Linux-Crypto Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] crypto: qat - add delay before polling mailbox
@ 2020-07-30 12:27 Giovanni Cabiddu
  0 siblings, 0 replies; only message in thread
From: Giovanni Cabiddu @ 2020-07-30 12:27 UTC (permalink / raw)
  To: herbert; +Cc: linux-crypto, qat-linux, Giovanni Cabiddu

The mailbox CSR register has a write latency and requires a delay before
being read. This patch replaces readl_poll_timeout with read_poll_timeout
that allows to sleep before read.
The initial sleep was removed when the mailbox poll loop was replaced with
readl_poll_timeout.

Fixes: a79d471c6510 ("crypto: qat - update timeout logic in put admin msg")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
---
 drivers/crypto/qat/qat_common/adf_admin.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/qat/qat_common/adf_admin.c b/drivers/crypto/qat/qat_common/adf_admin.c
index 1c8ca151a963..ec9b390276d6 100644
--- a/drivers/crypto/qat/qat_common/adf_admin.c
+++ b/drivers/crypto/qat/qat_common/adf_admin.c
@@ -131,9 +131,10 @@ static int adf_put_admin_msg_sync(struct adf_accel_dev *accel_dev, u32 ae,
 	memcpy(admin->virt_addr + offset, in, ADF_ADMINMSG_LEN);
 	ADF_CSR_WR(mailbox, mb_offset, 1);
 
-	ret = readl_poll_timeout(mailbox + mb_offset, status,
-				 status == 0, ADF_ADMIN_POLL_DELAY_US,
-				 ADF_ADMIN_POLL_TIMEOUT_US);
+	ret = read_poll_timeout(ADF_CSR_RD, status, status == 0,
+				ADF_ADMIN_POLL_DELAY_US,
+				ADF_ADMIN_POLL_TIMEOUT_US, true,
+				mailbox, mb_offset);
 	if (ret < 0) {
 		/* Response timeout */
 		dev_err(&GET_DEV(accel_dev),
-- 
2.26.2


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-30 12:27 [PATCH] crypto: qat - add delay before polling mailbox Giovanni Cabiddu

Linux-Crypto Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-crypto/0 linux-crypto/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-crypto linux-crypto/ https://lore.kernel.org/linux-crypto \
		linux-crypto@vger.kernel.org
	public-inbox-index linux-crypto

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-crypto


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git