From: Dan Williams <dan.j.williams@intel.com>
To: linux-cxl@vger.kernel.org
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>,
linux-pci@vger.kernel.org, nvdimm@lists.linux.dev
Subject: [PATCH v5 32/40] cxl/core/port: Add switch port enumeration
Date: Fri, 04 Feb 2022 07:08:40 -0800 [thread overview]
Message-ID: <164398731146.902644.1029761300481366248.stgit@dwillia2-desk3.amr.corp.intel.com> (raw)
In-Reply-To: <164382166570.690900.541361103681784580.stgit@dwillia2-desk3.amr.corp.intel.com>
So far the platorm level CXL resources have been enumerated by the
cxl_acpi driver, and cxl_pci has gathered all the pre-requisite
information it needs to fire up a cxl_mem driver. However, the first
thing the cxl_mem driver will be tasked to do is validate that all the
PCIe Switches in its ancestry also have CXL capabilities and an CXL.mem
link established.
Provide a common mechanism for a CXL.mem endpoint driver to enumerate
all the ancestor CXL ports in the topology and validate CXL.mem
connectivity.
Multiple endpoints may end up racing to establish a shared port in the
topology. This race is resolved via taking the device-lock on a parent
CXL Port before establishing a new child. The winner of the race
establishes the port, the loser simply registers its interest in the
port via 'struct cxl_ep' place-holder reference.
At endpoint teardown the same parent port lock is taken as 'struct
cxl_ep' references are deleted. Last endpoint to drop its reference
unregisters the port.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
Changes since v4:
- Drop cxl_bus_rescan() declaration (Jonathan)
- Drop cxl_mem_find_port() altogether, only the next patch needs it,
apologies for the thrash. (Jonathan)
drivers/cxl/acpi.c | 17 --
drivers/cxl/core/port.c | 427 ++++++++++++++++++++++++++++++++++++++++++++++-
drivers/cxl/cxl.h | 19 ++
3 files changed, 438 insertions(+), 25 deletions(-)
diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
index 683f2ca32c97..7bd53dc691ec 100644
--- a/drivers/cxl/acpi.c
+++ b/drivers/cxl/acpi.c
@@ -130,21 +130,6 @@ static int cxl_parse_cfmws(union acpi_subtable_headers *header, void *arg,
return 0;
}
-static struct cxl_dport *find_dport_by_dev(struct cxl_port *port, struct device *dev)
-{
- struct cxl_dport *dport;
-
- cxl_device_lock(&port->dev);
- list_for_each_entry(dport, &port->dports, list)
- if (dport->dport == dev) {
- cxl_device_unlock(&port->dev);
- return dport;
- }
-
- cxl_device_unlock(&port->dev);
- return NULL;
-}
-
__mock struct acpi_device *to_cxl_host_bridge(struct device *host,
struct device *dev)
{
@@ -175,7 +160,7 @@ static int add_host_bridge_uport(struct device *match, void *arg)
if (!bridge)
return 0;
- dport = find_dport_by_dev(root_port, match);
+ dport = cxl_find_dport_by_dev(root_port, match);
if (!dport) {
dev_dbg(host, "host bridge expected and not found\n");
return 0;
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 62b9f5dc64b5..c5779c982c80 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -7,6 +7,7 @@
#include <linux/slab.h>
#include <linux/idr.h>
#include <cxlmem.h>
+#include <cxlpci.h>
#include <cxl.h>
#include "core.h"
@@ -265,10 +266,24 @@ struct cxl_decoder *to_cxl_decoder(struct device *dev)
