Reply-To: <20200512141113.18972-1-nicolas.toromanoff@st.com>

Allow use of crc_update without prior call to crc_init.
And change (and fix) driver to use CRC device even on unaligned buffers.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
---
 drivers/crypto/stm32/stm32-crc32.c | 98 +++++++++++++++---------------
 1 file changed, 48 insertions(+), 50 deletions(-)

diff --git a/drivers/crypto/stm32/stm32-crc32.c b/drivers/crypto/stm32/stm32-crc32.c
index 8e92e4ac79f1..c6156bf6c603 100644
--- a/drivers/crypto/stm32/stm32-crc32.c
+++ b/drivers/crypto/stm32/stm32-crc32.c
@@ -28,8 +28,10 @@
 
 /* Registers values */
 #define CRC_CR_RESET            BIT(0)
-#define CRC_CR_REVERSE          (BIT(7) | BIT(6) | BIT(5))
 #define CRC_INIT_DEFAULT        0xFFFFFFFF
+#define CRC_CR_REV_IN_WORD      (BIT(6) | BIT(5))
+#define CRC_CR_REV_IN_BYTE      BIT(5)
+#define CRC_CR_REV_OUT          BIT(7)
 
 #define CRC_AUTOSUSPEND_DELAY	50
 
@@ -38,8 +40,6 @@ struct stm32_crc {
 	struct device    *dev;
 	void __iomem     *regs;
 	struct clk       *clk;
-	u8               pending_data[sizeof(u32)];
-	size_t           nb_pending_bytes;
 };
 
 struct stm32_crc_list {
@@ -59,7 +59,6 @@ struct stm32_crc_ctx {
 
 struct stm32_crc_desc_ctx {
 	u32    partial; /* crc32c: partial in first 4 bytes of that struct */
-	struct stm32_crc *crc;
 };
 
 static int stm32_crc32_cra_init(struct crypto_tfm *tfm)
@@ -99,25 +98,22 @@ static int stm32_crc_init(struct shash_desc *desc)
 	struct stm32_crc *crc;
 
 	spin_lock_bh(&crc_list.lock);
-	list_for_each_entry(crc, &crc_list.dev_list, list) {
-		ctx->crc = crc;
-		break;
-	}
+	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
 	spin_unlock_bh(&crc_list.lock);
 
-	pm_runtime_get_sync(ctx->crc->dev);
+	pm_runtime_get_sync(crc->dev);
 
 	/* Reset, set key, poly and configure in bit reverse mode */
-	writel_relaxed(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
-	writel_relaxed(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
-	writel_relaxed(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
+	writel_relaxed(bitrev32(mctx->key), crc->regs + CRC_INIT);
+	writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL);
+	writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT,
+		       crc->regs + CRC_CR);
 
 	/* Store partial result */
-	ctx->partial = readl_relaxed(ctx->crc->regs + CRC_DR);
-	ctx->crc->nb_pending_bytes = 0;
+	ctx->partial = readl_relaxed(crc->regs + CRC_DR);
 
-	pm_runtime_mark_last_busy(ctx->crc->dev);
-	pm_runtime_put_autosuspend(ctx->crc->dev);
+	pm_runtime_mark_last_busy(crc->dev);
+	pm_runtime_put_autosuspend(crc->dev);
 
 	return 0;
 }
@@ -126,31 +122,49 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 			    unsigned int length)
 {
 	struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc);
-	struct stm32_crc *crc = ctx->crc;
-	u32 *d32;
-	unsigned int i;
+	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
+	struct stm32_crc *crc;
+
+	spin_lock_bh(&crc_list.lock);
+	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
+	spin_unlock_bh(&crc_list.lock);
 
 	pm_runtime_get_sync(crc->dev);
 
