[PATCH 0/5] crypto: hisilicon/sec2 - fix SEC bugs and coding styles

[PATCH 0/5] crypto: hisilicon/sec2 - fix SEC bugs and coding styles

[Longfang Liu]

Fix some SEC driver bugs and modify some coding styles

Kai Ye (2):
  crypto: hisilicon/sec2 - clear SEC debug regs
  crypto:hisilicon/sec2 - update busy processing logic

Longfang Liu (3):
  crypto: hisilicon/sec2 - update SEC initialization and reset
  crypto: hisilicon/sec2 - update debugfs interface parameters
  crypto: hisilicon/sec2 - fix some coding styles

 drivers/crypto/hisilicon/qm.h              |   1 +
 drivers/crypto/hisilicon/sec2/sec.h        |   3 +
 drivers/crypto/hisilicon/sec2/sec_crypto.c |  81 +++++++++++++------
 drivers/crypto/hisilicon/sec2/sec_main.c   | 126 +++++++++++++++--------------
 4 files changed, 128 insertions(+), 83 deletions(-)

-- 
2.8.1

[PATCH 1/5] crypto: hisilicon/sec2 - clear SEC debug regs

[Longfang Liu]

From: Kai Ye <yekai13@huawei.com>

SEC debug registers aren't cleared even if its driver is removed,
so add a clearing operation in driver removing.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
---
 drivers/crypto/hisilicon/sec2/sec_main.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c
index a4cb58b..c2567cc 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -346,10 +346,17 @@ static int sec_set_user_domain_and_cache(struct hisi_qm *qm)
 /* sec_debug_regs_clear() - clear the sec debug regs */
 static void sec_debug_regs_clear(struct hisi_qm *qm)
 {
+	int i;
+
 	/* clear current_qm */
 	writel(0x0, qm->io_base + QM_DFX_MB_CNT_VF);
 	writel(0x0, qm->io_base + QM_DFX_DB_CNT_VF);
 
+	/* clear sec dfx regs */
+	writel(0x1, qm->io_base + SEC_CTRL_CNT_CLR_CE);
+	for (i = 0; i < ARRAY_SIZE(sec_dfx_regs); i++)
+		readl(qm->io_base + sec_dfx_regs[i].offset);
+
 	/* clear rdclr_en */
 	writel(0x0, qm->io_base + SEC_CTRL_CNT_CLR_CE);
 
-- 
2.8.1

[PATCH 2/5] crypto:hisilicon/sec2 - update busy processing logic

[Longfang Liu]

From: Kai Ye <yekai13@huawei.com>

As before, if a SEC queue is at the 'fake busy' status,
the request with a 'fake busy' flag will be sent into hardware
and the sending function returns busy. After the request is
finished, SEC driver's call back will identify the 'fake busy' flag,
and notifies the user that hardware is not busy now by calling
user's call back function.

Now, a request sent into busy hardware will be cached in the
SEC queue's backlog, return '-EBUSY' to user.
After the request being finished, the cached requests will
be processed in the call back function. to notify the
corresponding user that SEC queue can process more requests.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
---
 drivers/crypto/hisilicon/sec2/sec.h        |  3 ++
 drivers/crypto/hisilicon/sec2/sec_crypto.c | 81 +++++++++++++++++++++---------
 drivers/crypto/hisilicon/sec2/sec_main.c   |  1 +
 3 files changed, 61 insertions(+), 24 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec.h b/drivers/crypto/hisilicon/sec2/sec.h
index 7b64aca..ce91c4d 100644
--- a/drivers/crypto/hisilicon/sec2/sec.h
+++ b/drivers/crypto/hisilicon/sec2/sec.h
@@ -46,6 +46,7 @@ struct sec_req {
 
 	struct sec_cipher_req c_req;
 	struct sec_aead_req aead_req;
+	struct list_head backlog_head;
 
