From: zhenwei pi <pizhenwei@bytedance.com>
To: arei.gonglei@huawei.com
Cc: qemu-devel@nongnu.org, berrange@redhat.com, mst@redhat.com,
virtualization@lists.linux-foundation.org,
linux-crypto@vger.kernel.org, helei.sig11@bytedance.com,
jasowang@redhat.com, cohuck@redhat.com
Subject: PING: [PATCH v5 9/9] crypto: Introduce RSA algorithm
Date: Mon, 9 May 2022 10:17:11 +0800 [thread overview]
Message-ID: <57cb6d3f-e1bc-7e07-dd27-a3dfc83ae6c4@bytedance.com> (raw)
In-Reply-To: <20220428135943.178254-10-pizhenwei@bytedance.com>
Hi, Lei
I would appreciate it if you could review this patch!
On 4/28/22 21:59, zhenwei pi wrote:
> There are two parts in this patch:
> 1, support akcipher service by cryptodev-builtin driver
> 2, virtio-crypto driver supports akcipher service
>
> In principle, we should separate this into two patches, to avoid
> compiling error, merge them into one.
>
> Then virtio-crypto gets request from guest side, and forwards the
> request to builtin driver to handle it.
>
> Test with a guest linux:
> 1, The self-test framework of crypto layer works fine in guest kernel
> 2, Test with Linux guest(with asym support), the following script
> test(note that pkey_XXX is supported only in a newer version of keyutils):
> - both public key & private key
> - create/close session
> - encrypt/decrypt/sign/verify basic driver operation
> - also test with kernel crypto layer(pkey add/query)
>
> All the cases work fine.
>
> Run script in guest:
> rm -rf *.der *.pem *.pfx
> modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
> rm -rf /tmp/data
> dd if=/dev/random of=/tmp/data count=1 bs=20
>
> openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org"
> openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
> openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der
>
> PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
> echo "priv key id = "$PRIV_KEY_ID
> PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
> echo "pub key id = "$PUB_KEY_ID
>
> keyctl pkey_query $PRIV_KEY_ID 0
> keyctl pkey_query $PUB_KEY_ID 0
>
> echo "Enc with priv key..."
> keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv
> echo "Dec with pub key..."
> keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec
> cmp /tmp/data /tmp/dec
>
> echo "Sign with priv key..."
> keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig
> echo "Verify with pub key..."
> keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
>
> echo "Enc with pub key..."
> keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
> echo "Dec with priv key..."
> keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec
> cmp /tmp/data /tmp/dec
>
> echo "Verify with pub key..."
> keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
>
> Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
> Signed-off-by: lei he <helei.sig11@bytedance.com
> ---
> backends/cryptodev-builtin.c | 272 +++++++++++++++++++++----
> backends/cryptodev-vhost-user.c | 34 +++-
> backends/cryptodev.c | 32 ++-
> hw/virtio/virtio-crypto.c | 323 ++++++++++++++++++++++++------
> include/hw/virtio/virtio-crypto.h | 5 +-
> include/sysemu/cryptodev.h | 83 ++++++--
> 6 files changed, 604 insertions(+), 145 deletions(-)
>
> diff --git a/backends/cryptodev-builtin.c b/backends/cryptodev-builtin.c
> index 0671bf9f3e..388aedd8df 100644
> --- a/backends/cryptodev-builtin.c
> +++ b/backends/cryptodev-builtin.c
> @@ -26,6 +26,7 @@
> #include "qapi/error.h"
> #include "standard-headers/linux/virtio_crypto.h"
> #include "crypto/cipher.h"
> +#include "crypto/akcipher.h"
> #include "qom/object.h"
>
>
> @@ -41,11 +42,12 @@ OBJECT_DECLARE_SIMPLE_TYPE(CryptoDevBackendBuiltin, CRYPTODEV_BACKEND_BUILTIN)
> typedef struct CryptoDevBackendBuiltinSession {
> QCryptoCipher *cipher;
> uint8_t direction; /* encryption or decryption */
> - uint8_t type; /* cipher? hash? aead? */
> + uint8_t type; /* cipher? hash? aead? akcipher? */
> + QCryptoAkCipher *akcipher;
> QTAILQ_ENTRY(CryptoDevBackendBuiltinSession) next;
> } CryptoDevBackendBuiltinSession;
>
> -/* Max number of symmetric sessions */
> +/* Max number of symmetric/asymmetric sessions */
> #define MAX_NUM_SESSIONS 256
>
> #define CRYPTODEV_BUITLIN_MAX_AUTH_KEY_LEN 512
> @@ -80,15 +82,17 @@ static void cryptodev_builtin_init(
> backend->conf.crypto_services =
> 1u << VIRTIO_CRYPTO_SERVICE_CIPHER |
> 1u << VIRTIO_CRYPTO_SERVICE_HASH |
> - 1u << VIRTIO_CRYPTO_SERVICE_MAC;
> + 1u << VIRTIO_CRYPTO_SERVICE_MAC |
> + 1u << VIRTIO_CRYPTO_SERVICE_AKCIPHER;
> backend->conf.cipher_algo_l = 1u << VIRTIO_CRYPTO_CIPHER_AES_CBC;
> backend->conf.hash_algo = 1u << VIRTIO_CRYPTO_HASH_SHA1;
> + backend->conf.akcipher_algo = 1u << VIRTIO_CRYPTO_AKCIPHER_RSA;
> /*
> * Set the Maximum length of crypto request.
> * Why this value? Just avoid to overflow when
> * memory allocation for each crypto request.
> */
> - backend->conf.max_size = LONG_MAX - sizeof(CryptoDevBackendSymOpInfo);
> + backend->conf.max_size = LONG_MAX - sizeof(CryptoDevBackendOpInfo);
> backend->conf.max_cipher_key_len = CRYPTODEV_BUITLIN_MAX_CIPHER_KEY_LEN;
> backend->conf.max_auth_key_len = CRYPTODEV_BUITLIN_MAX_AUTH_KEY_LEN;
>
> @@ -148,6 +152,53 @@ err:
> return -1;
> }
>
> +static int cryptodev_builtin_get_rsa_hash_algo(
> + int virtio_rsa_hash, Error **errp)
> +{
> + switch (virtio_rsa_hash) {
> + case VIRTIO_CRYPTO_RSA_MD5:
> + return QCRYPTO_HASH_ALG_MD5;
> +
> + case VIRTIO_CRYPTO_RSA_SHA1:
> + return QCRYPTO_HASH_ALG_SHA1;
> +
> + case VIRTIO_CRYPTO_RSA_SHA256:
> + return QCRYPTO_HASH_ALG_SHA256;
> +
> + case VIRTIO_CRYPTO_RSA_SHA512:
> + return QCRYPTO_HASH_ALG_SHA512;
> +
> + default:
> + error_setg(errp, "Unsupported rsa hash algo: %d", virtio_rsa_hash);
> + return -1;
> + }
> +}
> +
> +static int cryptodev_builtin_set_rsa_options(
> + int virtio_padding_algo,
> + int virtio_hash_algo,
> + QCryptoAkCipherOptionsRSA *opt,
> + Error **errp)
> +{
> + if (virtio_padding_algo == VIRTIO_CRYPTO_RSA_PKCS1_PADDING) {
> + opt->padding_alg = QCRYPTO_RSA_PADDING_ALG_PKCS1;
> + opt->hash_alg =
> + cryptodev_builtin_get_rsa_hash_algo(virtio_hash_algo, errp);
> + if (opt->hash_alg < 0) {
> + return -1;
> + }
> + return 0;
> + }
> +
> + if (virtio_padding_algo == VIRTIO_CRYPTO_RSA_RAW_PADDING) {
> + opt->padding_alg = QCRYPTO_RSA_PADDING_ALG_RAW;
> + return 0;
> + }
> +
> + error_setg(errp, "Unsupported rsa padding algo: %d", virtio_padding_algo);
> + return -1;
> +}
> +
> static int cryptodev_builtin_create_cipher_session(
> CryptoDevBackendBuiltin *builtin,
> CryptoDevBackendSymSessionInfo *sess_info,
> @@ -240,26 +291,89 @@ static int cryptodev_builtin_create_cipher_session(
> return index;
> }
>
> -static int64_t cryptodev_builtin_sym_create_session(
> +static int cryptodev_builtin_create_akcipher_session(
> + CryptoDevBackendBuiltin *builtin,
> + CryptoDevBackendAsymSessionInfo *sess_info,
> + Error **errp)
> +{
> + CryptoDevBackendBuiltinSession *sess;
> + QCryptoAkCipher *akcipher;
> + int index;
> + QCryptoAkCipherKeyType type;
> + QCryptoAkCipherOptions opts;
> +
> + switch (sess_info->algo) {
> + case VIRTIO_CRYPTO_AKCIPHER_RSA:
> + opts.alg = QCRYPTO_AKCIPHER_ALG_RSA;
> + if (cryptodev_builtin_set_rsa_options(sess_info->u.rsa.padding_algo,
> + sess_info->u.rsa.hash_algo, &opts.u.rsa, errp) != 0) {
> + return -1;
> + }
> + break;
> +
> + /* TODO support DSA&ECDSA until qemu crypto framework support these */
> +
> + default:
> + error_setg(errp, "Unsupported akcipher alg %u", sess_info->algo);
> + return -1;
> + }
> +
> + switch (sess_info->keytype) {
> + case VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PUBLIC:
> + type = QCRYPTO_AKCIPHER_KEY_TYPE_PUBLIC;
> + break;
> +
> + case VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PRIVATE:
> + type = QCRYPTO_AKCIPHER_KEY_TYPE_PRIVATE;
> + break;
> +
> + default:
> + error_setg(errp, "Unsupported akcipher keytype %u", sess_info->keytype);
> + return -1;
> + }
> +
> + index = cryptodev_builtin_get_unused_session_index(builtin);
> + if (index < 0) {
> + error_setg(errp, "Total number of sessions created exceeds %u",
> + MAX_NUM_SESSIONS);
> + return -1;
> + }
> +
> + akcipher = qcrypto_akcipher_new(&opts, type, sess_info->key,
> + sess_info->keylen, errp);
> + if (!akcipher) {
> + return -1;
> + }
> +
> + sess = g_new0(CryptoDevBackendBuiltinSession, 1);
> + sess->akcipher = akcipher;
> +
> + builtin->sessions[index] = sess;
> +
> + return index;
> +}
> +
> +static int64_t cryptodev_builtin_create_session(
> CryptoDevBackend *backend,
> - CryptoDevBackendSymSessionInfo *sess_info,
> + CryptoDevBackendSessionInfo *sess_info,
> uint32_t queue_index, Error **errp)
> {
> CryptoDevBackendBuiltin *builtin =
> CRYPTODEV_BACKEND_BUILTIN(backend);
> - int64_t session_id = -1;
> - int ret;
> + CryptoDevBackendSymSessionInfo *sym_sess_info;
> + CryptoDevBackendAsymSessionInfo *asym_sess_info;
>
> switch (sess_info->op_code) {
> case VIRTIO_CRYPTO_CIPHER_CREATE_SESSION:
> - ret = cryptodev_builtin_create_cipher_session(
> - builtin, sess_info, errp);
> - if (ret < 0) {
> - return ret;
> - } else {
> - session_id = ret;
> - }
> - break;
> + sym_sess_info = &sess_info->u.sym_sess_info;
> + return cryptodev_builtin_create_cipher_session(
> + builtin, sym_sess_info, errp);
> +
> + case VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION:
> + asym_sess_info = &sess_info->u.asym_sess_info;
> + return cryptodev_builtin_create_akcipher_session(
> + builtin, asym_sess_info, errp);
> +
> case VIRTIO_CRYPTO_HASH_CREATE_SESSION:
> case VIRTIO_CRYPTO_MAC_CREATE_SESSION:
> default:
> @@ -268,50 +382,44 @@ static int64_t cryptodev_builtin_sym_create_session(
> return -1;
> }
>
> - return session_id;
> + return -1;
> }
>
> -static int cryptodev_builtin_sym_close_session(
> +static int cryptodev_builtin_close_session(
> CryptoDevBackend *backend,
> uint64_t session_id,
> uint32_t queue_index, Error **errp)
> {
> CryptoDevBackendBuiltin *builtin =
> CRYPTODEV_BACKEND_BUILTIN(backend);
> + CryptoDevBackendBuiltinSession *session;
>
> assert(session_id < MAX_NUM_SESSIONS && builtin->sessions[session_id]);
>
> - qcrypto_cipher_free(builtin->sessions[session_id]->cipher);
> - g_free(builtin->sessions[session_id]);
> + session = builtin->sessions[session_id];
> + if (session->cipher) {
> + qcrypto_cipher_free(session->cipher);
> + } else if (session->akcipher) {
> + qcrypto_akcipher_free(session->akcipher);
> + }
> +
> + g_free(session);
> builtin->sessions[session_id] = NULL;
> return 0;
> }
>
> static int cryptodev_builtin_sym_operation(
> - CryptoDevBackend *backend,
> - CryptoDevBackendSymOpInfo *op_info,
> - uint32_t queue_index, Error **errp)