}
EXPORT_SYMBOL_NS_GPL(to_cxl_decoder, CXL);
+static void cxl_ep_release(struct cxl_ep *ep)
+{
+ if (!ep)
+ return;
+ list_del(&ep->list);
+ put_device(ep->ep);
+ kfree(ep);
+}
+
static void cxl_port_release(struct device *dev)
{
struct cxl_port *port = to_cxl_port(dev);
+ struct cxl_ep *ep, *_e;
+ cxl_device_lock(dev);
+ list_for_each_entry_safe(ep, _e, &port->endpoints, list)
+ cxl_ep_release(ep);
+ cxl_device_unlock(dev);
ida_free(&cxl_port_ida, port->id);
kfree(port);
}
@@ -359,6 +374,7 @@ static struct cxl_port *cxl_port_alloc(struct device *uport,
port->component_reg_phys = component_reg_phys;
ida_init(&port->decoder_ida);
INIT_LIST_HEAD(&port->dports);
+ INIT_LIST_HEAD(&port->endpoints);
device_initialize(dev);
device_set_pm_not_required(dev);
@@ -457,25 +473,36 @@ int devm_cxl_register_pci_bus(struct device *host, struct device *uport,
}
EXPORT_SYMBOL_NS_GPL(devm_cxl_register_pci_bus, CXL);
-/* Find a 2nd level CXL port that has a dport that is an ancestor of @match */
-static int match_root_child(struct device *dev, const void *match)
+static bool dev_is_cxl_root_child(struct device *dev)
{
- const struct device *iter = NULL;
struct cxl_port *port, *parent;
- struct cxl_dport *dport;
if (!is_cxl_port(dev))
- return 0;
+ return false;
port = to_cxl_port(dev);
if (is_cxl_root(port))
- return 0;
+ return false;
parent = to_cxl_port(port->dev.parent);
- if (!is_cxl_root(parent))
+ if (is_cxl_root(parent))
+ return true;
+
+ return false;
+}
+
+/* Find a 2nd level CXL port that has a dport that is an ancestor of @match */
+static int match_root_child(struct device *dev, const void *match)
+{
+ const struct device *iter = NULL;
+ struct cxl_dport *dport;
+ struct cxl_port *port;
+
+ if (!dev_is_cxl_root_child(dev))
return 0;
- cxl_device_lock(&port->dev);
+ port = to_cxl_port(dev);
+ cxl_device_lock(dev);
list_for_each_entry(dport, &port->dports, list) {
iter = match;
while (iter) {
@@ -485,7 +512,7 @@ static int match_root_child(struct device *dev, const void *match)
}
}
out:
- cxl_device_unlock(&port->dev);
+ cxl_device_unlock(dev);
return !!iter;
}
@@ -642,6 +669,388 @@ struct cxl_dport *devm_cxl_add_dport(struct cxl_port *port,
}
EXPORT_SYMBOL_NS_GPL(devm_cxl_add_dport, CXL);
+static struct cxl_ep *find_ep(struct cxl_port *port, struct device *ep_dev)
+{
+ struct cxl_ep *ep;
+
+ device_lock_assert(&port->dev);
+ list_for_each_entry(ep, &port->endpoints, list)
+ if (ep->ep == ep_dev)
+ return ep;
+ return NULL;
+}
+
+static int add_ep(struct cxl_port *port, struct cxl_ep *new)
+{
+ struct cxl_ep *dup;
+
+ cxl_device_lock(&port->dev);
+ if (port->dead) {
+ cxl_device_unlock(&port->dev);
+ return -ENXIO;
+ }
+ dup = find_ep(port, new->ep);
+ if (!dup)
+ list_add_tail(&new->list, &port->endpoints);
+ cxl_device_unlock(&port->dev);
+
+ return dup ? -EEXIST : 0;
+}
+
+/**
+ * cxl_add_ep - register an endpoint's interest in a port
+ * @port: a port in the endpoint's topology ancestry
+ * @ep_dev: device representing the endpoint
+ *
+ * Intermediate CXL ports are scanned based on the arrival of endpoints.
+ * When those endpoints depart the port can be destroyed once all
+ * endpoints that care about that port have been removed.
+ */
+static int cxl_add_ep(struct cxl_port *port, struct device *ep_dev)
+{
+ struct cxl_ep *ep;
+ int rc;
+
+ ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ if (!ep)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&ep->list);
+ ep->ep = get_device(ep_dev);
+
+ rc = add_ep(port, ep);
+ if (rc)
+ cxl_ep_release(ep);
+ return rc;
+}
+
+struct cxl_find_port_ctx {
+ const struct device *dport_dev;
+ const struct cxl_port *parent_port;
+};
+
+static int match_port_by_dport(struct device *dev, const void *data)
+{
+ const struct cxl_find_port_ctx *ctx = data;
+ struct cxl_port *port;
+
+ if (!is_cxl_port(dev))
+ return 0;
+ if (ctx->parent_port && dev->parent != &ctx->parent_port->dev)
+ return 0;
+
+ port = to_cxl_port(dev);
+ return cxl_find_dport_by_dev(port, ctx->dport_dev) != NULL;
+}
+
+static struct cxl_port *__find_cxl_port(struct cxl_find_port_ctx *ctx)
+{
+ struct device *dev;
+
+ if (!ctx->dport_dev)
+ return NULL;
+
+ dev = bus_find_device(&cxl_bus_type, NULL, ctx, match_port_by_dport);
+ if (dev)
+ return to_cxl_port(dev);
+ return NULL;
+}
+
+static struct cxl_port *find_cxl_port(struct device *dport_dev)
+{
+ struct cxl_find_port_ctx ctx = {
+ .dport_dev = dport_dev,
+ };
+
+ return __find_cxl_port(&ctx);
+}
+
+static struct cxl_port *find_cxl_port_at(struct cxl_port *parent_port,
+ struct device *dport_dev)
+{
+ struct cxl_find_port_ctx ctx = {
+ .dport_dev = dport_dev,
+ .parent_port = parent_port,
+ };
+
+ return __find_cxl_port(&ctx);
+}
+
+/*
+ * All users of grandparent() are using it to walk PCIe-like swich port
+ * hierarchy. A PCIe switch is comprised of a bridge device representing the
+ * upstream switch port and N bridges representing downstream switch ports. When
+ * bridges stack the grand-parent of a downstream switch port is another
+ * downstream switch port in the immediate ancestor switch.
+ */
+static struct device *grandparent(struct device *dev)
+{
+ if (dev && dev->parent)
+ return dev->parent->parent;
+ return NULL;
+}
+
+/*
+ * The natural end of life of a non-root 'cxl_port' is when its parent port goes
+ * through a ->remove() event ("top-down" unregistration). The unnatural trigger
+ * for a port to be unregistered is when all memdevs beneath that port have gone
+ * through ->remove(). This "bottom-up" removal selectively removes individual
+ * child ports manually. This depends on devm_cxl_add_port() to not change is
+ * devm action registration order.
+ */
+static void delete_switch_port(struct cxl_port *port, struct list_head *dports)
+{
+ struct cxl_dport *dport, *_d;
+
+ list_for_each_entry_safe(dport, _d, dports, list) {
+ devm_release_action(&port->dev, cxl_dport_unlink, dport);
+ devm_release_action(&port->dev, cxl_dport_remove, dport);
+ devm_kfree(&port->dev, dport);
+ }
+ devm_release_action(port->dev.parent, cxl_unlink_uport, port);
+ devm_release_action(port->dev.parent, unregister_port, port);
+}
+
+static void cxl_detach_ep(void *data)
+{
+ struct cxl_memdev *cxlmd = data;
+ struct device *iter;
+
+ for (iter = &cxlmd->dev; iter; iter = grandparent(iter)) {
+ struct device *dport_dev = grandparent(iter);
+ struct cxl_port *port, *parent_port;
+ LIST_HEAD(reap_dports);
+ struct cxl_ep *ep;
+
+ if (!dport_dev)
+ break;
+
+ port = find_cxl_port(dport_dev);
+ if (!port || is_cxl_root(port)) {
+ put_device(&port->dev);
+ continue;
+ }
+
+ parent_port = to_cxl_port(port->dev.parent);
+ cxl_device_lock(&parent_port->dev);
+ if (!parent_port->dev.driver) {
+ /*
+ * The bottom-up race to delete the port lost to a
+ * top-down port disable, give up here, because the
+ * parent_port ->remove() will have cleaned up all
+ * descendants.
+ */
+ cxl_device_unlock(&parent_port->dev);
+ put_device(&port->dev);
+ continue;
+ }
+
+ cxl_device_lock(&port->dev);
+ ep = find_ep(port, &cxlmd->dev);
+ dev_dbg(&cxlmd->dev, "disconnect %s from %s\n",
+ ep ? dev_name(ep->ep) : "", dev_name(&port->dev));
+ cxl_ep_release(ep);
+ if (ep && !port->dead && list_empty(&port->endpoints) &&
+ !is_cxl_root(parent_port)) {
+ /*
+ * This was the last ep attached to a dynamically
+ * enumerated port. Block new cxl_add_ep() and garbage
+ * collect the port.
+ */
+ port->dead = true;
+ list_splice_init(&port->dports, &reap_dports);
+ }
+ cxl_device_unlock(&port->dev);
+
+ if (!list_empty(&reap_dports)) {
+ dev_dbg(&cxlmd->dev, "delete %s\n",
+ dev_name(&port->dev));
+ delete_switch_port(port, &reap_dports);
+ }
+ put_device(&port->dev);
+ cxl_device_unlock(&parent_port->dev);
+ }
+}
+
+static resource_size_t find_component_registers(struct device *dev)
+{
+ struct cxl_register_map map;
+ struct pci_dev *pdev;
+
+ /*
+ * Theoretically, CXL component registers can be hosted on a
+ * non-PCI device, in practice, only cxl_test hits this case.
+ */
+ if (!dev_is_pci(dev))
+ return CXL_RESOURCE_NONE;
+
+ pdev = to_pci_dev(dev);
+
+ cxl_find_regblock(pdev, CXL_REGLOC_RBI_COMPONENT, &map);
+ return cxl_regmap_to_base(pdev, &map);
+}
+
+static int add_port_attach_ep(struct cxl_memdev *cxlmd,
+ struct device *uport_dev,
+ struct device *dport_dev)
+{
+ struct device *dparent = grandparent(dport_dev);
+ struct cxl_port *port, *parent_port = NULL;
+ resource_size_t component_reg_phys;
+ int rc;
+
+ if (!dparent) {
+ /*
+ * The iteration reached the topology root without finding the
+ * CXL-root 'cxl_port' on a previous iteration, fail for now to
+ * be re-probed after platform driver attaches.
+ */
+ dev_dbg(&cxlmd->dev, "%s is a root dport\n",
+ dev_name(dport_dev));
+ return -ENXIO;
+ }
+
+ parent_port = find_cxl_port(dparent);
+ if (!parent_port) {
+ /* iterate to create this parent_port */
+ return -EAGAIN;
+ }
+
+ cxl_device_lock(&parent_port->dev);
+ if (!parent_port->dev.driver) {
+ dev_warn(&cxlmd->dev,
+ "port %s:%s disabled, failed to enumerate CXL.mem\n",
+ dev_name(&parent_port->dev), dev_name(uport_dev));
+ port = ERR_PTR(-ENXIO);
+ goto out;
+ }
+
+ port = find_cxl_port_at(parent_port, dport_dev);
+ if (!port) {
+ component_reg_phys = find_component_registers(uport_dev);
+ port = devm_cxl_add_port(&parent_port->dev, uport_dev,
+ component_reg_phys, parent_port);
+ if (!IS_ERR(port))
+ get_device(&port->dev);
+ }
+out:
+ cxl_device_unlock(&parent_port->dev);
+
+ if (IS_ERR(port))
+ rc = PTR_ERR(port);
+ else {
+ dev_dbg(&cxlmd->dev, "add to new port %s:%s\n",
+ dev_name(&port->dev), dev_name(port->uport));
+ rc = cxl_add_ep(port, &cxlmd->dev);
+ if (rc == -EEXIST) {
+ /*
+ * "can't" happen, but this error code means
+ * something to the caller, so translate it.
+ */
+ rc = -ENXIO;
+ }
+ put_device(&port->dev);
+ }
+
+ put_device(&parent_port->dev);
+ return rc;
+}
+
+int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd)
+{
+ struct device *dev = &cxlmd->dev;
+ struct device *iter;
+ int rc;
+
+ rc = devm_add_action_or_reset(&cxlmd->dev, cxl_detach_ep, cxlmd);
+ if (rc)
+ return rc;
+
+ /*
+ * Scan for and add all cxl_ports in this device's ancestry.
+ * Repeat until no more ports are added. Abort if a port add
+ * attempt fails.