 	int err_type;
 	int req_id;
@@ -104,6 +105,7 @@ struct sec_qp_ctx {
 	struct sec_alg_res res[QM_Q_DEPTH];
 	struct sec_ctx *ctx;
 	struct mutex req_lock;
+	struct list_head backlog;
 	struct hisi_acc_sgl_pool *c_in_pool;
 	struct hisi_acc_sgl_pool *c_out_pool;
 	atomic_t pending_reqs;
@@ -161,6 +163,7 @@ struct sec_dfx {
 	atomic64_t send_cnt;
 	atomic64_t recv_cnt;
 	atomic64_t send_busy_cnt;
+	atomic64_t recv_busy_cnt;
 	atomic64_t err_bd_cnt;
 	atomic64_t invalid_req_cnt;
 	atomic64_t done_flag_cnt;
diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c
index 64614a9..85fcb4d 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.c
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c
@@ -166,6 +166,7 @@ static void sec_req_cb(struct hisi_qp *qp, void *resp)
 	req = qp_ctx->req_list[le16_to_cpu(bd->type2.tag)];
 	if (unlikely(!req)) {
 		atomic64_inc(&dfx->invalid_req_cnt);
+		atomic_inc(&qp->qp_status.used);
 		return;
 	}
 	req->err_type = bd->type2.error_type;
@@ -200,19 +201,23 @@ static int sec_bd_send(struct sec_ctx *ctx, struct sec_req *req)
 
 	mutex_lock(&qp_ctx->req_lock);
 	ret = hisi_qp_send(qp_ctx->qp, &req->sec_sqe);
+
+	if (ctx->fake_req_limit <=
+	    atomic_read(&qp_ctx->qp->qp_status.used) && !ret) {
+		list_add_tail(&req->backlog_head, &qp_ctx->backlog);
+		atomic64_inc(&ctx->sec->debug.dfx.send_cnt);
+		atomic64_inc(&ctx->sec->debug.dfx.send_busy_cnt);
+		mutex_unlock(&qp_ctx->req_lock);
+		return -EBUSY;
+	}
 	mutex_unlock(&qp_ctx->req_lock);
-	atomic64_inc(&ctx->sec->debug.dfx.send_cnt);
 
 	if (unlikely(ret == -EBUSY))
 		return -ENOBUFS;
 
-	if (!ret) {
-		if (req->fake_busy) {
-			atomic64_inc(&ctx->sec->debug.dfx.send_busy_cnt);
-			ret = -EBUSY;
-		} else {
-			ret = -EINPROGRESS;
-		}
+	if (likely(!ret)) {
+		ret = -EINPROGRESS;
+		atomic64_inc(&ctx->sec->debug.dfx.send_cnt);
 	}
 
 	return ret;
@@ -373,8 +378,8 @@ static int sec_create_qp_ctx(struct hisi_qm *qm, struct sec_ctx *ctx,
 	qp_ctx->ctx = ctx;
 
 	mutex_init(&qp_ctx->req_lock);
-	atomic_set(&qp_ctx->pending_reqs, 0);
 	idr_init(&qp_ctx->req_idr);
+	INIT_LIST_HEAD(&qp_ctx->backlog);
 
 	qp_ctx->c_in_pool = hisi_acc_create_sgl_pool(dev, QM_Q_DEPTH,
 						     SEC_SGL_SGE_NR);
@@ -1048,21 +1053,49 @@ static void sec_update_iv(struct sec_req *req, enum sec_alg_type alg_type)
 		dev_err(SEC_CTX_DEV(req->ctx), "copy output iv error!\n");
 }
 