> + CryptoDevBackendBuiltinSession *sess,
> + CryptoDevBackendSymOpInfo *op_info, Error **errp)
> {
> - CryptoDevBackendBuiltin *builtin =
> - CRYPTODEV_BACKEND_BUILTIN(backend);
> - CryptoDevBackendBuiltinSession *sess;
> int ret;
>
> - if (op_info->session_id >= MAX_NUM_SESSIONS ||
> - builtin->sessions[op_info->session_id] == NULL) {
> - error_setg(errp, "Cannot find a valid session id: %" PRIu64 "",
> - op_info->session_id);
> - return -VIRTIO_CRYPTO_INVSESS;
> - }
> -
> if (op_info->op_type == VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) {
> error_setg(errp,
> "Algorithm chain is unsupported for cryptdoev-builtin");
> return -VIRTIO_CRYPTO_NOTSUPP;
> }
>
> - sess = builtin->sessions[op_info->session_id];
> -
> if (op_info->iv_len > 0) {
> ret = qcrypto_cipher_setiv(sess->cipher, op_info->iv,
> op_info->iv_len, errp);
> @@ -333,9 +441,95 @@ static int cryptodev_builtin_sym_operation(
> return -VIRTIO_CRYPTO_ERR;
> }
> }
> +
> + return VIRTIO_CRYPTO_OK;
> +}
> +
> +static int cryptodev_builtin_asym_operation(
> + CryptoDevBackendBuiltinSession *sess, uint32_t op_code,
> + CryptoDevBackendAsymOpInfo *op_info, Error **errp)
> +{
> + int ret;
> +
> + switch (op_code) {
> + case VIRTIO_CRYPTO_AKCIPHER_ENCRYPT:
> + ret = qcrypto_akcipher_encrypt(sess->akcipher,
> + op_info->src, op_info->src_len,
> + op_info->dst, op_info->dst_len, errp);
> + break;
> +
> + case VIRTIO_CRYPTO_AKCIPHER_DECRYPT:
> + ret = qcrypto_akcipher_decrypt(sess->akcipher,
> + op_info->src, op_info->src_len,
> + op_info->dst, op_info->dst_len, errp);
> + break;
> +
> + case VIRTIO_CRYPTO_AKCIPHER_SIGN:
> + ret = qcrypto_akcipher_sign(sess->akcipher,
> + op_info->src, op_info->src_len,
> + op_info->dst, op_info->dst_len, errp);
> + break;
> +
> + case VIRTIO_CRYPTO_AKCIPHER_VERIFY:
> + ret = qcrypto_akcipher_verify(sess->akcipher,
> + op_info->src, op_info->src_len,
> + op_info->dst, op_info->dst_len, errp);
> + break;
> +
> + default:
> + return -VIRTIO_CRYPTO_ERR;
> + }
> +
> + if (ret < 0) {
> + if (op_code == VIRTIO_CRYPTO_AKCIPHER_VERIFY) {
> + return -VIRTIO_CRYPTO_KEY_REJECTED;
> + }
> + return -VIRTIO_CRYPTO_ERR;
> + }
> +
> + /* Buffer is too short */
> + if (unlikely(ret > op_info->dst_len)) {
> + return -VIRTIO_CRYPTO_ERR;
> + }
> +
> + op_info->dst_len = ret;
> +
> return VIRTIO_CRYPTO_OK;
> }
>
> +static int cryptodev_builtin_operation(
> + CryptoDevBackend *backend,
> + CryptoDevBackendOpInfo *op_info,
> + uint32_t queue_index, Error **errp)
> +{
> + CryptoDevBackendBuiltin *builtin =
> + CRYPTODEV_BACKEND_BUILTIN(backend);
> + CryptoDevBackendBuiltinSession *sess;
> + CryptoDevBackendSymOpInfo *sym_op_info;
> + CryptoDevBackendAsymOpInfo *asym_op_info;
> + enum CryptoDevBackendAlgType algtype = op_info->algtype;
> + int ret = -VIRTIO_CRYPTO_ERR;
> +
> + if (op_info->session_id >= MAX_NUM_SESSIONS ||
> + builtin->sessions[op_info->session_id] == NULL) {
> + error_setg(errp, "Cannot find a valid session id: %" PRIu64 "",
> + op_info->session_id);
> + return -VIRTIO_CRYPTO_INVSESS;
> + }
> +
> + sess = builtin->sessions[op_info->session_id];
> + if (algtype == CRYPTODEV_BACKEND_ALG_SYM) {
> + sym_op_info = op_info->u.sym_op_info;
> + ret = cryptodev_builtin_sym_operation(sess, sym_op_info, errp);
> + } else if (algtype == CRYPTODEV_BACKEND_ALG_ASYM) {
> + asym_op_info = op_info->u.asym_op_info;
> + ret = cryptodev_builtin_asym_operation(sess, op_info->op_code,
> + asym_op_info, errp);
> + }
> +
> + return ret;
> +}
> +
> static void cryptodev_builtin_cleanup(
> CryptoDevBackend *backend,
> Error **errp)
> @@ -348,7 +542,7 @@ static void cryptodev_builtin_cleanup(
>
> for (i = 0; i < MAX_NUM_SESSIONS; i++) {
> if (builtin->sessions[i] != NULL) {
> - cryptodev_builtin_sym_close_session(backend, i, 0, &error_abort);
> + cryptodev_builtin_close_session(backend, i, 0, &error_abort);
> }
> }
>
> @@ -370,9 +564,9 @@ cryptodev_builtin_class_init(ObjectClass *oc, void *data)
>
> bc->init = cryptodev_builtin_init;
> bc->cleanup = cryptodev_builtin_cleanup;
> - bc->create_session = cryptodev_builtin_sym_create_session;
> - bc->close_session = cryptodev_builtin_sym_close_session;
> - bc->do_sym_op = cryptodev_builtin_sym_operation;
> + bc->create_session = cryptodev_builtin_create_session;
> + bc->close_session = cryptodev_builtin_close_session;
> + bc->do_op = cryptodev_builtin_operation;
> }
>
> static const TypeInfo cryptodev_builtin_info = {
> diff --git a/backends/cryptodev-vhost-user.c b/backends/cryptodev-vhost-user.c
> index bedb452474..5443a59153 100644
> --- a/backends/cryptodev-vhost-user.c
> +++ b/backends/cryptodev-vhost-user.c
> @@ -259,7 +259,33 @@ static int64_t cryptodev_vhost_user_sym_create_session(
> return -1;
> }
>
> -static int cryptodev_vhost_user_sym_close_session(
> +static int64_t cryptodev_vhost_user_create_session(
> + CryptoDevBackend *backend,
> + CryptoDevBackendSessionInfo *sess_info,
> + uint32_t queue_index, Error **errp)
> +{
> + uint32_t op_code = sess_info->op_code;
> + CryptoDevBackendSymSessionInfo *sym_sess_info;
> +
> + switch (op_code) {
> + case VIRTIO_CRYPTO_CIPHER_CREATE_SESSION:
> + case VIRTIO_CRYPTO_HASH_CREATE_SESSION:
> + case VIRTIO_CRYPTO_MAC_CREATE_SESSION:
> + case VIRTIO_CRYPTO_AEAD_CREATE_SESSION:
> + sym_sess_info = &sess_info->u.sym_sess_info;
> + return cryptodev_vhost_user_sym_create_session(backend, sym_sess_info,
> + queue_index, errp);
> + default:
> + error_setg(errp, "Unsupported opcode :%" PRIu32 "",
> + sess_info->op_code);
> + return -1;
> +
> + }
> +
> + return -1;
> +}
> +
> +static int cryptodev_vhost_user_close_session(
> CryptoDevBackend *backend,
> uint64_t session_id,
> uint32_t queue_index, Error **errp)
> @@ -351,9 +377,9 @@ cryptodev_vhost_user_class_init(ObjectClass *oc, void *data)
>
> bc->init = cryptodev_vhost_user_init;
> bc->cleanup = cryptodev_vhost_user_cleanup;
> - bc->create_session = cryptodev_vhost_user_sym_create_session;
> - bc->close_session = cryptodev_vhost_user_sym_close_session;
> - bc->do_sym_op = NULL;
> + bc->create_session = cryptodev_vhost_user_create_session;
> + bc->close_session = cryptodev_vhost_user_close_session;
> + bc->do_op = NULL;
>
> object_class_property_add_str(oc, "chardev",
> cryptodev_vhost_user_get_chardev,
> diff --git a/backends/cryptodev.c b/backends/cryptodev.c
> index 2b105e433c..33eb4e1a70 100644
> --- a/backends/cryptodev.c
> +++ b/backends/cryptodev.c
> @@ -72,9 +72,9 @@ void cryptodev_backend_cleanup(
> }
> }
>
> -int64_t cryptodev_backend_sym_create_session(
> +int64_t cryptodev_backend_create_session(
> CryptoDevBackend *backend,
> - CryptoDevBackendSymSessionInfo *sess_info,
> + CryptoDevBackendSessionInfo *sess_info,
> uint32_t queue_index, Error **errp)
> {
> CryptoDevBackendClass *bc =
> @@ -87,7 +87,7 @@ int64_t cryptodev_backend_sym_create_session(
> return -1;
> }
>
> -int cryptodev_backend_sym_close_session(
> +int cryptodev_backend_close_session(
> CryptoDevBackend *backend,
> uint64_t session_id,
> uint32_t queue_index, Error **errp)
> @@ -102,16 +102,16 @@ int cryptodev_backend_sym_close_session(
> return -1;
> }
>
> -static int cryptodev_backend_sym_operation(
> +static int cryptodev_backend_operation(
> CryptoDevBackend *backend,
> - CryptoDevBackendSymOpInfo *op_info,
> + CryptoDevBackendOpInfo *op_info,
> uint32_t queue_index, Error **errp)
> {
> CryptoDevBackendClass *bc =
> CRYPTODEV_BACKEND_GET_CLASS(backend);
>
> - if (bc->do_sym_op) {
> - return bc->do_sym_op(backend, op_info, queue_index, errp);
> + if (bc->do_op) {
> + return bc->do_op(backend, op_info, queue_index, errp);
> }
>
> return -VIRTIO_CRYPTO_ERR;
> @@ -123,20 +123,18 @@ int cryptodev_backend_crypto_operation(
> uint32_t queue_index, Error **errp)
> {
> VirtIOCryptoReq *req = opaque;
> + CryptoDevBackendOpInfo *op_info = &req->op_info;
> + enum CryptoDevBackendAlgType algtype = req->flags;
>
> - if (req->flags == CRYPTODEV_BACKEND_ALG_SYM) {
> - CryptoDevBackendSymOpInfo *op_info;
> - op_info = req->u.sym_op_info;
> -
> - return cryptodev_backend_sym_operation(backend,
> - op_info, queue_index, errp);
> - } else {
> + if ((algtype != CRYPTODEV_BACKEND_ALG_SYM)
> + && (algtype != CRYPTODEV_BACKEND_ALG_ASYM)) {
> error_setg(errp, "Unsupported cryptodev alg type: %" PRIu32 "",
> - req->flags);
> - return -VIRTIO_CRYPTO_NOTSUPP;
> + algtype);
> +
> + return -VIRTIO_CRYPTO_NOTSUPP;
> }
>
> - return -VIRTIO_CRYPTO_ERR;
> + return cryptodev_backend_operation(backend, op_info, queue_index, errp);
> }
>
> static void
> diff --git a/hw/virtio/virtio-crypto.c b/hw/virtio/virtio-crypto.c
> index dcd80b904d..a98105d9e9 100644
> --- a/hw/virtio/virtio-crypto.c
> +++ b/hw/virtio/virtio-crypto.c
> @@ -83,7 +83,8 @@ virtio_crypto_create_sym_session(VirtIOCrypto *vcrypto,
> struct iovec *iov, unsigned int out_num)
> {
> VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
> - CryptoDevBackendSymSessionInfo info;
> + CryptoDevBackendSessionInfo info;
> + CryptoDevBackendSymSessionInfo *sym_info;
> int64_t session_id;
> int queue_index;
> uint32_t op_type;
> @@ -92,11 +93,13 @@ virtio_crypto_create_sym_session(VirtIOCrypto *vcrypto,
>
> memset(&info, 0, sizeof(info));
> op_type = ldl_le_p(&sess_req->op_type);
> - info.op_type = op_type;
> info.op_code = opcode;
>
> + sym_info = &info.u.sym_sess_info;
> + sym_info->op_type = op_type;
> +
> if (op_type == VIRTIO_CRYPTO_SYM_OP_CIPHER) {
> - ret = virtio_crypto_cipher_session_helper(vdev, &info,
> + ret = virtio_crypto_cipher_session_helper(vdev, sym_info,
> &sess_req->u.cipher.para,
> &iov, &out_num);
> if (ret < 0) {
> @@ -105,47 +108,47 @@ virtio_crypto_create_sym_session(VirtIOCrypto *vcrypto,
> } else if (op_type == VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) {
> size_t s;
> /* cipher part */
> - ret = virtio_crypto_cipher_session_helper(vdev, &info,
> + ret = virtio_crypto_cipher_session_helper(vdev, sym_info,
> &sess_req->u.chain.para.cipher_param,
> &iov, &out_num);
> if (ret < 0) {
> goto err;
> }
> /* hash part */
> - info.alg_chain_order = ldl_le_p(
> + sym_info->alg_chain_order = ldl_le_p(
> &sess_req->u.chain.para.alg_chain_order);
> - info.add_len = ldl_le_p(&sess_req->u.chain.para.aad_len);
> - info.hash_mode = ldl_le_p(&sess_req->u.chain.para.hash_mode);
> - if (info.hash_mode == VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH) {
> - info.hash_alg = ldl_le_p(&sess_req->u.chain.para.u.mac_param.algo);
> - info.auth_key_len = ldl_le_p(
> + sym_info->add_len = ldl_le_p(&sess_req->u.chain.para.aad_len);
> + sym_info->hash_mode = ldl_le_p(&sess_req->u.chain.para.hash_mode);
> + if (sym_info->hash_mode == VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH) {
> + sym_info->hash_alg =
> + ldl_le_p(&sess_req->u.chain.para.u.mac_param.algo);
> + sym_info->auth_key_len = ldl_le_p(
> &sess_req->u.chain.para.u.mac_param.auth_key_len);
> - info.hash_result_len = ldl_le_p(
> + sym_info->hash_result_len = ldl_le_p(
> &sess_req->u.chain.para.u.mac_param.hash_result_len);
> - if (info.auth_key_len > vcrypto->conf.max_auth_key_len) {
> + if (sym_info->auth_key_len > vcrypto->conf.max_auth_key_len) {
> error_report("virtio-crypto length of auth key is too big: %u",
> - info.auth_key_len);
> + sym_info->auth_key_len);
> ret = -VIRTIO_CRYPTO_ERR;
> goto err;
> }
> /* get auth key */
> - if (info.auth_key_len > 0) {
> - DPRINTF("auth_keylen=%" PRIu32 "\n", info.auth_key_len);
> - info.auth_key = g_malloc(info.auth_key_len);
> - s = iov_to_buf(iov, out_num, 0, info.auth_key,
> - info.auth_key_len);
> - if (unlikely(s != info.auth_key_len)) {
> + if (sym_info->auth_key_len > 0) {
