Linux-csky Archive on
 help / color / Atom feed
From: Randy Dunlap <>
To: LKML <>,
Cc: Thomas Gleixner <>,
	Jason Cooper <>,
	Marc Zyngier <>, Guo Ren <>
Subject: [PATCH] irqchip: cleanup Kconfig help text
Date: Thu, 28 Nov 2019 14:42:29 -0800
Message-ID: <> (raw)

From: Randy Dunlap <>

Fixes to Kconfig help text:

- spell out "hardware"
- fix verb usage

Signed-off-by: Randy Dunlap <>
Cc: Thomas Gleixner <>
Cc: Jason Cooper <>
Cc: Marc Zyngier <>
Cc: Guo Ren <>
 drivers/irqchip/Kconfig |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- lnx-54.orig/drivers/irqchip/Kconfig
+++ lnx-54/drivers/irqchip/Kconfig
@@ -434,7 +434,7 @@ config CSKY_MPINTC
 	  Say yes here to enable C-SKY SMP interrupt controller driver used
 	  for C-SKY SMP system.
-	  In fact it's not mmio map in hw and it use ld/st to visit the
+	  In fact it's not mmio map in hardware and it uses ld/st to visit the
 	  controller's register inside CPU.
@@ -442,7 +442,7 @@ config CSKY_APB_INTC
 	depends on CSKY
 	  Say yes here to enable C-SKY APB interrupt controller driver used
-	  by C-SKY single core SOC system. It use mmio map apb-bus to visit
+	  by C-SKY single core SOC system. It uses mmio map apb-bus to visit
 	  the controller's register.

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-28 22:42 Randy Dunlap [this message]
2019-11-29 11:27 ` Guo Ren

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-csky Archive on

Archives are clonable:
	git clone --mirror linux-csky/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-csky linux-csky/ \
	public-inbox-index linux-csky

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone