Linux-csky Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 0/4] irqchip: dw-apb-ictl: support hierarchy irq domain
@ 2020-09-15  8:43 Zhen Lei
  2020-09-15  8:43 ` [PATCH v4 1/4] genirq: define an empty function set_handle_irq() if !GENERIC_IRQ_MULTI_HANDLER Zhen Lei
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: Zhen Lei @ 2020-09-15  8:43 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Rob Herring,
	Guo Ren, devicetree, linux-csky, linux-kernel
  Cc: Zhen Lei, Sebastian Hesselbarth, Haoyu Lv, Libin, Kefeng Wang,
	Jianguo Chen

v3 --> v4:
1. remove "gc->chip_types[0].chip.irq_eoi = irq_gc_noop;", the "chip.irq_eoi" hook
   is not needed by handle_level_irq(). Thanks for Marc Zyngier's review.
2. Add a new patch: define an empty function set_handle_irq() if !GENERIC_IRQ_MULTI_HANDLER
   to avoid compilation error on arch/arc system.

v2 --> v3:
1. change (1 << hwirq) to BIT(hwirq).
2. change __exception_irq_entry to __irq_entry, so we can "#include <linux/interrupt.h>"
   instead of "#include <asm/exception.h>". Ohterwise, an compilation error will be
   reported on arch/csky.
   drivers/irqchip/irq-dw-apb-ictl.c:20:10: fatal error: asm/exception.h: No such file or directory
3. use "if (!parent || (np == parent))" to determine whether it is primary interrupt controller.
4. make the primary interrupt controller case also use function handle_level_irq(), I used 
   handle_fasteoi_irq() as flow_handler before.
5. Other minor changes are not detailed.

v1 --> v2:
According to Marc Zyngier's suggestion, discard adding an independent SD5203-VIC
driver, but make the dw-apb-ictl irqchip driver to support hierarchy irq domain.
It was originally available only for secondary interrupt controller, now it can
also be used as primary interrupt controller. The related dt-bindings is updated
appropriately.

Add "Suggested-by: Marc Zyngier <maz@kernel.org>".
Add "Tested-by: Haoyu Lv <lvhaoyu@huawei.com>".


v1:
The interrupt controller of SD5203 SoC is VIC(vector interrupt controller), it's
based on Synopsys DesignWare APB interrupt controller (dw_apb_ictl) IP, but it
can not directly use dw_apb_ictl driver. The main reason is that VIC is used as
primary interrupt controller and dw_apb_ictl driver worked for secondary
interrupt controller. So add a new driver: "hisilicon,sd5203-vic".


Zhen Lei (4):
  genirq: define an empty function set_handle_irq() if
    !GENERIC_IRQ_MULTI_HANDLER
  irqchip: dw-apb-ictl: prepare for support hierarchy irq domain
  irqchip: dw-apb-ictl: support hierarchy irq domain
  dt-bindings: dw-apb-ictl: support hierarchy irq domain

 .../interrupt-controller/snps,dw-apb-ictl.txt      | 14 +++-
 drivers/irqchip/Kconfig                            |  2 +-
 drivers/irqchip/irq-dw-apb-ictl.c                  | 83 ++++++++++++++++++----
 include/linux/irq.h                                |  2 +
 4 files changed, 87 insertions(+), 14 deletions(-)

-- 
1.8.3



^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v4 1/4] genirq: define an empty function set_handle_irq() if !GENERIC_IRQ_MULTI_HANDLER
  2020-09-15  8:43 [PATCH v4 0/4] irqchip: dw-apb-ictl: support hierarchy irq domain Zhen Lei
@ 2020-09-15  8:43 ` Zhen Lei
  2020-09-17  3:46   ` Leizhen (ThunderTown)
  2020-09-15  8:43 ` [PATCH v4 2/4] irqchip: dw-apb-ictl: prepare for support hierarchy irq domain Zhen Lei
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 8+ messages in thread
From: Zhen Lei @ 2020-09-15  8:43 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Rob Herring,
	Guo Ren, devicetree, linux-csky, linux-kernel
  Cc: Zhen Lei, Sebastian Hesselbarth, Haoyu Lv, Libin, Kefeng Wang,
	Jianguo Chen

To avoid compilation error if an irqchip driver references the function
set_handle_irq() but may not select GENERIC_IRQ_MULTI_HANDLER on some
systems.

For example, the Synopsys DesignWare APB interrupt controller
(dw_apb_ictl) is used as the secondary interrupt controller on arc, csky,
arm64, and most arm32 SoCs, and it's also used as the primary interrupt
controller on Hisilicon SD5203 (an arm32 SoC). The latter need to use
set_handle_irq() to register the top-level IRQ handler, but this multi
irq handler registration mechanism is not implemented on arc system.

The input parameter "handle_irq" maybe defined as static and only
set_handle_irq() references it. This will trigger "defined but not used"
warning. So add "(void)handle_irq" to suppress it.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 include/linux/irq.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/irq.h b/include/linux/irq.h
index 1b7f4dfee35b397..0848a2aaa9b40b1 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -1252,6 +1252,8 @@ void irq_matrix_free(struct irq_matrix *m, unsigned int cpu,
  * top-level IRQ handler.
  */
 extern void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
+#else
+#define set_handle_irq(handle_irq)	do { (void)handle_irq; } while (0)
 #endif
 
 #endif /* _LINUX_IRQ_H */
-- 
1.8.3



^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v4 2/4] irqchip: dw-apb-ictl: prepare for support hierarchy irq domain
  2020-09-15  8:43 [PATCH v4 0/4] irqchip: dw-apb-ictl: support hierarchy irq domain Zhen Lei
  2020-09-15  8:43 ` [PATCH v4 1/4] genirq: define an empty function set_handle_irq() if !GENERIC_IRQ_MULTI_HANDLER Zhen Lei
@ 2020-09-15  8:43 ` Zhen Lei
  2020-09-15  8:43 ` [PATCH v4 3/4] irqchip: dw-apb-ictl: " Zhen Lei
  2020-09-15  8:43 ` [PATCH v4 4/4] dt-bindings: " Zhen Lei
  3 siblings, 0 replies; 8+ messages in thread
From: Zhen Lei @ 2020-09-15  8:43 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Rob Herring,
	Guo Ren, devicetree, linux-csky, linux-kernel
  Cc: Zhen Lei, Sebastian Hesselbarth, Haoyu Lv, Libin, Kefeng Wang,
	Jianguo Chen

Rename some functions and variables in advance, to make the next patch
looks more clear. The details are as follows:
1. rename dw_apb_ictl_handler() to dw_apb_ictl_handle_irq_cascaded().
2. change (1 << hwirq) to BIT(hwirq).

In function dw_apb_ictl_init():
1. rename local variable irq to parent_irq.
2. add "const struct irq_domain_ops *domain_ops = &irq_generic_chip_ops",
   then replace &irq_generic_chip_ops in other places with domain_ops.

No functional change.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Haoyu Lv <lvhaoyu@huawei.com>
---
 drivers/irqchip/irq-dw-apb-ictl.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/irqchip/irq-dw-apb-ictl.c b/drivers/irqchip/irq-dw-apb-ictl.c
index e4550e9c810ba94..5458004242e9d20 100644
--- a/drivers/irqchip/irq-dw-apb-ictl.c
+++ b/drivers/irqchip/irq-dw-apb-ictl.c
@@ -26,7 +26,7 @@
 #define APB_INT_FINALSTATUS_H	0x34
 #define APB_INT_BASE_OFFSET	0x04
 
-static void dw_apb_ictl_handler(struct irq_desc *desc)
+static void dw_apb_ictl_handle_irq_cascaded(struct irq_desc *desc)
 {
 	struct irq_domain *d = irq_desc_get_handler_data(desc);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -43,7 +43,7 @@ static void dw_apb_ictl_handler(struct irq_desc *desc)
 			u32 virq = irq_find_mapping(d, gc->irq_base + hwirq);
 
 			generic_handle_irq(virq);
-			stat &= ~(1 << hwirq);
+			stat &= ~BIT(hwirq);
 		}
 	}
 
@@ -73,12 +73,13 @@ static int __init dw_apb_ictl_init(struct device_node *np,
 	struct irq_domain *domain;
 	struct irq_chip_generic *gc;
 	void __iomem *iobase;
-	int ret, nrirqs, irq, i;
+	int ret, nrirqs, parent_irq, i;
 	u32 reg;
+	const struct irq_domain_ops *domain_ops = &irq_generic_chip_ops;
 
 	/* Map the parent interrupt for the chained handler */
-	irq = irq_of_parse_and_map(np, 0);
-	if (irq <= 0) {
+	parent_irq = irq_of_parse_and_map(np, 0);
+	if (parent_irq <= 0) {
 		pr_err("%pOF: unable to parse irq\n", np);
 		return -EINVAL;
 	}
@@ -120,8 +121,7 @@ static int __init dw_apb_ictl_init(struct device_node *np,
 	else
 		nrirqs = fls(readl_relaxed(iobase + APB_INT_ENABLE_L));
 
-	domain = irq_domain_add_linear(np, nrirqs,
-				       &irq_generic_chip_ops, NULL);
+	domain = irq_domain_add_linear(np, nrirqs, domain_ops, NULL);
 	if (!domain) {
 		pr_err("%pOF: unable to add irq domain\n", np);
 		ret = -ENOMEM;
@@ -146,7 +146,8 @@ static int __init dw_apb_ictl_init(struct device_node *np,
 		gc->chip_types[0].chip.irq_resume = dw_apb_ictl_resume;
 	}
 
-	irq_set_chained_handler_and_data(irq, dw_apb_ictl_handler, domain);
+	irq_set_chained_handler_and_data(parent_irq,
+				dw_apb_ictl_handle_irq_cascaded, domain);
 
 	return 0;
 
-- 
1.8.3



^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v4 3/4] irqchip: dw-apb-ictl: support hierarchy irq domain
  2020-09-15  8:43 [PATCH v4 0/4] irqchip: dw-apb-ictl: support hierarchy irq domain Zhen Lei
  2020-09-15  8:43 ` [PATCH v4 1/4] genirq: define an empty function set_handle_irq() if !GENERIC_IRQ_MULTI_HANDLER Zhen Lei
  2020-09-15  8:43 ` [PATCH v4 2/4] irqchip: dw-apb-ictl: prepare for support hierarchy irq domain Zhen Lei
@ 2020-09-15  8:43 ` Zhen Lei
  2020-09-15  8:43 ` [PATCH v4 4/4] dt-bindings: " Zhen Lei
  3 siblings, 0 replies; 8+ messages in thread
From: Zhen Lei @ 2020-09-15  8:43 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Rob Herring,
	Guo Ren, devicetree, linux-csky, linux-kernel
  Cc: Zhen Lei, Sebastian Hesselbarth, Haoyu Lv, Libin, Kefeng Wang,
	Jianguo Chen

Add support to use dw-apb-ictl as primary interrupt controller.

Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Haoyu Lv <lvhaoyu@huawei.com>
---
 drivers/irqchip/Kconfig           |  2 +-
 drivers/irqchip/irq-dw-apb-ictl.c | 74 ++++++++++++++++++++++++++++++++++-----
 2 files changed, 67 insertions(+), 9 deletions(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index bfc9719dbcdc31c..7c2d1c8fa551a66 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -148,7 +148,7 @@ config DAVINCI_CP_INTC
 config DW_APB_ICTL
 	bool
 	select GENERIC_IRQ_CHIP
-	select IRQ_DOMAIN
+	select IRQ_DOMAIN_HIERARCHY
 
 config FARADAY_FTINTC010
 	bool
diff --git a/drivers/irqchip/irq-dw-apb-ictl.c b/drivers/irqchip/irq-dw-apb-ictl.c
index 5458004242e9d20..418183b9983dfad 100644
--- a/drivers/irqchip/irq-dw-apb-ictl.c
+++ b/drivers/irqchip/irq-dw-apb-ictl.c
@@ -17,6 +17,7 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/interrupt.h>
 
 #define APB_INT_ENABLE_L	0x00
 #define APB_INT_ENABLE_H	0x04
@@ -26,6 +27,27 @@
 #define APB_INT_FINALSTATUS_H	0x34
 #define APB_INT_BASE_OFFSET	0x04
 
+/* irq domain of the primary interrupt controller. */
+static struct irq_domain *dw_apb_ictl_irq_domain;
+
+static void __irq_entry dw_apb_ictl_handle_irq(struct pt_regs *regs)
+{
+	struct irq_domain *d = dw_apb_ictl_irq_domain;
+	int n;
+
+	for (n = 0; n < d->revmap_size; n += 32) {
+		struct irq_chip_generic *gc = irq_get_domain_generic_chip(d, n);
+		u32 stat = readl_relaxed(gc->reg_base + APB_INT_FINALSTATUS_L);
+
+		while (stat) {
+			u32 hwirq = ffs(stat) - 1;
+
+			handle_domain_irq(d, hwirq, regs);
+			stat &= ~BIT(hwirq);
+		}
+	}
+}
+
 static void dw_apb_ictl_handle_irq_cascaded(struct irq_desc *desc)
 {
 	struct irq_domain *d = irq_desc_get_handler_data(desc);
@@ -50,6 +72,30 @@ static void dw_apb_ictl_handle_irq_cascaded(struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
+static int dw_apb_ictl_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+				unsigned int nr_irqs, void *arg)
+{
+	int i, ret;
+	irq_hw_number_t hwirq;
+	unsigned int type = IRQ_TYPE_NONE;
+	struct irq_fwspec *fwspec = arg;
+
+	ret = irq_domain_translate_onecell(domain, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++)
+		irq_map_generic_chip(domain, virq + i, hwirq + i);
+
+	return 0;
+}
+
+static const struct irq_domain_ops dw_apb_ictl_irq_domain_ops = {
+	.translate = irq_domain_translate_onecell,
+	.alloc = dw_apb_ictl_irq_domain_alloc,
+	.free = irq_domain_free_irqs_top,
+};
+
 #ifdef CONFIG_PM
 static void dw_apb_ictl_resume(struct irq_data *d)
 {
@@ -75,13 +121,20 @@ static int __init dw_apb_ictl_init(struct device_node *np,
 	void __iomem *iobase;
 	int ret, nrirqs, parent_irq, i;
 	u32 reg;
-	const struct irq_domain_ops *domain_ops = &irq_generic_chip_ops;
-
-	/* Map the parent interrupt for the chained handler */
-	parent_irq = irq_of_parse_and_map(np, 0);
-	if (parent_irq <= 0) {
-		pr_err("%pOF: unable to parse irq\n", np);
-		return -EINVAL;
+	const struct irq_domain_ops *domain_ops;
+
+	if (!parent || (np == parent)) {
+		/* It's used as the primary interrupt controller */
+		parent_irq = 0;
+		domain_ops = &dw_apb_ictl_irq_domain_ops;
+	} else {
+		/* Map the parent interrupt for the chained handler */
+		parent_irq = irq_of_parse_and_map(np, 0);
+		if (parent_irq <= 0) {
+			pr_err("%pOF: unable to parse irq\n", np);
+			return -EINVAL;
+		}
+		domain_ops = &irq_generic_chip_ops;
 	}
 
 	ret = of_address_to_resource(np, 0, &r);
@@ -146,8 +199,13 @@ static int __init dw_apb_ictl_init(struct device_node *np,
 		gc->chip_types[0].chip.irq_resume = dw_apb_ictl_resume;
 	}
 
-	irq_set_chained_handler_and_data(parent_irq,
+	if (parent_irq) {
+		irq_set_chained_handler_and_data(parent_irq,
 				dw_apb_ictl_handle_irq_cascaded, domain);
+	} else {
+		dw_apb_ictl_irq_domain = domain;
+		set_handle_irq(dw_apb_ictl_handle_irq);
+	}
 
 	return 0;
 
-- 
1.8.3



^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v4 4/4] dt-bindings: dw-apb-ictl: support hierarchy irq domain
  2020-09-15  8:43 [PATCH v4 0/4] irqchip: dw-apb-ictl: support hierarchy irq domain Zhen Lei
                   ` (2 preceding siblings ...)
  2020-09-15  8:43 ` [PATCH v4 3/4] irqchip: dw-apb-ictl: " Zhen Lei
@ 2020-09-15  8:43 ` Zhen Lei
  3 siblings, 0 replies; 8+ messages in thread
From: Zhen Lei @ 2020-09-15  8:43 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Rob Herring,
	Guo Ren, devicetree, linux-csky, linux-kernel
  Cc: Zhen Lei, Sebastian Hesselbarth, Haoyu Lv, Libin, Kefeng Wang,
	Jianguo Chen

Add support to use dw-apb-ictl as primary interrupt controller.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 .../bindings/interrupt-controller/snps,dw-apb-ictl.txt     | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
index 086ff08322db94f..2db59df9408f4c6 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
@@ -2,7 +2,8 @@ Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
 
 Synopsys DesignWare provides interrupt controller IP for APB known as
 dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
-APB bus, e.g. Marvell Armada 1500.
+APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt
+controller in some SoCs, e.g. Hisilicon SD5203.
 
 Required properties:
 - compatible: shall be "snps,dw-apb-ictl"
@@ -10,6 +11,8 @@ Required properties:
   region starting with ENABLE_LOW register
 - interrupt-controller: identifies the node as an interrupt controller
 - #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
+
+Additional required property when it's used as secondary interrupt controller:
 - interrupts: interrupt reference to primary interrupt controller
 
 The interrupt sources map to the corresponding bits in the interrupt
@@ -21,6 +24,7 @@ registers, i.e.
 - (optional) fast interrupts start at 64.
 
 Example:
+	/* dw_apb_ictl is used as secondary interrupt controller */
 	aic: interrupt-controller@3000 {
 		compatible = "snps,dw-apb-ictl";
 		reg = <0x3000 0xc00>;
@@ -29,3 +33,11 @@ Example:
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 	};
+
+	/* dw_apb_ictl is used as primary interrupt controller */
+	vic: interrupt-controller@10130000 {
+		compatible = "snps,dw-apb-ictl";
+		reg = <0x10130000 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
-- 
1.8.3



^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v4 1/4] genirq: define an empty function set_handle_irq() if !GENERIC_IRQ_MULTI_HANDLER
  2020-09-15  8:43 ` [PATCH v4 1/4] genirq: define an empty function set_handle_irq() if !GENERIC_IRQ_MULTI_HANDLER Zhen Lei
@ 2020-09-17  3:46   ` Leizhen (ThunderTown)
  2020-09-17  9:32     ` Marc Zyngier
  0 siblings, 1 reply; 8+ messages in thread
From: Leizhen (ThunderTown) @ 2020-09-17  3:46 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier, Rob Herring,
	Guo Ren, devicetree, linux-csky, linux-kernel
  Cc: Sebastian Hesselbarth, Haoyu Lv, Libin, Kefeng Wang, Jianguo Chen



On 2020/9/15 16:43, Zhen Lei wrote:
> To avoid compilation error if an irqchip driver references the function
> set_handle_irq() but may not select GENERIC_IRQ_MULTI_HANDLER on some
> systems.

Hi, Marc:
  Do you agree with this method?

  Otherwise, I should use "#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER ... #endif"
to perform the compilation isolation. This may make the code less beautiful.

> 
> For example, the Synopsys DesignWare APB interrupt controller
> (dw_apb_ictl) is used as the secondary interrupt controller on arc, csky,
> arm64, and most arm32 SoCs, and it's also used as the primary interrupt
> controller on Hisilicon SD5203 (an arm32 SoC). The latter need to use
> set_handle_irq() to register the top-level IRQ handler, but this multi
> irq handler registration mechanism is not implemented on arc system.
> 
> The input parameter "handle_irq" maybe defined as static and only
> set_handle_irq() references it. This will trigger "defined but not used"
> warning. So add "(void)handle_irq" to suppress it.
> 
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
>  include/linux/irq.h | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/include/linux/irq.h b/include/linux/irq.h
> index 1b7f4dfee35b397..0848a2aaa9b40b1 100644
> --- a/include/linux/irq.h
> +++ b/include/linux/irq.h
> @@ -1252,6 +1252,8 @@ void irq_matrix_free(struct irq_matrix *m, unsigned int cpu,
>   * top-level IRQ handler.
>   */
>  extern void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
> +#else
> +#define set_handle_irq(handle_irq)	do { (void)handle_irq; } while (0)
>  #endif
>  
>  #endif /* _LINUX_IRQ_H */
> 


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v4 1/4] genirq: define an empty function set_handle_irq() if !GENERIC_IRQ_MULTI_HANDLER
  2020-09-17  3:46   ` Leizhen (ThunderTown)
@ 2020-09-17  9:32     ` Marc Zyngier
  2020-09-17  9:47       ` Leizhen (ThunderTown)
  0 siblings, 1 reply; 8+ messages in thread
From: Marc Zyngier @ 2020-09-17  9:32 UTC (permalink / raw)
  To: Leizhen (ThunderTown)
  Cc: Thomas Gleixner, Jason Cooper, Rob Herring, Guo Ren, devicetree,
	linux-csky, linux-kernel, Sebastian Hesselbarth, Haoyu Lv, Libin,
	Kefeng Wang, Jianguo Chen

On 2020-09-17 04:46, Leizhen (ThunderTown) wrote:
> On 2020/9/15 16:43, Zhen Lei wrote:
>> To avoid compilation error if an irqchip driver references the 
>> function
>> set_handle_irq() but may not select GENERIC_IRQ_MULTI_HANDLER on some
>> systems.
> 
> Hi, Marc:
>   Do you agree with this method?
> 
>   Otherwise, I should use "#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER ... 
> #endif"
> to perform the compilation isolation. This may make the code less 
> beautiful.
> 
>> 
>> For example, the Synopsys DesignWare APB interrupt controller
>> (dw_apb_ictl) is used as the secondary interrupt controller on arc, 
>> csky,
>> arm64, and most arm32 SoCs, and it's also used as the primary 
>> interrupt
>> controller on Hisilicon SD5203 (an arm32 SoC). The latter need to use
>> set_handle_irq() to register the top-level IRQ handler, but this multi
>> irq handler registration mechanism is not implemented on arc system.
>> 
>> The input parameter "handle_irq" maybe defined as static and only
>> set_handle_irq() references it. This will trigger "defined but not 
>> used"
>> warning. So add "(void)handle_irq" to suppress it.
>> 
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>>  include/linux/irq.h | 2 ++
>>  1 file changed, 2 insertions(+)
>> 
>> diff --git a/include/linux/irq.h b/include/linux/irq.h
>> index 1b7f4dfee35b397..0848a2aaa9b40b1 100644
>> --- a/include/linux/irq.h
>> +++ b/include/linux/irq.h
>> @@ -1252,6 +1252,8 @@ void irq_matrix_free(struct irq_matrix *m, 
>> unsigned int cpu,
>>   * top-level IRQ handler.
>>   */
>>  extern void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
>> +#else
>> +#define set_handle_irq(handle_irq)	do { (void)handle_irq; } while (0)
>>  #endif
>> 
>>  #endif /* _LINUX_IRQ_H */
>> 

You shouldn't just make it a NOP. Consider adding a WARN_ON(1), so that
people can realize this cannot work without the required architecture 
support.

         M.
-- 
Jazz is not dead. It just smells funny...

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v4 1/4] genirq: define an empty function set_handle_irq() if !GENERIC_IRQ_MULTI_HANDLER
  2020-09-17  9:32     ` Marc Zyngier
@ 2020-09-17  9:47       ` Leizhen (ThunderTown)
  0 siblings, 0 replies; 8+ messages in thread
From: Leizhen (ThunderTown) @ 2020-09-17  9:47 UTC (permalink / raw)
  To: Marc Zyngier
  Cc: Thomas Gleixner, Jason Cooper, Rob Herring, Guo Ren, devicetree,
	linux-csky, linux-kernel, Sebastian Hesselbarth, Haoyu Lv, Libin,
	Kefeng Wang, Jianguo Chen



On 2020/9/17 17:32, Marc Zyngier wrote:
> On 2020-09-17 04:46, Leizhen (ThunderTown) wrote:
>> On 2020/9/15 16:43, Zhen Lei wrote:
>>> To avoid compilation error if an irqchip driver references the function
>>> set_handle_irq() but may not select GENERIC_IRQ_MULTI_HANDLER on some
>>> systems.
>>
>> Hi, Marc:
>>   Do you agree with this method?
>>
>>   Otherwise, I should use "#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER ... #endif"
>> to perform the compilation isolation. This may make the code less beautiful.
>>
>>>
>>> For example, the Synopsys DesignWare APB interrupt controller
>>> (dw_apb_ictl) is used as the secondary interrupt controller on arc, csky,
>>> arm64, and most arm32 SoCs, and it's also used as the primary interrupt
>>> controller on Hisilicon SD5203 (an arm32 SoC). The latter need to use
>>> set_handle_irq() to register the top-level IRQ handler, but this multi
>>> irq handler registration mechanism is not implemented on arc system.
>>>
>>> The input parameter "handle_irq" maybe defined as static and only
>>> set_handle_irq() references it. This will trigger "defined but not used"
>>> warning. So add "(void)handle_irq" to suppress it.
>>>
>>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>>> ---
>>>  include/linux/irq.h | 2 ++
>>>  1 file changed, 2 insertions(+)
>>>
>>> diff --git a/include/linux/irq.h b/include/linux/irq.h
>>> index 1b7f4dfee35b397..0848a2aaa9b40b1 100644
>>> --- a/include/linux/irq.h
>>> +++ b/include/linux/irq.h
>>> @@ -1252,6 +1252,8 @@ void irq_matrix_free(struct irq_matrix *m, unsigned int cpu,
>>>   * top-level IRQ handler.
>>>   */
>>>  extern void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
>>> +#else
>>> +#define set_handle_irq(handle_irq)    do { (void)handle_irq; } while (0)
>>>  #endif
>>>
>>>  #endif /* _LINUX_IRQ_H */
>>>
> 
> You shouldn't just make it a NOP. Consider adding a WARN_ON(1), so that
> people can realize this cannot work without the required architecture support.

Oh, right. I will add it.

> 
>         M.


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-15  8:43 [PATCH v4 0/4] irqchip: dw-apb-ictl: support hierarchy irq domain Zhen Lei
2020-09-15  8:43 ` [PATCH v4 1/4] genirq: define an empty function set_handle_irq() if !GENERIC_IRQ_MULTI_HANDLER Zhen Lei
2020-09-17  3:46   ` Leizhen (ThunderTown)
2020-09-17  9:32     ` Marc Zyngier
2020-09-17  9:47       ` Leizhen (ThunderTown)
2020-09-15  8:43 ` [PATCH v4 2/4] irqchip: dw-apb-ictl: prepare for support hierarchy irq domain Zhen Lei
2020-09-15  8:43 ` [PATCH v4 3/4] irqchip: dw-apb-ictl: " Zhen Lei
2020-09-15  8:43 ` [PATCH v4 4/4] dt-bindings: " Zhen Lei

Linux-csky Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-csky/0 linux-csky/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-csky linux-csky/ https://lore.kernel.org/linux-csky \
		linux-csky@vger.kernel.org
	public-inbox-index linux-csky

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-csky


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git