> + sym_info->auth_key = g_malloc(sym_info->auth_key_len);
> + s = iov_to_buf(iov, out_num, 0, sym_info->auth_key,
> + sym_info->auth_key_len);
> + if (unlikely(s != sym_info->auth_key_len)) {
> virtio_error(vdev,
> "virtio-crypto authenticated key incorrect");
> ret = -EFAULT;
> goto err;
> }
> - iov_discard_front(&iov, &out_num, info.auth_key_len);
> + iov_discard_front(&iov, &out_num, sym_info->auth_key_len);
> }
> - } else if (info.hash_mode == VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN) {
> - info.hash_alg = ldl_le_p(
> + } else if (sym_info->hash_mode == VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN) {
> + sym_info->hash_alg = ldl_le_p(
> &sess_req->u.chain.para.u.hash_param.algo);
> - info.hash_result_len = ldl_le_p(
> + sym_info->hash_result_len = ldl_le_p(
> &sess_req->u.chain.para.u.hash_param.hash_result_len);
> } else {
> /* VIRTIO_CRYPTO_SYM_HASH_MODE_NESTED */
> @@ -161,13 +164,10 @@ virtio_crypto_create_sym_session(VirtIOCrypto *vcrypto,
> }
>
> queue_index = virtio_crypto_vq2q(queue_id);
> - session_id = cryptodev_backend_sym_create_session(
> + session_id = cryptodev_backend_create_session(
> vcrypto->cryptodev,
> &info, queue_index, &local_err);
> if (session_id >= 0) {
> - DPRINTF("create session_id=%" PRIu64 " successfully\n",
> - session_id);
> -
> ret = session_id;
> } else {
> if (local_err) {
> @@ -177,11 +177,78 @@ virtio_crypto_create_sym_session(VirtIOCrypto *vcrypto,
> }
>
> err:
> - g_free(info.cipher_key);
> - g_free(info.auth_key);
> + g_free(sym_info->cipher_key);
> + g_free(sym_info->auth_key);
> return ret;
> }
>
> +static int64_t
> +virtio_crypto_create_asym_session(VirtIOCrypto *vcrypto,
> + struct virtio_crypto_akcipher_create_session_req *sess_req,
> + uint32_t queue_id, uint32_t opcode,
> + struct iovec *iov, unsigned int out_num)
> +{
> + VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
> + CryptoDevBackendSessionInfo info = {0};
> + CryptoDevBackendAsymSessionInfo *asym_info;
> + int64_t session_id;
> + int queue_index;
> + uint32_t algo, keytype, keylen;
> + g_autofree uint8_t *key = NULL;
> + Error *local_err = NULL;
> +
> + algo = ldl_le_p(&sess_req->para.algo);
> + keytype = ldl_le_p(&sess_req->para.keytype);
> + keylen = ldl_le_p(&sess_req->para.keylen);
> +
> + if ((keytype != VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PUBLIC)
> + && (keytype != VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PRIVATE)) {
> + error_report("unsupported asym keytype: %d", keytype);
> + return -VIRTIO_CRYPTO_NOTSUPP;
> + }
> +
> + if (keylen) {
> + key = g_malloc(keylen);
> + if (iov_to_buf(iov, out_num, 0, key, keylen) != keylen) {
> + virtio_error(vdev, "virtio-crypto asym key incorrect");
> + return -EFAULT;
> + }
> + iov_discard_front(&iov, &out_num, keylen);
> + }
> +
> + info.op_code = opcode;
> + asym_info = &info.u.asym_sess_info;
> + asym_info->algo = algo;
> + asym_info->keytype = keytype;
> + asym_info->keylen = keylen;
> + asym_info->key = key;
> + switch (asym_info->algo) {
> + case VIRTIO_CRYPTO_AKCIPHER_RSA:
> + asym_info->u.rsa.padding_algo =
> + ldl_le_p(&sess_req->para.u.rsa.padding_algo);
> + asym_info->u.rsa.hash_algo =
> + ldl_le_p(&sess_req->para.u.rsa.hash_algo);
> + break;
> +
> + /* TODO DSA&ECDSA handling */
> +
> + default:
> + return -VIRTIO_CRYPTO_ERR;
> + }
> +
> + queue_index = virtio_crypto_vq2q(queue_id);
> + session_id = cryptodev_backend_create_session(vcrypto->cryptodev, &info,
> + queue_index, &local_err);
> + if (session_id < 0) {
> + if (local_err) {
> + error_report_err(local_err);
> + }
> + return -VIRTIO_CRYPTO_ERR;
> + }
> +
> + return session_id;
> +}
> +
> static uint8_t
> virtio_crypto_handle_close_session(VirtIOCrypto *vcrypto,
> struct virtio_crypto_destroy_session_req *close_sess_req,
> @@ -195,7 +262,7 @@ virtio_crypto_handle_close_session(VirtIOCrypto *vcrypto,
> session_id = ldq_le_p(&close_sess_req->session_id);
> DPRINTF("close session, id=%" PRIu64 "\n", session_id);
>
> - ret = cryptodev_backend_sym_close_session(
> + ret = cryptodev_backend_close_session(
> vcrypto->cryptodev, session_id, queue_id, &local_err);
> if (ret == 0) {
> status = VIRTIO_CRYPTO_OK;
> @@ -260,13 +327,22 @@ static void virtio_crypto_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
> opcode = ldl_le_p(&ctrl.header.opcode);
> queue_id = ldl_le_p(&ctrl.header.queue_id);
>
> + memset(&input, 0, sizeof(input));
> switch (opcode) {
> case VIRTIO_CRYPTO_CIPHER_CREATE_SESSION:
> - memset(&input, 0, sizeof(input));
> session_id = virtio_crypto_create_sym_session(vcrypto,
> &ctrl.u.sym_create_session,
> queue_id, opcode,
> out_iov, out_num);
> + goto check_session;
> +
> + case VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION:
> + session_id = virtio_crypto_create_asym_session(vcrypto,
> + &ctrl.u.akcipher_create_session,
> + queue_id, opcode,
> + out_iov, out_num);
> +
> +check_session:
> /* Serious errors, need to reset virtio crypto device */
> if (session_id == -EFAULT) {
> virtqueue_detach_element(vq, elem, 0);
> @@ -290,10 +366,12 @@ static void virtio_crypto_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
> virtqueue_push(vq, elem, sizeof(input));
> virtio_notify(vdev, vq);
> break;
> +
> case VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION:
> case VIRTIO_CRYPTO_HASH_DESTROY_SESSION:
> case VIRTIO_CRYPTO_MAC_DESTROY_SESSION:
> case VIRTIO_CRYPTO_AEAD_DESTROY_SESSION:
> + case VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION:
> status = virtio_crypto_handle_close_session(vcrypto,
> &ctrl.u.destroy_session, queue_id);
> /* The status only occupy one byte, we can directly use it */
> @@ -311,7 +389,6 @@ static void virtio_crypto_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
> case VIRTIO_CRYPTO_AEAD_CREATE_SESSION:
> default:
> error_report("virtio-crypto unsupported ctrl opcode: %d", opcode);
> - memset(&input, 0, sizeof(input));
> stl_le_p(&input.status, VIRTIO_CRYPTO_NOTSUPP);
> s = iov_from_buf(in_iov, in_num, 0, &input, sizeof(input));
> if (unlikely(s != sizeof(input))) {
> @@ -339,28 +416,39 @@ static void virtio_crypto_init_request(VirtIOCrypto *vcrypto, VirtQueue *vq,
> req->in_num = 0;
> req->in_len = 0;
> req->flags = CRYPTODEV_BACKEND_ALG__MAX;
> - req->u.sym_op_info = NULL;
> + memset(&req->op_info, 0x00, sizeof(req->op_info));
> }
>
> static void virtio_crypto_free_request(VirtIOCryptoReq *req)
> {
> - if (req) {
> - if (req->flags == CRYPTODEV_BACKEND_ALG_SYM) {
> - size_t max_len;
> - CryptoDevBackendSymOpInfo *op_info = req->u.sym_op_info;
> -
> - max_len = op_info->iv_len +
> - op_info->aad_len +
> - op_info->src_len +
> - op_info->dst_len +
> - op_info->digest_result_len;
> -
> - /* Zeroize and free request data structure */
> - memset(op_info, 0, sizeof(*op_info) + max_len);
> + if (!req) {
> + return;
> + }
> +
> + if (req->flags == CRYPTODEV_BACKEND_ALG_SYM) {
> + size_t max_len;
> + CryptoDevBackendSymOpInfo *op_info = req->op_info.u.sym_op_info;
> +
> + max_len = op_info->iv_len +
> + op_info->aad_len +
> + op_info->src_len +
> + op_info->dst_len +
> + op_info->digest_result_len;
> +
> + /* Zeroize and free request data structure */
> + memset(op_info, 0, sizeof(*op_info) + max_len);
> + g_free(op_info);
> + } else if (req->flags == CRYPTODEV_BACKEND_ALG_ASYM) {
> + CryptoDevBackendAsymOpInfo *op_info = req->op_info.u.asym_op_info;
> + if (op_info) {
> + g_free(op_info->src);
> + g_free(op_info->dst);
> + memset(op_info, 0, sizeof(*op_info));
> g_free(op_info);
> }
> - g_free(req);
> }
> +
> + g_free(req);
> }
>
> static void
> @@ -397,6 +485,35 @@ virtio_crypto_sym_input_data_helper(VirtIODevice *vdev,
> }
> }
>
> +static void
> +virtio_crypto_akcipher_input_data_helper(VirtIODevice *vdev,
> + VirtIOCryptoReq *req, int32_t status,
> + CryptoDevBackendAsymOpInfo *asym_op_info)
> +{
> + size_t s, len;
> +
> + if (status != VIRTIO_CRYPTO_OK) {
> + return;
> + }
> +
> + len = asym_op_info->dst_len;
> + if (!len) {
> + return;
> + }
> +
> + s = iov_from_buf(req->in_iov, req->in_num, 0, asym_op_info->dst, len);
> + if (s != len) {
> + virtio_error(vdev, "virtio-crypto asym dest data incorrect");
> + return;
> + }
> +
> + iov_discard_front(&req->in_iov, &req->in_num, len);
> +
> + /* For akcipher, dst_len may be changed after operation */
> + req->in_len = sizeof(struct virtio_crypto_inhdr) + asym_op_info->dst_len;
> +}
> +
> +
> static void virtio_crypto_req_complete(VirtIOCryptoReq *req, uint8_t status)
> {
> VirtIOCrypto *vcrypto = req->vcrypto;
> @@ -404,7 +521,10 @@ static void virtio_crypto_req_complete(VirtIOCryptoReq *req, uint8_t status)
>
> if (req->flags == CRYPTODEV_BACKEND_ALG_SYM) {
> virtio_crypto_sym_input_data_helper(vdev, req, status,
> - req->u.sym_op_info);
> + req->op_info.u.sym_op_info);
> + } else if (req->flags == CRYPTODEV_BACKEND_ALG_ASYM) {
> + virtio_crypto_akcipher_input_data_helper(vdev, req, status,
> + req->op_info.u.asym_op_info);
> }
> stb_p(&req->in->status, status);
> virtqueue_push(req->vq, &req->elem, req->in_len);
> @@ -543,41 +663,100 @@ err:
> static int
> virtio_crypto_handle_sym_req(VirtIOCrypto *vcrypto,
> struct virtio_crypto_sym_data_req *req,
> - CryptoDevBackendSymOpInfo **sym_op_info,
> + CryptoDevBackendOpInfo *op_info,
> struct iovec *iov, unsigned int out_num)
> {
> VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
> + CryptoDevBackendSymOpInfo *sym_op_info;
> uint32_t op_type;
> - CryptoDevBackendSymOpInfo *op_info;
>
> op_type = ldl_le_p(&req->op_type);
> -
> if (op_type == VIRTIO_CRYPTO_SYM_OP_CIPHER) {
> - op_info = virtio_crypto_sym_op_helper(vdev, &req->u.cipher.para,
> + sym_op_info = virtio_crypto_sym_op_helper(vdev, &req->u.cipher.para,
> NULL, iov, out_num);
> - if (!op_info) {
> + if (!sym_op_info) {
> return -EFAULT;
> }
> - op_info->op_type = op_type;
> } else if (op_type == VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) {
> - op_info = virtio_crypto_sym_op_helper(vdev, NULL,
> + sym_op_info = virtio_crypto_sym_op_helper(vdev, NULL,
> &req->u.chain.para,
> iov, out_num);
> - if (!op_info) {
> + if (!sym_op_info) {
> return -EFAULT;
> }
> - op_info->op_type = op_type;
> } else {
> /* VIRTIO_CRYPTO_SYM_OP_NONE */
> error_report("virtio-crypto unsupported cipher type");
> return -VIRTIO_CRYPTO_NOTSUPP;
> }
>
> - *sym_op_info = op_info;
> + sym_op_info->op_type = op_type;
> + op_info->u.sym_op_info = sym_op_info;
>
> return 0;
> }
>
> +static int
> +virtio_crypto_handle_asym_req(VirtIOCrypto *vcrypto,
> + struct virtio_crypto_akcipher_data_req *req,
> + CryptoDevBackendOpInfo *op_info,
> + struct iovec *iov, unsigned int out_num)
> +{
> + VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
> + CryptoDevBackendAsymOpInfo *asym_op_info;
> + uint32_t src_len;
> + uint32_t dst_len;
> + uint32_t len;
> + uint8_t *src = NULL;
> + uint8_t *dst = NULL;
> +
> + asym_op_info = g_malloc0(sizeof(CryptoDevBackendAsymOpInfo));
> + src_len = ldl_le_p(&req->para.src_data_len);
> + dst_len = ldl_le_p(&req->para.dst_data_len);
> +
> + if (src_len > 0) {
> + src = g_malloc0(src_len);
> + len = iov_to_buf(iov, out_num, 0, src, src_len);
> + if (unlikely(len != src_len)) {
> + virtio_error(vdev, "virtio-crypto asym src data incorrect"
> + "expected %u, actual %u", src_len, len);
> + goto err;
> + }
> +
> + iov_discard_front(&iov, &out_num, src_len);
> + }
> +
> + if (dst_len > 0) {
> + dst = g_malloc0(dst_len);
> +
> + if (op_info->op_code == VIRTIO_CRYPTO_AKCIPHER_VERIFY) {
> + len = iov_to_buf(iov, out_num, 0, dst, dst_len);
> + if (unlikely(len != dst_len)) {
> + virtio_error(vdev, "virtio-crypto asym dst data incorrect"