+ */
+retry:
+ for (iter = dev; iter; iter = grandparent(iter)) {
+ struct device *dport_dev = grandparent(iter);
+ struct device *uport_dev;
+ struct cxl_port *port;
+
+ if (!dport_dev)
+ return 0;
+
+ uport_dev = dport_dev->parent;
+ if (!uport_dev) {
+ dev_warn(dev, "at %s no parent for dport: %s\n",
+ dev_name(iter), dev_name(dport_dev));
+ return -ENXIO;
+ }
+
+ dev_dbg(dev, "scan: iter: %s dport_dev: %s parent: %s\n",
+ dev_name(iter), dev_name(dport_dev),
+ dev_name(uport_dev));
+ port = find_cxl_port(dport_dev);
+ if (port) {
+ dev_dbg(&cxlmd->dev,
+ "found already registered port %s:%s\n",
+ dev_name(&port->dev), dev_name(port->uport));
+ rc = cxl_add_ep(port, &cxlmd->dev);
+
+ /*
+ * If the endpoint already exists in the port's list,
+ * that's ok, it was added on a previous pass.
+ * Otherwise, retry in add_port_attach_ep() after taking
+ * the parent_port lock as the current port may be being
+ * reaped.
+ */
+ if (rc && rc != -EEXIST) {
+ put_device(&port->dev);
+ return rc;
+ }
+
+ /* Any more ports to add between this one and the root? */
+ if (!dev_is_cxl_root_child(&port->dev)) {
+ put_device(&port->dev);
+ continue;
+ }
+
+ put_device(&port->dev);
+ return 0;
+ }
+
+ rc = add_port_attach_ep(cxlmd, uport_dev, dport_dev);
+ /* port missing, try to add parent */
+ if (rc == -EAGAIN)
+ continue;
+ /* failed to add ep or port */
+ if (rc)
+ return rc;
+ /* port added, new descendants possible, start over */
+ goto retry;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(devm_cxl_enumerate_ports, CXL);
+
+struct cxl_dport *cxl_find_dport_by_dev(struct cxl_port *port,
+ const struct device *dev)
+{
+ struct cxl_dport *dport;
+
+ cxl_device_lock(&port->dev);
+ list_for_each_entry(dport, &port->dports, list)
+ if (dport->dport == dev) {
+ cxl_device_unlock(&port->dev);
+ return dport;
+ }
+
+ cxl_device_unlock(&port->dev);
+ return NULL;
+}
+EXPORT_SYMBOL_NS_GPL(cxl_find_dport_by_dev, CXL);
+
static int decoder_populate_targets(struct cxl_decoder *cxld,
struct cxl_port *port, int *target_map)
{
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 89fbf49ebf98..de4fbe7cbf42 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -262,8 +262,10 @@ struct cxl_nvdimm {
* @uport: PCI or platform device implementing the upstream port capability
* @id: id for port device-name
* @dports: cxl_dport instances referenced by decoders
+ * @endpoints: cxl_ep instances, endpoints that are a descendant of this port
* @decoder_ida: allocator for decoder ids
* @component_reg_phys: component register capability base address (optional)
+ * @dead: last ep has been removed, force port re-creation
* @depth: How deep this port is relative to the root. depth 0 is the root.
