From: guoren@kernel.org
To: marc.zyngier@arm.com, mark.rutland@arm.com, tglx@linutronix.de
Cc: linux-kernel@vger.kernel.org, jason@lakedaemon.net,
guoren@kernel.org, linux-csky@vger.kernel.org,
Guo Ren <ren_guo@c-sky.com>
Subject: [PATCH V4 1/4] irqchip/irq-csky-mpintc: Add triger type
Date: Tue, 4 Jun 2019 19:05:03 +0800 [thread overview]
Message-ID: <1559646306-18860-2-git-send-email-guoren@kernel.org> (raw)
In-Reply-To: <1559646306-18860-1-git-send-email-guoren@kernel.org>
From: Guo Ren <ren_guo@c-sky.com>
Support 4 triger types:
- IRQ_TYPE_LEVEL_HIGH
- IRQ_TYPE_LEVEL_LOW
- IRQ_TYPE_EDGE_RISING
- IRQ_TYPE_EDGE_FALLING
All of above could be set in DeviceTree file and it still compatible
with the old DeviceTree format.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
---
drivers/irqchip/irq-csky-mpintc.c | 80 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 78 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/irq-csky-mpintc.c b/drivers/irqchip/irq-csky-mpintc.c
index c67c961..a451a07 100644
--- a/drivers/irqchip/irq-csky-mpintc.c
+++ b/drivers/irqchip/irq-csky-mpintc.c
@@ -17,6 +17,7 @@
#include <asm/reg_ops.h>
static struct irq_domain *root_domain;
+
static void __iomem *INTCG_base;
static void __iomem *INTCL_base;
@@ -32,8 +33,8 @@ static void __iomem *INTCL_base;
#define INTCG_CIDSTR 0x1000
#define INTCL_PICTLR 0x0
+#define INTCL_CFGR 0x14
#define INTCL_SIGR 0x60
-#define INTCL_HPPIR 0x68
#define INTCL_RDYIR 0x6c
#define INTCL_SENR 0xa0
#define INTCL_CENR 0xa4
@@ -41,6 +42,35 @@ static void __iomem *INTCL_base;
static DEFINE_PER_CPU(void __iomem *, intcl_reg);
+static unsigned long *__trigger;
+
+#define IRQ_OFFSET(irq) ((irq < COMM_IRQ_BASE) ? irq : (irq - COMM_IRQ_BASE))
+
+#define TRIG_BYTE_OFFSET(i) ((((i) * 2) / 32) * 4)
+#define TRIG_BIT_OFFSET(i) (((i) * 2) % 32)
+
+#define TRIG_VAL(trigger, irq) (trigger << TRIG_BIT_OFFSET(IRQ_OFFSET(irq)))
+#define TRIG_VAL_MSK(irq) (~(3 << TRIG_BIT_OFFSET(IRQ_OFFSET(irq))))
+
+#define TRIG_BASE(irq) \
+ (TRIG_BYTE_OFFSET(IRQ_OFFSET(irq)) + ((irq < COMM_IRQ_BASE) ? \
+ (this_cpu_read(intcl_reg) + INTCL_CFGR) : (INTCG_base + INTCG_CICFGR)))
+
+static DEFINE_SPINLOCK(setup_lock);
+static void setup_trigger(unsigned long irq, unsigned long trigger)
+{
+ unsigned int tmp;
+
+ spin_lock(&setup_lock);
+
+ /* setup trigger */
+ tmp = readl_relaxed(TRIG_BASE(irq)) & TRIG_VAL_MSK(irq);
+
+ writel_relaxed(tmp | TRIG_VAL(trigger, irq), TRIG_BASE(irq));
+
+ spin_unlock(&setup_lock);
+}
+
static void csky_mpintc_handler(struct pt_regs *regs)
{
void __iomem *reg_base = this_cpu_read(intcl_reg);
@@ -56,6 +86,8 @@ static void csky_mpintc_enable(struct irq_data *d)
{
void __iomem *reg_base = this_cpu_read(intcl_reg);
+ setup_trigger(d->hwirq, __trigger[d->hwirq]);
+
writel_relaxed(d->hwirq, reg_base + INTCL_SENR);
}
@@ -73,6 +105,28 @@ static void csky_mpintc_eoi(struct irq_data *d)
writel_relaxed(d->hwirq, reg_base + INTCL_CACR);
}
+static int csky_mpintc_set_type(struct irq_data *d, unsigned int type)
+{
+ switch (type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ __trigger[d->hwirq] = 0;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ __trigger[d->hwirq] = 1;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ __trigger[d->hwirq] = 2;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ __trigger[d->hwirq] = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
#ifdef CONFIG_SMP
static int csky_irq_set_affinity(struct irq_data *d,
const struct cpumask *mask_val,
@@ -105,6 +159,7 @@ static struct irq_chip csky_irq_chip = {
.irq_eoi = csky_mpintc_eoi,
.irq_enable = csky_mpintc_enable,
.irq_disable = csky_mpintc_disable,
+ .irq_set_type = csky_mpintc_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = csky_irq_set_affinity,
#endif
@@ -125,9 +180,26 @@ static int csky_irqdomain_map(struct irq_domain *d, unsigned int irq,
return 0;
}
+static int csky_irq_domain_xlate_cells(struct irq_domain *d,
+ struct device_node *ctrlr, const u32 *intspec,
+ unsigned int intsize, unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ if (WARN_ON(intsize < 1))
+ return -EINVAL;
+
+ *out_hwirq = intspec[0];
+ if (intsize > 1)
+ *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+ else
+ *out_type = IRQ_TYPE_LEVEL_HIGH;
+
+ return 0;
+}
+
static const struct irq_domain_ops csky_irqdomain_ops = {
.map = csky_irqdomain_map,
- .xlate = irq_domain_xlate_onecell,
+ .xlate = csky_irq_domain_xlate_cells,
};
#ifdef CONFIG_SMP
@@ -161,6 +233,10 @@ csky_mpintc_init(struct device_node *node, struct device_node *parent)
if (ret < 0)
nr_irq = INTC_IRQS;
+ __trigger = kcalloc(nr_irq, sizeof(unsigned long), GFP_KERNEL);
+ if (__trigger == NULL)
+ return -ENXIO;
+
if (INTCG_base == NULL) {
INTCG_base = ioremap(mfcr("cr<31, 14>"),
INTCL_SIZE*nr_cpu_ids + INTCG_SIZE);
--
2.7.4
next prev parent reply other threads:[~2019-06-04 11:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-04 11:05 [PATCH V4 0/4] irqchip/irq-csky-mpintc: Update some features guoren
2019-06-04 11:05 ` guoren [this message]
2019-06-04 11:05 ` [PATCH V4 2/4] dt-bindings: interrupt-controller: Update csky mpintc guoren
2019-06-04 11:05 ` [PATCH V4 3/4] irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus guoren
2019-06-04 11:54 ` Marc Zyngier
2019-06-04 12:32 ` Guo Ren
2019-06-04 11:05 ` [PATCH V4 4/4] irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler guoren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1559646306-18860-2-git-send-email-guoren@kernel.org \
--to=guoren@kernel.org \
--cc=jason@lakedaemon.net \
--cc=linux-csky@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=ren_guo@c-sky.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).