> + "expected %u, actual %u", dst_len, len);
> + goto err;
> + }
> +
> + iov_discard_front(&iov, &out_num, dst_len);
> + }
> + }
> +
> + asym_op_info->src_len = src_len;
> + asym_op_info->dst_len = dst_len;
> + asym_op_info->src = src;
> + asym_op_info->dst = dst;
> + op_info->u.asym_op_info = asym_op_info;
> +
> + return 0;
> +
> + err:
> + g_free(asym_op_info);
> + g_free(src);
> + g_free(dst);
> +
> + return -EFAULT;
> +}
> +
> static int
> virtio_crypto_handle_request(VirtIOCryptoReq *request)
> {
> @@ -595,8 +774,7 @@ virtio_crypto_handle_request(VirtIOCryptoReq *request)
> unsigned out_num;
> uint32_t opcode;
> uint8_t status = VIRTIO_CRYPTO_ERR;
> - uint64_t session_id;
> - CryptoDevBackendSymOpInfo *sym_op_info = NULL;
> + CryptoDevBackendOpInfo *op_info = &request->op_info;
> Error *local_err = NULL;
>
> if (elem->out_num < 1 || elem->in_num < 1) {
> @@ -639,15 +817,28 @@ virtio_crypto_handle_request(VirtIOCryptoReq *request)
> request->in_iov = in_iov;
>
> opcode = ldl_le_p(&req.header.opcode);
> - session_id = ldq_le_p(&req.header.session_id);
> + op_info->session_id = ldq_le_p(&req.header.session_id);
> + op_info->op_code = opcode;
>
> switch (opcode) {
> case VIRTIO_CRYPTO_CIPHER_ENCRYPT:
> case VIRTIO_CRYPTO_CIPHER_DECRYPT:
> + op_info->algtype = request->flags = CRYPTODEV_BACKEND_ALG_SYM;
> ret = virtio_crypto_handle_sym_req(vcrypto,
> - &req.u.sym_req,
> - &sym_op_info,
> + &req.u.sym_req, op_info,
> + out_iov, out_num);
> + goto check_result;
> +
> + case VIRTIO_CRYPTO_AKCIPHER_ENCRYPT:
> + case VIRTIO_CRYPTO_AKCIPHER_DECRYPT:
> + case VIRTIO_CRYPTO_AKCIPHER_SIGN:
> + case VIRTIO_CRYPTO_AKCIPHER_VERIFY:
> + op_info->algtype = request->flags = CRYPTODEV_BACKEND_ALG_ASYM;
> + ret = virtio_crypto_handle_asym_req(vcrypto,
> + &req.u.akcipher_req, op_info,
> out_iov, out_num);
> +
> +check_result:
> /* Serious errors, need to reset virtio crypto device */
> if (ret == -EFAULT) {
> return -1;
> @@ -655,11 +846,8 @@ virtio_crypto_handle_request(VirtIOCryptoReq *request)
> virtio_crypto_req_complete(request, VIRTIO_CRYPTO_NOTSUPP);
> virtio_crypto_free_request(request);
> } else {
> - sym_op_info->session_id = session_id;
>
> /* Set request's parameter */
> - request->flags = CRYPTODEV_BACKEND_ALG_SYM;
> - request->u.sym_op_info = sym_op_info;
> ret = cryptodev_backend_crypto_operation(vcrypto->cryptodev,
> request, queue_index, &local_err);
> if (ret < 0) {
> @@ -674,6 +862,7 @@ virtio_crypto_handle_request(VirtIOCryptoReq *request)
> virtio_crypto_free_request(request);
> }
> break;
> +
> case VIRTIO_CRYPTO_HASH:
> case VIRTIO_CRYPTO_MAC:
> case VIRTIO_CRYPTO_AEAD_ENCRYPT:
> @@ -779,6 +968,7 @@ static void virtio_crypto_init_config(VirtIODevice *vdev)
> vcrypto->conf.mac_algo_l = vcrypto->conf.cryptodev->conf.mac_algo_l;
> vcrypto->conf.mac_algo_h = vcrypto->conf.cryptodev->conf.mac_algo_h;
> vcrypto->conf.aead_algo = vcrypto->conf.cryptodev->conf.aead_algo;
> + vcrypto->conf.akcipher_algo = vcrypto->conf.cryptodev->conf.akcipher_algo;
> vcrypto->conf.max_cipher_key_len =
> vcrypto->conf.cryptodev->conf.max_cipher_key_len;
> vcrypto->conf.max_auth_key_len =
> @@ -891,6 +1081,7 @@ static void virtio_crypto_get_config(VirtIODevice *vdev, uint8_t *config)
> stl_le_p(&crypto_cfg.max_cipher_key_len, c->conf.max_cipher_key_len);
> stl_le_p(&crypto_cfg.max_auth_key_len, c->conf.max_auth_key_len);
> stq_le_p(&crypto_cfg.max_size, c->conf.max_size);
> + stl_le_p(&crypto_cfg.akcipher_algo, c->conf.akcipher_algo);
>
> memcpy(config, &crypto_cfg, c->config_size);
> }
> diff --git a/include/hw/virtio/virtio-crypto.h b/include/hw/virtio/virtio-crypto.h
> index a2228d7b2e..348749f5d5 100644
> --- a/include/hw/virtio/virtio-crypto.h
> +++ b/include/hw/virtio/virtio-crypto.h
> @@ -50,6 +50,7 @@ typedef struct VirtIOCryptoConf {
> uint32_t mac_algo_l;
> uint32_t mac_algo_h;
> uint32_t aead_algo;
> + uint32_t akcipher_algo;
>
> /* Maximum length of cipher key */
> uint32_t max_cipher_key_len;
> @@ -71,9 +72,7 @@ typedef struct VirtIOCryptoReq {
> size_t in_len;
> VirtQueue *vq;
> struct VirtIOCrypto *vcrypto;
> - union {
> - CryptoDevBackendSymOpInfo *sym_op_info;
> - } u;
> + CryptoDevBackendOpInfo op_info;
> } VirtIOCryptoReq;
>
> typedef struct VirtIOCryptoQueue {
> diff --git a/include/sysemu/cryptodev.h b/include/sysemu/cryptodev.h
> index f4d4057d4d..37c3a360fd 100644
> --- a/include/sysemu/cryptodev.h
> +++ b/include/sysemu/cryptodev.h
> @@ -50,13 +50,13 @@ typedef struct CryptoDevBackendClient
>
> enum CryptoDevBackendAlgType {
> CRYPTODEV_BACKEND_ALG_SYM,
> + CRYPTODEV_BACKEND_ALG_ASYM,
> CRYPTODEV_BACKEND_ALG__MAX,
> };
>
> /**
> * CryptoDevBackendSymSessionInfo:
> *
> - * @op_code: operation code (refer to virtio_crypto.h)
> * @cipher_alg: algorithm type of CIPHER
> * @key_len: byte length of cipher key
> * @hash_alg: algorithm type of HASH/MAC
> @@ -74,7 +74,6 @@ enum CryptoDevBackendAlgType {
> */
> typedef struct CryptoDevBackendSymSessionInfo {
> /* corresponding with virtio crypto spec */
> - uint32_t op_code;
> uint32_t cipher_alg;
> uint32_t key_len;
> uint32_t hash_alg;
> @@ -89,11 +88,36 @@ typedef struct CryptoDevBackendSymSessionInfo {
> uint8_t *auth_key;
> } CryptoDevBackendSymSessionInfo;
>
> +/**
> + * CryptoDevBackendAsymSessionInfo:
> + */
> +typedef struct CryptoDevBackendRsaPara {
> + uint32_t padding_algo;
> + uint32_t hash_algo;
> +} CryptoDevBackendRsaPara;
> +
> +typedef struct CryptoDevBackendAsymSessionInfo {
> + /* corresponding with virtio crypto spec */
> + uint32_t algo;
> + uint32_t keytype;
> + uint32_t keylen;
> + uint8_t *key;
> + union {
> + CryptoDevBackendRsaPara rsa;
> + } u;
> +} CryptoDevBackendAsymSessionInfo;
> +
> +typedef struct CryptoDevBackendSessionInfo {
> + uint32_t op_code;
> + union {
> + CryptoDevBackendSymSessionInfo sym_sess_info;