*/
struct cxl_port {
@@ -271,8 +273,10 @@ struct cxl_port {
struct device *uport;
int id;
struct list_head dports;
+ struct list_head endpoints;
struct ida decoder_ida;
resource_size_t component_reg_phys;
+ bool dead;
unsigned int depth;
};
@@ -292,6 +296,16 @@ struct cxl_dport {
struct list_head list;
};
+/**
+ * struct cxl_ep - track an endpoint's interest in a port
+ * @ep: device that hosts a generic CXL endpoint (expander or accelerator)
+ * @list: node on port->endpoints list
+ */
+struct cxl_ep {
+ struct device *ep;
+ struct list_head list;
+};
+
/*
* The platform firmware device hosting the root is also the top of the
* CXL port topology. All other CXL ports have another CXL port as their
@@ -313,9 +327,14 @@ struct cxl_port *devm_cxl_add_port(struct device *host, struct device *uport,
resource_size_t component_reg_phys,
struct cxl_port *parent_port);
struct cxl_port *find_cxl_root(struct device *dev);
+int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd);
+
struct cxl_dport *devm_cxl_add_dport(struct cxl_port *port,
struct device *dport, int port_id,
resource_size_t component_reg_phys);
+struct cxl_dport *cxl_find_dport_by_dev(struct cxl_port *port,
+ const struct device *dev);
+
struct cxl_decoder *to_cxl_decoder(struct device *dev);
bool is_root_decoder(struct device *dev);
bool is_cxl_decoder(struct device *dev);
next prev parent reply other threads:[~2022-02-04 15:08 UTC|newest]
Thread overview: 172+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-24 0:28 [PATCH v3 00/40] CXL.mem Topology Discovery and Hotplug Support Dan Williams
2022-01-24 0:28 ` [PATCH v3 01/40] cxl: Rename CXL_MEM to CXL_PCI Dan Williams
2022-01-24 0:28 ` [PATCH v3 02/40] cxl/pci: Implement Interface Ready Timeout Dan Williams
2022-01-31 22:21 ` Ben Widawsky
2022-01-31 23:11 ` Dan Williams
2022-01-31 23:25 ` Ben Widawsky
2022-01-31 23:47 ` Dan Williams
2022-01-31 23:51 ` [PATCH v4 " Dan Williams
2022-01-24 0:28 ` [PATCH v3 03/40] cxl/pci: Defer mailbox status checks to command timeouts Dan Williams
2022-01-31 22:28 ` Ben Widawsky
2022-01-24 0:29 ` [PATCH v3 04/40] cxl: Flesh out register names Dan Williams
2022-01-24 0:29 ` [PATCH v3 05/40] cxl/pci: Add new DVSEC definitions Dan Williams
2022-01-24 0:29 ` [PATCH v3 06/40] cxl/acpi: Map component registers for Root Ports Dan Williams
2022-01-24 0:29 ` [PATCH v3 07/40] cxl: Introduce module_cxl_driver Dan Williams
2022-01-24 0:29 ` [PATCH v3 08/40] cxl/core/port: Rename bus.c to port.c Dan Williams
2022-01-31 22:34 ` Ben Widawsky
2022-01-24 0:29 ` [PATCH v3 09/40] cxl/decoder: Hide physical address information from non-root Dan Williams
2022-01-31 14:14 ` Jonathan Cameron
2022-01-31 22:34 ` Ben Widawsky
2022-01-24 0:29 ` [PATCH v3 10/40] cxl/core: Convert decoder range to resource Dan Williams
2022-01-24 0:29 ` [PATCH v3 11/40] cxl/core/port: Clarify decoder creation Dan Williams
2022-01-31 14:46 ` Jonathan Cameron
2022-01-31 21:17 ` Dan Williams
2022-01-31 21:33 ` [PATCH v4 " Dan Williams
2022-02-01 10:49 ` Jonathan Cameron
2022-01-24 0:29 ` [PATCH v3 12/40] cxl/core: Fix cxl_probe_component_regs() error message Dan Williams
2022-01-31 14:53 ` Jonathan Cameron
2022-01-31 22:29 ` Dan Williams
2022-01-31 22:39 ` Ben Widawsky