+static struct sec_req *sec_back_req_clear(struct sec_ctx *ctx,
+				struct sec_qp_ctx *qp_ctx)
+{
+	struct sec_req *backlog_req = NULL;
+
+	mutex_lock(&qp_ctx->req_lock);
+	if (ctx->fake_req_limit >=
+	    atomic_read(&qp_ctx->qp->qp_status.used) &&
+	    !list_empty(&qp_ctx->backlog)) {
+		backlog_req = list_first_entry(&qp_ctx->backlog,
+				typeof(*backlog_req), backlog_head);
+		list_del(&backlog_req->backlog_head);
+	}
+	mutex_unlock(&qp_ctx->req_lock);
+
+	return backlog_req;
+}
+
 static void sec_skcipher_callback(struct sec_ctx *ctx, struct sec_req *req,
 				  int err)
 {
 	struct skcipher_request *sk_req = req->c_req.sk_req;
 	struct sec_qp_ctx *qp_ctx = req->qp_ctx;
+	struct skcipher_request *backlog_sk_req;
+	struct sec_req *backlog_req;
 
-	atomic_dec(&qp_ctx->pending_reqs);
 	sec_free_req_id(req);
 
 	/* IV output at encrypto of CBC mode */
 	if (!err && ctx->c_ctx.c_mode == SEC_CMODE_CBC && req->c_req.encrypt)
 		sec_update_iv(req, SEC_SKCIPHER);
 
-	if (req->fake_busy)
-		sk_req->base.complete(&sk_req->base, -EINPROGRESS);
+	while (1) {
+		backlog_req = sec_back_req_clear(ctx, qp_ctx);
+		if (!backlog_req)
+			break;
+
+		backlog_sk_req = backlog_req->c_req.sk_req;
+		backlog_sk_req->base.complete(&backlog_sk_req->base,
+						-EINPROGRESS);
+		atomic64_inc(&ctx->sec->debug.dfx.recv_busy_cnt);
+	}
+
 
 	sk_req->base.complete(&sk_req->base, err);
 }
@@ -1133,10 +1166,10 @@ static void sec_aead_callback(struct sec_ctx *c, struct sec_req *req, int err)
 	struct sec_cipher_req *c_req = &req->c_req;
 	size_t authsize = crypto_aead_authsize(tfm);
 	struct sec_qp_ctx *qp_ctx = req->qp_ctx;
+	struct aead_request *backlog_aead_req;
+	struct sec_req *backlog_req;
 	size_t sz;
 
-	atomic_dec(&qp_ctx->pending_reqs);
-
 	if (!err && c->c_ctx.c_mode == SEC_CMODE_CBC && c_req->encrypt)
 		sec_update_iv(req, SEC_AEAD);
 
@@ -1157,17 +1190,22 @@ static void sec_aead_callback(struct sec_ctx *c, struct sec_req *req, int err)
 
 	sec_free_req_id(req);
 
-	if (req->fake_busy)
-		a_req->base.complete(&a_req->base, -EINPROGRESS);
+	while (1) {
+		backlog_req = sec_back_req_clear(c, qp_ctx);
+		if (!backlog_req)
+			break;
+
+		backlog_aead_req = backlog_req->aead_req.aead_req;
+		backlog_aead_req->base.complete(&backlog_aead_req->base,
+						-EINPROGRESS);
+		atomic64_inc(&c->sec->debug.dfx.recv_busy_cnt);
+	}
 
 	a_req->base.complete(&a_req->base, err);
 }
 
 static void sec_request_uninit(struct sec_ctx *ctx, struct sec_req *req)
 {
-	struct sec_qp_ctx *qp_ctx = req->qp_ctx;
-
-	atomic_dec(&qp_ctx->pending_reqs);
 	sec_free_req_id(req);
 	sec_free_queue_id(ctx, req);
 }
@@ -1187,11 +1225,6 @@ static int sec_request_init(struct sec_ctx *ctx, struct sec_req *req)
 		return req->req_id;
 	}
 
-	if (ctx->fake_req_limit <= atomic_inc_return(&qp_ctx->pending_reqs))
-		req->fake_busy = true;
-	else
-		req->fake_busy = false;
-
 	return 0;
 }
 
diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c
index c2567cc..f9c1b7d 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -122,6 +122,7 @@ static struct sec_dfx_item sec_dfx_labels[] = {
 	{"send_cnt", offsetof(struct sec_dfx, send_cnt)},
 	{"recv_cnt", offsetof(struct sec_dfx, recv_cnt)},
 	{"send_busy_cnt", offsetof(struct sec_dfx, send_busy_cnt)},
+	{"recv_busy_cnt", offsetof(struct sec_dfx, recv_busy_cnt)},
 	{"err_bd_cnt", offsetof(struct sec_dfx, err_bd_cnt)},
 	{"invalid_req_cnt", offsetof(struct sec_dfx, invalid_req_cnt)},
 	{"done_flag_cnt", offsetof(struct sec_dfx, done_flag_cnt)},
-- 
2.8.1

Re: [PATCH 2/5] crypto:hisilicon/sec2 - update busy processing logic

[Herbert Xu]

On Fri, Jun 26, 2020 at 06:32:06PM +0800, Longfang Liu wrote:
> From: Kai Ye <yekai13@huawei.com>
> 
> As before, if a SEC queue is at the 'fake busy' status,
> the request with a 'fake busy' flag will be sent into hardware
> and the sending function returns busy. After the request is
> finished, SEC driver's call back will identify the 'fake busy' flag,
> and notifies the user that hardware is not busy now by calling
> user's call back function.
> 
> Now, a request sent into busy hardware will be cached in the
> SEC queue's backlog, return '-EBUSY' to user.
> After the request being finished, the cached requests will
> be processed in the call back function. to notify the
> corresponding user that SEC queue can process more requests.
> 
> Signed-off-by: Kai Ye <yekai13@huawei.com>
> Reviewed-by: Longfang Liu <liulongfang@huawei.com>

Why does this driver not take MAY_BACKLOG into account?

Cheers,
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

Re: [PATCH 2/5] crypto:hisilicon/sec2 - update busy processing logic

[liulongfang]

On 2020/7/3 12:14, Herbert Xu Wrote:
> On Fri, Jun 26, 2020 at 06:32:06PM +0800, Longfang Liu wrote:
>> From: Kai Ye <yekai13@huawei.com>
>>
>> As before, if a SEC queue is at the 'fake busy' status,
>> the request with a 'fake busy' flag will be sent into hardware
>> and the sending function returns busy. After the request is
>> finished, SEC driver's call back will identify the 'fake busy' flag,
>> and notifies the user that hardware is not busy now by calling
>> user's call back function.
>>
>> Now, a request sent into busy hardware will be cached in the
>> SEC queue's backlog, return '-EBUSY' to user.
>> After the request being finished, the cached requests will
>> be processed in the call back function. to notify the
>> corresponding user that SEC queue can process more requests.
>>
>> Signed-off-by: Kai Ye <yekai13@huawei.com>
>> Reviewed-by: Longfang Liu <liulongfang@huawei.com>
> Why does this driver not take MAY_BACKLOG into account?
>
> Cheers,

OK, I will apply MAY_BACKLOG in the next version soon.

thanks,

Longfang

.

[PATCH 3/5] crypto: hisilicon/sec2 - update SEC initialization and reset

[Longfang Liu]

Updates the initialization and reset of SEC driver's
register operation.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
---
 drivers/crypto/hisilicon/qm.h            |  1 +
 drivers/crypto/hisilicon/sec2/sec_main.c | 55 ++++++++++++++++----------------
 2 files changed, 29 insertions(+), 27 deletions(-)