> + CryptoDevBackendAsymSessionInfo asym_sess_info;
> + } u;
> +} CryptoDevBackendSessionInfo;
> +
> /**
> * CryptoDevBackendSymOpInfo:
> *
> - * @session_id: session index which was previously
> - * created by cryptodev_backend_sym_create_session()
> * @aad_len: byte length of additional authenticated data
> * @iv_len: byte length of initialization vector or counter
> * @src_len: byte length of source data
> @@ -119,7 +143,6 @@ typedef struct CryptoDevBackendSymSessionInfo {
> *
> */
> typedef struct CryptoDevBackendSymOpInfo {
> - uint64_t session_id;
> uint32_t aad_len;
> uint32_t iv_len;
> uint32_t src_len;
> @@ -138,6 +161,33 @@ typedef struct CryptoDevBackendSymOpInfo {
> uint8_t data[];
> } CryptoDevBackendSymOpInfo;
>
> +
> +/**
> + * CryptoDevBackendAsymOpInfo:
> + *
> + * @src_len: byte length of source data
> + * @dst_len: byte length of destination data
> + * @src: point to the source data
> + * @dst: point to the destination data
> + *
> + */
> +typedef struct CryptoDevBackendAsymOpInfo {
> + uint32_t src_len;
> + uint32_t dst_len;
> + uint8_t *src;
> + uint8_t *dst;
> +} CryptoDevBackendAsymOpInfo;
> +
> +typedef struct CryptoDevBackendOpInfo {
> + enum CryptoDevBackendAlgType algtype;
> + uint32_t op_code;
> + uint64_t session_id;
> + union {
> + CryptoDevBackendSymOpInfo *sym_op_info;
> + CryptoDevBackendAsymOpInfo *asym_op_info;
> + } u;
> +} CryptoDevBackendOpInfo;
> +
> struct CryptoDevBackendClass {
> ObjectClass parent_class;
>
> @@ -145,13 +195,13 @@ struct CryptoDevBackendClass {
> void (*cleanup)(CryptoDevBackend *backend, Error **errp);
>
> int64_t (*create_session)(CryptoDevBackend *backend,
> - CryptoDevBackendSymSessionInfo *sess_info,
> + CryptoDevBackendSessionInfo *sess_info,
> uint32_t queue_index, Error **errp);
> int (*close_session)(CryptoDevBackend *backend,
> uint64_t session_id,
> uint32_t queue_index, Error **errp);
> - int (*do_sym_op)(CryptoDevBackend *backend,
> - CryptoDevBackendSymOpInfo *op_info,
> + int (*do_op)(CryptoDevBackend *backend,
> + CryptoDevBackendOpInfo *op_info,
> uint32_t queue_index, Error **errp);
> };
>
> @@ -190,6 +240,7 @@ struct CryptoDevBackendConf {
> uint32_t mac_algo_l;
> uint32_t mac_algo_h;
> uint32_t aead_algo;
> + uint32_t akcipher_algo;
> /* Maximum length of cipher key */
> uint32_t max_cipher_key_len;
> /* Maximum length of authenticated key */
> @@ -247,34 +298,34 @@ void cryptodev_backend_cleanup(
> Error **errp);
>
> /**
> - * cryptodev_backend_sym_create_session:
> + * cryptodev_backend_create_session:
> * @backend: the cryptodev backend object
> * @sess_info: parameters needed by session creating
> * @queue_index: queue index of cryptodev backend client
> * @errp: pointer to a NULL-initialized error object
> *
> - * Create a session for symmetric algorithms
> + * Create a session for symmetric/symmetric algorithms
> *
> * Returns: session id on success, or -1 on error
> */
> -int64_t cryptodev_backend_sym_create_session(
> +int64_t cryptodev_backend_create_session(
> CryptoDevBackend *backend,
> - CryptoDevBackendSymSessionInfo *sess_info,
> + CryptoDevBackendSessionInfo *sess_info,
> uint32_t queue_index, Error **errp);
>
> /**
> - * cryptodev_backend_sym_close_session:
> + * cryptodev_backend_close_session:
> * @backend: the cryptodev backend object
> * @session_id: the session id
> * @queue_index: queue index of cryptodev backend client
> * @errp: pointer to a NULL-initialized error object
> *
> - * Close a session for symmetric algorithms which was previously
> - * created by cryptodev_backend_sym_create_session()
> + * Close a session for which was previously
> + * created by cryptodev_backend_create_session()
> *
> * Returns: 0 on success, or Negative on error
> */
> -int cryptodev_backend_sym_close_session(
> +int cryptodev_backend_close_session(
> CryptoDevBackend *backend,
> uint64_t session_id,
> uint32_t queue_index, Error **errp);
--
zhenwei pi
next prev parent reply other threads:[~2022-05-09 2:21 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-28 13:59 [PATCH v5 0/9] Introduce akcipher service for virtio-crypto zhenwei pi
2022-04-28 13:59 ` [PATCH v5 1/9] virtio-crypto: header update zhenwei pi
2022-05-12 9:55 ` Daniel P. Berrangé
2022-05-13 3:50 ` zhenwei pi
2022-04-28 13:59 ` [PATCH v5 2/9] qapi: crypto-akcipher: Introduce akcipher types to qapi zhenwei pi
2022-04-28 13:59 ` [PATCH v5 3/9] crypto: Introduce akcipher crypto class zhenwei pi
2022-05-12 10:04 ` Daniel P. Berrangé
2022-04-28 13:59 ` [PATCH v5 4/9] crypto: add ASN.1 DER decoder zhenwei pi
2022-05-12 9:46 ` Daniel P. Berrangé
2022-04-28 13:59 ` [PATCH v5 5/9] crypto: Implement RSA algorithm by hogweed zhenwei pi
2022-05-13 10:55 ` Daniel P. Berrangé
2022-05-13 12:26 ` [External] " 何磊
2022-05-13 12:29 ` Daniel P. Berrangé
2022-04-28 13:59 ` [PATCH v5 6/9] crypto: Implement RSA algorithm by gcrypt zhenwei pi
2022-05-13 11:00 ` Daniel P. Berrangé
2022-04-28 13:59 ` [PATCH v5 7/9] test/crypto: Add test suite for crypto akcipher zhenwei pi
2022-05-12 9:38 ` Daniel P. Berrangé
2022-04-28 13:59 ` [PATCH v5 8/9] tests/crypto: Add test suite for RSA keys zhenwei pi
2022-05-13 10:35 ` Daniel P. Berrangé
2022-04-28 13:59 ` [PATCH v5 9/9] crypto: Introduce RSA algorithm zhenwei pi
2022-05-09 2:17 ` zhenwei pi [this message]
2022-05-13 10:19 ` [PATCH v5 0/9] Introduce akcipher service for virtio-crypto Michael S. Tsirkin
2022-05-13 10:21 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57cb6d3f-e1bc-7e07-dd27-a3dfc83ae6c4@bytedance.com \
--to=pizhenwei@bytedance.com \
--cc=arei.gonglei@huawei.com \
--cc=berrange@redhat.com \
--cc=cohuck@redhat.com \
--cc=helei.sig11@bytedance.com \
--cc=jasowang@redhat.com \
--cc=linux-crypto@vger.kernel.org \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).