Re: [PATCH Part2 v6 28/49] KVM: SVM: Add KVM_SEV_SNP_LAUNCH_FINISH command

[Jarkko Sakkinen <jarkko@kernel.org>]

On Mon, Jun 20, 2022 at 11:08:38PM +0000, Ashish Kalra wrote:
> From: Brijesh Singh <brijesh.singh@amd.com>
> 
> The KVM_SEV_SNP_LAUNCH_FINISH finalize the cryptographic digest and stores
> it as the measurement of the guest at launch.
> 
> While finalizing the launch flow, it also issues the LAUNCH_UPDATE command
> to encrypt the VMSA pages.

Nit: for completeness sake it would nice to fully conclude whether
LAUNCH_UPDATE is usable after LAUNCH_FINISH in this paragraph.

> 
> If its an SNP guest, then VMSA was added in the RMP entry as
> a guest owned page and also removed from the kernel direct map
> so flush it later after it is transitioned back to hypervisor
> state and restored in the direct map.
> 
> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
> ---
>  .../virt/kvm/x86/amd-memory-encryption.rst    |  22 ++++
>  arch/x86/kvm/svm/sev.c                        | 119 ++++++++++++++++++
>  include/uapi/linux/kvm.h                      |  14 +++
>  3 files changed, 155 insertions(+)
> 
> diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst
> index 62abd5c1f72b..750162cff87b 100644
> --- a/Documentation/virt/kvm/x86/amd-memory-encryption.rst
> +++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst
> @@ -514,6 +514,28 @@ Returns: 0 on success, -negative on error
>  See the SEV-SNP spec for further details on how to build the VMPL permission
>  mask and page type.
>  
> +21. KVM_SNP_LAUNCH_FINISH
> +-------------------------
> +
> +After completion of the SNP guest launch flow, the KVM_SNP_LAUNCH_FINISH command can be
> +issued to make the guest ready for the execution.

Some remark about LAUNCH_UPDATE post-LAUNCH_FINISH would be nice.

> +
> +Parameters (in): struct kvm_sev_snp_launch_finish
> +
> +Returns: 0 on success, -negative on error
> +
> +::
> +
> +        struct kvm_sev_snp_launch_finish {
> +                __u64 id_block_uaddr;
> +                __u64 id_auth_uaddr;
> +                __u8 id_block_en;
> +                __u8 auth_key_en;
> +                __u8 host_data[32];
> +        };
> +
> +
> +See SEV-SNP specification for further details on launch finish input parameters.
>  
>  References
>  ==========
> diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
> index a9461d352eda..a5b90469683f 100644
> --- a/arch/x86/kvm/svm/sev.c
> +++ b/arch/x86/kvm/svm/sev.c
> @@ -2095,6 +2095,106 @@ static int snp_launch_update(struct kvm *kvm, struct kvm_sev_cmd *argp)
>  	return ret;
>  }
>  
> +static int snp_launch_update_vmsa(struct kvm *kvm, struct kvm_sev_cmd *argp)
> +{
> +	struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
> +	struct sev_data_snp_launch_update data = {};
> +	int i, ret;
> +
> +	data.gctx_paddr = __psp_pa(sev->snp_context);
> +	data.page_type = SNP_PAGE_TYPE_VMSA;
> +
> +	for (i = 0; i < kvm->created_vcpus; i++) {
> +		struct vcpu_svm *svm = to_svm(xa_load(&kvm->vcpu_array, i));
> +		u64 pfn = __pa(svm->sev_es.vmsa) >> PAGE_SHIFT;
> +
> +		/* Perform some pre-encryption checks against the VMSA */
> +		ret = sev_es_sync_vmsa(svm);
> +		if (ret)
> +			return ret;
> +
> +		/* Transition the VMSA page to a firmware state. */
> +		ret = rmp_make_private(pfn, -1, PG_LEVEL_4K, sev->asid, true);
> +		if (ret)
> +			return ret;
> +
> +		/* Issue the SNP command to encrypt the VMSA */
> +		data.address = __sme_pa(svm->sev_es.vmsa);
> +		ret = __sev_issue_cmd(argp->sev_fd, SEV_CMD_SNP_LAUNCH_UPDATE,
> +				      &data, &argp->error);
> +		if (ret) {
> +			snp_page_reclaim(pfn);
> +			return ret;
> +		}
> +
> +		svm->vcpu.arch.guest_state_protected = true;
> +	}
> +
> +	return 0;
> +}
> +
> +static int snp_launch_finish(struct kvm *kvm, struct kvm_sev_cmd *argp)
> +{
> +	struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
> +	struct sev_data_snp_launch_finish *data;
> +	void *id_block = NULL, *id_auth = NULL;
> +	struct kvm_sev_snp_launch_finish params;

Nit: "params" should be the 2nd declaration (reverse
christmas tree order).