diff --git a/drivers/crypto/hisilicon/qm.h b/drivers/crypto/hisilicon/qm.h
index 0a351de..6c1d3c7 100644
--- a/drivers/crypto/hisilicon/qm.h
+++ b/drivers/crypto/hisilicon/qm.h
@@ -44,6 +44,7 @@
 #define QM_AXI_M_CFG			0x1000ac
 #define AXI_M_CFG			0xffff
 #define QM_AXI_M_CFG_ENABLE		0x1000b0
+#define AM_CFG_SINGLE_PORT_MAX_TRANS	0x300014
 #define AXI_M_CFG_ENABLE		0xffffffff
 #define QM_PEH_AXUSER_CFG		0x1000cc
 #define QM_PEH_AXUSER_CFG_ENABLE	0x1000d0
diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c
index f9c1b7d..16bb3d7 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -22,11 +22,9 @@
 #define SEC_PF_PCI_DEVICE_ID		0xa255
 #define SEC_VF_PCI_DEVICE_ID		0xa256
 
-#define SEC_XTS_MIV_ENABLE_REG		0x301384
-#define SEC_XTS_MIV_ENABLE_MSK		0x7FFFFFFF
-#define SEC_XTS_MIV_DISABLE_MSK		0xFFFFFFFF
-#define SEC_BD_ERR_CHK_EN1		0xfffff7fd
-#define SEC_BD_ERR_CHK_EN2		0xffffbfff
+#define SEC_BD_ERR_CHK_EN0		0xEFFFFFFF
+#define SEC_BD_ERR_CHK_EN1		0x7ffff7fd
+#define SEC_BD_ERR_CHK_EN3		0xffffbfff
 
 #define SEC_SQE_SIZE			128
 #define SEC_SQ_SIZE			(SEC_SQE_SIZE * QM_Q_DEPTH)
@@ -47,17 +45,18 @@
 #define SEC_ECC_ADDR(err)			((err) >> 0)
 #define SEC_CORE_INT_DISABLE		0x0
 #define SEC_CORE_INT_ENABLE		0x1ff
+#define SEC_CORE_INT_CLEAR		0x1ff
+#define SEC_SAA_ENABLE			0x17f
 
-#define SEC_RAS_CE_REG			0x50
-#define SEC_RAS_FE_REG			0x54
-#define SEC_RAS_NFE_REG			0x58
+#define SEC_RAS_CE_REG			0x301050
+#define SEC_RAS_FE_REG			0x301054
+#define SEC_RAS_NFE_REG			0x301058
 #define SEC_RAS_CE_ENB_MSK		0x88
 #define SEC_RAS_FE_ENB_MSK		0x0
 #define SEC_RAS_NFE_ENB_MSK		0x177
 #define SEC_RAS_DISABLE			0x0
 #define SEC_MEM_START_INIT_REG		0x0100
 #define SEC_MEM_INIT_DONE_REG		0x0104
-#define SEC_QM_ABNORMAL_INT_MASK	0x100004
 
 #define SEC_CONTROL_REG			0x0200
 #define SEC_TRNG_EN_SHIFT		8
@@ -68,8 +67,10 @@
 
 #define SEC_INTERFACE_USER_CTRL0_REG	0x0220
 #define SEC_INTERFACE_USER_CTRL1_REG	0x0224
+#define SEC_SAA_EN_REG					0x0270
+#define SEC_BD_ERR_CHK_EN_REG0		0x0380
 #define SEC_BD_ERR_CHK_EN_REG1		0x0384
-#define SEC_BD_ERR_CHK_EN_REG2		0x038c
+#define SEC_BD_ERR_CHK_EN_REG3		0x038c
 
 #define SEC_USER0_SMMU_NORMAL		(BIT(23) | BIT(15))
 #define SEC_USER1_SMMU_NORMAL		(BIT(31) | BIT(23) | BIT(15) | BIT(7))
@@ -77,8 +78,8 @@
 
 #define SEC_DELAY_10_US			10
 #define SEC_POLL_TIMEOUT_US		1000
-#define SEC_VF_CNT_MASK			0xffffffc0
 #define SEC_DBGFS_VAL_MAX_LEN		20
+#define SEC_SINGLE_PORT_MAX_TRANS	0x2060
 