-	if (unlikely(crc->nb_pending_bytes)) {
-		while (crc->nb_pending_bytes != sizeof(u32) && length) {
-			/* Fill in pending data */
-			crc->pending_data[crc->nb_pending_bytes++] = *(d8++);
+	/*
+	 * Restore previously calculated CRC for this context as init value
+	 * Restore polynomial configuration
+	 * Configure in register for word input data,
+	 * Configure out register in reversed bit mode data.
+	 */
+	writel_relaxed(bitrev32(ctx->partial), crc->regs + CRC_INIT);
+	writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL);
+	writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT,
+		       crc->regs + CRC_CR);
+
+	if (d8 != PTR_ALIGN(d8, sizeof(u32))) {
+		/* Configure for byte data */
+		writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT,
+			       crc->regs + CRC_CR);
+		while (d8 != PTR_ALIGN(d8, sizeof(u32)) && length) {
+			writeb_relaxed(*d8++, crc->regs + CRC_DR);
 			length--;
 		}
-
-		if (crc->nb_pending_bytes == sizeof(u32)) {
-			/* Process completed pending data */
-			writel_relaxed(*(u32 *)crc->pending_data,
-				       crc->regs + CRC_DR);
-			crc->nb_pending_bytes = 0;
-		}
+		/* Configure for word data */
+		writel_relaxed(CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT,
+			       crc->regs + CRC_CR);
 	}
 
-	d32 = (u32 *)d8;
-	for (i = 0; i < length >> 2; i++)
-		/* Process 32 bits data */
-		writel_relaxed(*(d32++), crc->regs + CRC_DR);
+	for (; length >= sizeof(u32); d8 += sizeof(u32), length -= sizeof(u32))
+		writel_relaxed(*((u32 *)d8), crc->regs + CRC_DR);
+
+	if (length) {
+		/* Configure for byte data */
+		writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT,
+			       crc->regs + CRC_CR);
+		while (length--)
+			writeb_relaxed(*d8++, crc->regs + CRC_DR);
+	}
 
 	/* Store partial result */
 	ctx->partial = readl_relaxed(crc->regs + CRC_DR);
@@ -158,22 +172,6 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 	pm_runtime_mark_last_busy(crc->dev);
 	pm_runtime_put_autosuspend(crc->dev);
 
-	/* Check for pending data (non 32 bits) */
-	length &= 3;
-	if (likely(!length))
-		return 0;
-
-	if ((crc->nb_pending_bytes + length) >= sizeof(u32)) {
-		/* Shall not happen */
-		dev_err(crc->dev, "Pending data overflow\n");
-		return -EINVAL;
-	}
-
-	d8 = (const u8 *)d32;
-	for (i = 0; i < length; i++)
-		/* Store pending data */
-		crc->pending_data[crc->nb_pending_bytes++] = *(d8++);
-
 	return 0;
 }
 
-- 
2.17.1


  reply	other threads:[~2020-05-12 14:13 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-12 14:11 [PATCH 0/5] STM32 CRC update Nicolas Toromanoff
2020-05-12 14:11 ` Nicolas Toromanoff [this message]
2020-05-12 14:11 ` [PATCH 2/5] crypto: stm32/crc: fix run-time self test issue Nicolas Toromanoff
2020-05-12 14:11 ` [PATCH 3/5] crypto: stm32/crc: fix multi-instance Nicolas Toromanoff
2020-05-12 14:11 ` [PATCH 4/5] crypto: stm32/crc: don't sleep in runtime pm Nicolas Toromanoff
2020-05-12 14:11 ` [PATCH 5/5] crypto: stm32/crc: protect from concurrent accesses Nicolas Toromanoff
2020-05-22 16:11   ` Ard Biesheuvel
2020-05-25  7:24     ` Nicolas TOROMANOFF
2020-05-25  7:46       ` Ard Biesheuvel
2020-05-25  9:01         ` Nicolas TOROMANOFF
2020-05-25  9:07           ` Ard Biesheuvel
2020-05-25 11:49             ` Nicolas TOROMANOFF
2020-05-25 12:01               ` Ard Biesheuvel
2020-05-22 14:13 ` [PATCH 0/5] STM32 CRC update Herbert Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200512141113.18972-2-nicolas.toromanoff@st.com \
    --to=nicolas.toromanoff@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=davem@davemloft.net \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).