> +	int ret;
> +
> +	if (!sev_snp_guest(kvm))
> +		return -ENOTTY;
> +
> +	if (!sev->snp_context)
> +		return -EINVAL;
> +
> +	if (copy_from_user(&params, (void __user *)(uintptr_t)argp->data, sizeof(params)))
> +		return -EFAULT;
> +
> +	/* Measure all vCPUs using LAUNCH_UPDATE before we finalize the launch flow. */
> +	ret = snp_launch_update_vmsa(kvm, argp);
> +	if (ret)
> +		return ret;
> +
> +	data = kzalloc(sizeof(*data), GFP_KERNEL_ACCOUNT);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	if (params.id_block_en) {
> +		id_block = psp_copy_user_blob(params.id_block_uaddr, KVM_SEV_SNP_ID_BLOCK_SIZE);
> +		if (IS_ERR(id_block)) {
> +			ret = PTR_ERR(id_block);
> +			goto e_free;
> +		}
> +
> +		data->id_block_en = 1;
> +		data->id_block_paddr = __sme_pa(id_block);
> +	}
> +
> +	if (params.auth_key_en) {
> +		id_auth = psp_copy_user_blob(params.id_auth_uaddr, KVM_SEV_SNP_ID_AUTH_SIZE);
> +		if (IS_ERR(id_auth)) {
> +			ret = PTR_ERR(id_auth);
> +			goto e_free_id_block;
> +		}
> +
> +		data->auth_key_en = 1;
> +		data->id_auth_paddr = __sme_pa(id_auth);
> +	}
> +
> +	data->gctx_paddr = __psp_pa(sev->snp_context);
> +	ret = sev_issue_cmd(kvm, SEV_CMD_SNP_LAUNCH_FINISH, data, &argp->error);
> +
> +	kfree(id_auth);
> +
> +e_free_id_block:
> +	kfree(id_block);
> +
> +e_free:
> +	kfree(data);
> +
> +	return ret;
> +}
> +
>  int sev_mem_enc_ioctl(struct kvm *kvm, void __user *argp)
>  {
>  	struct kvm_sev_cmd sev_cmd;
> @@ -2191,6 +2291,9 @@ int sev_mem_enc_ioctl(struct kvm *kvm, void __user *argp)
>  	case KVM_SEV_SNP_LAUNCH_UPDATE:
>  		r = snp_launch_update(kvm, &sev_cmd);
>  		break;
> +	case KVM_SEV_SNP_LAUNCH_FINISH:
> +		r = snp_launch_finish(kvm, &sev_cmd);
> +		break;
>  	default:
>  		r = -EINVAL;
>  		goto out;
> @@ -2696,11 +2799,27 @@ void sev_free_vcpu(struct kvm_vcpu *vcpu)
>  
>  	svm = to_svm(vcpu);
>  
> +	/*
> +	 * If its an SNP guest, then VMSA was added in the RMP entry as
> +	 * a guest owned page. Transition the page to hypervisor state
> +	 * before releasing it back to the system.
> +	 * Also the page is removed from the kernel direct map, so flush it
> +	 * later after it is transitioned back to hypervisor state and
> +	 * restored in the direct map.
> +	 */
> +	if (sev_snp_guest(vcpu->kvm)) {
> +		u64 pfn = __pa(svm->sev_es.vmsa) >> PAGE_SHIFT;
> +
> +		if (host_rmp_make_shared(pfn, PG_LEVEL_4K, false))
> +			goto skip_vmsa_free;
> +	}
> +
>  	if (vcpu->arch.guest_state_protected)
>  		sev_flush_encrypted_page(vcpu, svm->sev_es.vmsa);
>  
>  	__free_page(virt_to_page(svm->sev_es.vmsa));
>  
> +skip_vmsa_free:
>  	if (svm->sev_es.ghcb_sa_free)
>  		kvfree(svm->sev_es.ghcb_sa);
>  }
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index 9b36b07414ea..5a4662716b6a 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -1814,6 +1814,7 @@ enum sev_cmd_id {
>  	KVM_SEV_SNP_INIT,
>  	KVM_SEV_SNP_LAUNCH_START,
>  	KVM_SEV_SNP_LAUNCH_UPDATE,
> +	KVM_SEV_SNP_LAUNCH_FINISH,
>  
>  	KVM_SEV_NR_MAX,
>  };
> @@ -1948,6 +1949,19 @@ struct kvm_sev_snp_launch_update {
>  	__u8 vmpl1_perms;
>  };
>  
> +#define KVM_SEV_SNP_ID_BLOCK_SIZE	96
> +#define KVM_SEV_SNP_ID_AUTH_SIZE	4096
> +#define KVM_SEV_SNP_FINISH_DATA_SIZE	32
> +
> +struct kvm_sev_snp_launch_finish {
> +	__u64 id_block_uaddr;
> +	__u64 id_auth_uaddr;
> +	__u8 id_block_en;
> +	__u8 auth_key_en;
> +	__u8 host_data[KVM_SEV_SNP_FINISH_DATA_SIZE];
> +	__u8 pad[6];
> +};
> +
>  #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
>  #define KVM_DEV_ASSIGN_PCI_2_3		(1 << 1)
>  #define KVM_DEV_ASSIGN_MASK_INTX	(1 << 2)
> -- 
> 2.25.1
> 

BR, Jarkko