 #define SEC_SQE_MASK_OFFSET		64
 #define SEC_SQE_MASK_LEN		48
@@ -297,25 +298,25 @@ static int sec_engine_init(struct hisi_qm *qm)
 	reg |= SEC_USER1_SMMU_NORMAL;
 	writel_relaxed(reg, SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL1_REG));
 
+	writel(SEC_SINGLE_PORT_MAX_TRANS,
+	       qm->io_base + AM_CFG_SINGLE_PORT_MAX_TRANS);
+
+	writel(SEC_SAA_ENABLE, SEC_ADDR(qm, SEC_SAA_EN_REG));
+
+	/* Enable sm4 extra mode, as ctr/ecb */
+	writel_relaxed(SEC_BD_ERR_CHK_EN0,
+		       SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG0));
+	/* Enable sm4 xts mode multiple iv */
 	writel_relaxed(SEC_BD_ERR_CHK_EN1,
 		       SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG1));
-	writel_relaxed(SEC_BD_ERR_CHK_EN2,
-		       SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG2));
-
-	/* enable clock gate control */
-	reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG));
-	reg |= SEC_CLK_GATE_ENABLE;
-	writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG));
+	writel_relaxed(SEC_BD_ERR_CHK_EN3,
+		       SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG3));
 
 	/* config endian */
 	reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG));
 	reg |= sec_get_endian(qm);
 	writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG));
 
-	/* Enable sm4 xts mode multiple iv */
-	writel_relaxed(SEC_XTS_MIV_ENABLE_MSK,
-		       qm->io_base + SEC_XTS_MIV_ENABLE_REG);
-
 	return 0;
 }
 
@@ -374,10 +375,10 @@ static void sec_hw_error_enable(struct hisi_qm *qm)
 		return;
 	}
 
-	val = readl(qm->io_base + SEC_CONTROL_REG);
+	val = readl(SEC_ADDR(qm, SEC_CONTROL_REG));
 
 	/* clear SEC hw error source if having */
-	writel(SEC_CORE_INT_DISABLE, qm->io_base + SEC_CORE_INT_SOURCE);
+	writel(SEC_CORE_INT_CLEAR, qm->io_base + SEC_CORE_INT_SOURCE);
 
 	/* enable SEC hw error interrupts */
 	writel(SEC_CORE_INT_ENABLE, qm->io_base + SEC_CORE_INT_MASK);
@@ -390,14 +391,14 @@ static void sec_hw_error_enable(struct hisi_qm *qm)
 	/* enable SEC block master OOO when m-bit error occur */
 	val = val | SEC_AXI_SHUTDOWN_ENABLE;
 
-	writel(val, qm->io_base + SEC_CONTROL_REG);
+	writel(val, SEC_ADDR(qm, SEC_CONTROL_REG));
 }
 
 static void sec_hw_error_disable(struct hisi_qm *qm)
 {
 	u32 val;
 
-	val = readl(qm->io_base + SEC_CONTROL_REG);
+	val = readl(SEC_ADDR(qm, SEC_CONTROL_REG));
 
 	/* disable RAS int */
 	writel(SEC_RAS_DISABLE, qm->io_base + SEC_RAS_CE_REG);
@@ -410,7 +411,7 @@ static void sec_hw_error_disable(struct hisi_qm *qm)
 	/* disable SEC block master OOO when m-bit error occur */
 	val = val & SEC_AXI_SHUTDOWN_DISABLE;
 
-	writel(val, qm->io_base + SEC_CONTROL_REG);
+	writel(val, SEC_ADDR(qm, SEC_CONTROL_REG));
 }
 
 static u32 sec_current_qm_read(struct sec_debug_file *file)
-- 
2.8.1

[PATCH 4/5] crypto: hisilicon/sec2 - update debugfs interface parameters

[Longfang Liu]

Update debugfs interface parameters, and adjust the
processing logic inside the corresponding function

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
---
 drivers/crypto/hisilicon/sec2/sec_main.c | 54 ++++++++++++++++----------------
 1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c
index 16bb3d7..5bef3d8 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -586,16 +586,16 @@ static int sec_debugfs_atomic64_set(void *data, u64 val)
 DEFINE_DEBUGFS_ATTRIBUTE(sec_atomic64_ops, sec_debugfs_atomic64_get,
 			 sec_debugfs_atomic64_set, "%lld\n");
 
-static int sec_core_debug_init(struct sec_dev *sec)
+static int sec_core_debug_init(struct hisi_qm *qm)
 {
-	struct hisi_qm *qm = &sec->qm;
+	struct sec_dev *sec = container_of(qm, struct sec_dev, qm);
 	struct device *dev = &qm->pdev->dev;
 	struct sec_dfx *dfx = &sec->debug.dfx;
 	struct debugfs_regset32 *regset;
 	struct dentry *tmp_d;
 	int i;
 
-	tmp_d = debugfs_create_dir("sec_dfx", sec->qm.debug.debug_root);
+	tmp_d = debugfs_create_dir("sec_dfx", qm->debug.debug_root);
 
 	regset = devm_kzalloc(dev, sizeof(*regset), GFP_KERNEL);
 	if (!regset)
@@ -618,44 +618,44 @@ static int sec_core_debug_init(struct sec_dev *sec)
 	return 0;
 }
 
-static int sec_debug_init(struct sec_dev *sec)
+static int sec_debug_init(struct hisi_qm *qm)
 {
+	struct sec_dev *sec = container_of(qm, struct sec_dev, qm);
 	int i;
 
-	for (i = SEC_CURRENT_QM; i < SEC_DEBUG_FILE_NUM; i++) {
-		spin_lock_init(&sec->debug.files[i].lock);
-		sec->debug.files[i].index = i;
-		sec->debug.files[i].qm = &sec->qm;
-
-		debugfs_create_file(sec_dbg_file_name[i], 0600,
-				    sec->qm.debug.debug_root,
-				    sec->debug.files + i,
-				    &sec_dbg_fops);
+	if (qm->pdev->device == SEC_PF_PCI_DEVICE_ID) {
+		for (i = SEC_CURRENT_QM; i < SEC_DEBUG_FILE_NUM; i++) {
+			spin_lock_init(&sec->debug.files[i].lock);
+			sec->debug.files[i].index = i;
+			sec->debug.files[i].qm = qm;
+
+			debugfs_create_file(sec_dbg_file_name[i], 0600,
+						  qm->debug.debug_root,
+						  sec->debug.files + i,
+						  &sec_dbg_fops);
+		}
 	}
 
-	return sec_core_debug_init(sec);
+	return sec_core_debug_init(qm);
 }
 
-static int sec_debugfs_init(struct sec_dev *sec)
+static int sec_debugfs_init(struct hisi_qm *qm)
 {
-	struct hisi_qm *qm = &sec->qm;
 	struct device *dev = &qm->pdev->dev;
 	int ret;
 
 	qm->debug.debug_root = debugfs_create_dir(dev_name(dev),
 						  sec_debugfs_root);
-
 	qm->debug.sqe_mask_offset = SEC_SQE_MASK_OFFSET;
 	qm->debug.sqe_mask_len = SEC_SQE_MASK_LEN;
 	ret = hisi_qm_debug_init(qm);
 	if (ret)
 		goto failed_to_create;
 
-	if (qm->pdev->device == SEC_PF_PCI_DEVICE_ID) {
-		ret = sec_debug_init(sec);
-		if (ret)
-			goto failed_to_create;
-	}
+	ret = sec_debug_init(qm);
+	if (ret)
+		goto failed_to_create;
+
 
 	return 0;
 
@@ -665,9 +665,9 @@ static int sec_debugfs_init(struct sec_dev *sec)
 	return ret;
 }
 
-static void sec_debugfs_exit(struct sec_dev *sec)
+static void sec_debugfs_exit(struct hisi_qm *qm)
 {
-	debugfs_remove_recursive(sec->qm.debug.debug_root);
+	debugfs_remove_recursive(qm->debug.debug_root);
 }
 
 static void sec_log_hw_error(struct hisi_qm *qm, u32 err_sts)
@@ -877,7 +877,7 @@ static int sec_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err_probe_uninit;
 	}
 
-	ret = sec_debugfs_init(sec);
+	ret = sec_debugfs_init(qm);
 	if (ret)
 		pci_warn(pdev, "Failed to init debugfs!\n");
 
@@ -902,7 +902,7 @@ static int sec_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 err_remove_from_list:
 	hisi_qm_del_from_list(qm, &sec_devices);
-	sec_debugfs_exit(sec);
+	sec_debugfs_exit(qm);
 	hisi_qm_stop(qm);
 
 err_probe_uninit:
@@ -926,7 +926,7 @@ static void sec_remove(struct pci_dev *pdev)
 	if (qm->fun_type == QM_HW_PF && qm->vfs_num)
 		hisi_qm_sriov_disable(pdev);
 
-	sec_debugfs_exit(sec);
+	sec_debugfs_exit(qm);
 
 	(void)hisi_qm_stop(qm);
 
-- 
2.8.1

[PATCH 5/5] crypto: hisilicon/sec2 - fix some coding styles

[Longfang Liu]

Modify some log output interfaces and
update author information

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
---
 drivers/crypto/hisilicon/sec2/sec_main.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c
index 5bef3d8..90cd6b5 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -282,7 +282,7 @@ static int sec_engine_init(struct hisi_qm *qm)
 					 reg, reg & 0x1, SEC_DELAY_10_US,
 					 SEC_POLL_TIMEOUT_US);
 	if (ret) {
-		dev_err(&qm->pdev->dev, "fail to init sec mem\n");
+		pci_err(qm->pdev, "fail to init sec mem\n");
 		return ret;
 	}
 
@@ -371,7 +371,7 @@ static void sec_hw_error_enable(struct hisi_qm *qm)
 
 	if (qm->ver == QM_HW_V1) {
 		writel(SEC_CORE_INT_DISABLE, qm->io_base + SEC_CORE_INT_MASK);
-		dev_info(&qm->pdev->dev, "V1 not support hw error handle\n");
+		pci_info(qm->pdev, "V1 not support hw error handle\n");
 		return;
 	}
 
@@ -599,7 +599,7 @@ static int sec_core_debug_init(struct hisi_qm *qm)
 
 	regset = devm_kzalloc(dev, sizeof(*regset), GFP_KERNEL);
 	if (!regset)
-		return -ENOENT;
+		return -ENOMEM;
 
 	regset->regs = sec_dfx_regs;
 	regset->nregs = ARRAY_SIZE(sec_dfx_regs);
@@ -686,8 +686,6 @@ static void sec_log_hw_error(struct hisi_qm *qm, u32 err_sts)
 						SEC_CORE_SRAM_ECC_ERR_INFO);
 				dev_err(dev, "multi ecc sram num=0x%x\n",
 					SEC_ECC_NUM(err_val));
-				dev_err(dev, "multi ecc sram addr=0x%x\n",
-					SEC_ECC_ADDR(err_val));
 			}
 		}
 		errs++;
@@ -996,5 +994,6 @@ module_exit(sec_exit);
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Zaibo Xu <xuzaibo@huawei.com>");
 MODULE_AUTHOR("Longfang Liu <liulongfang@huawei.com>");
+MODULE_AUTHOR("Kai Ye <yekai13@huawei.com>");
 MODULE_AUTHOR("Wei Zhang <zhangwei375@huawei.com>");
 MODULE_DESCRIPTION("Driver for HiSilicon SEC accelerator");
-- 
2.8.1