2022-01-24 0:29 ` [PATCH v3 13/40] cxl/core/port: Make passthrough decoder init implicit Dan Williams
2022-01-31 14:56 ` Jonathan Cameron
2022-01-24 0:29 ` [PATCH v3 14/40] cxl/core: Track port depth Dan Williams
2022-01-31 14:57 ` Jonathan Cameron
2022-01-24 0:29 ` [PATCH v3 15/40] cxl: Prove CXL locking Dan Williams
2022-01-31 15:48 ` Jonathan Cameron
2022-01-31 19:43 ` Dan Williams
2022-01-31 19:50 ` [PATCH v4 " Dan Williams
2022-01-31 23:23 ` Ben Widawsky
2022-01-24 0:30 ` [PATCH v3 16/40] cxl/core/port: Use dedicated lock for decoder target list Dan Williams
2022-01-26 2:54 ` [PATCH v4 " Dan Williams
2022-01-31 15:59 ` Jonathan Cameron
2022-01-31 23:31 ` Dan Williams
2022-01-31 23:34 ` Ben Widawsky
2022-01-31 23:38 ` Dan Williams
2022-01-31 23:42 ` Ben Widawsky
2022-01-31 23:58 ` Dan Williams
2022-01-31 23:35 ` [PATCH v5 " Dan Williams
2022-02-01 10:52 ` Jonathan Cameron
2022-01-24 0:30 ` [PATCH v3 17/40] cxl/port: Introduce cxl_port_to_pci_bus() Dan Williams
2022-01-31 16:04 ` Jonathan Cameron
2022-01-31 16:44 ` [PATCH v4 " Dan Williams
2022-01-31 23:41 ` Ben Widawsky
2022-01-24 0:30 ` [PATCH v3 18/40] cxl/pmem: Introduce a find_cxl_root() helper Dan Williams
2022-01-26 18:55 ` [PATCH v4 " Dan Williams
2022-01-26 23:59 ` [PATCH v5 " Dan Williams
2022-01-31 16:18 ` Jonathan Cameron
2022-02-01 0:22 ` Dan Williams
2022-02-01 10:58 ` Jonathan Cameron
2022-02-01 0:34 ` [PATCH v6 " Dan Williams
2022-02-01 10:59 ` Jonathan Cameron
2022-01-24 0:30 ` [PATCH v3 19/40] cxl/port: Up-level cxl_add_dport() locking requirements to the caller Dan Williams
2022-01-31 16:20 ` Jonathan Cameron
2022-01-31 23:47 ` Ben Widawsky
2022-02-01 0:43 ` Dan Williams
2022-02-01 1:07 ` [PATCH v4 " Dan Williams
2022-02-01 11:00 ` Jonathan Cameron
2022-01-24 0:30 ` [PATCH v3 20/40] cxl/pci: Rename pci.h to cxlpci.h Dan Williams
2022-01-31 16:22 ` Jonathan Cameron
2022-02-01 0:00 ` Dan Williams
2022-01-31 23:48 ` Ben Widawsky
2022-01-24 0:30 ` [PATCH v3 21/40] cxl/core: Generalize dport enumeration in the core Dan Williams
2022-01-31 17:02 ` Jonathan Cameron
2022-02-01 1:58 ` Dan Williams
2022-02-01 2:10 ` [PATCH v4 " Dan Williams
2022-02-01 11:03 ` Jonathan Cameron
2022-01-24 0:30 ` [PATCH v3 22/40] cxl/core/hdm: Add CXL standard decoder enumeration to " Dan Williams
2022-01-26 3:09 ` [PATCH v4 " Dan Williams
2022-01-31 14:26 ` Jonathan Cameron
2022-01-31 17:51 ` Jonathan Cameron
2022-02-01 5:10 ` Dan Williams
2022-02-01 20:24 ` [PATCH v5 " Dan Williams
2022-02-02 9:31 ` Jonathan Cameron
2022-02-01 0:24 ` [PATCH v3 " Ben Widawsky
2022-02-01 4:58 ` Dan Williams
2022-01-24 0:30 ` [PATCH v3 23/40] cxl/core: Emit modalias for CXL devices Dan Williams
2022-01-31 17:57 ` Jonathan Cameron
2022-02-01 15:11 ` Ben Widawsky
2022-01-24 0:30 ` [PATCH v3 24/40] cxl/port: Add a driver for 'struct cxl_port' objects Dan Williams
2022-01-26 20:16 ` [PATCH v4 " Dan Williams
2022-01-31 18:11 ` Jonathan Cameron
2022-02-01 20:43 ` Dan Williams
2022-02-02 9:33 ` Jonathan Cameron
2022-02-01 21:07 ` [PATCH v5 " Dan Williams
2022-01-24 0:30 ` [PATCH v3 25/40] cxl/core/port: Remove @host argument for dport + decoder enumeration Dan Williams
2022-01-31 14:32 ` Jonathan Cameron
2022-01-31 18:14 ` Jonathan Cameron
2022-02-01 15:17 ` Ben Widawsky
2022-02-01 21:09 ` Dan Williams
2022-02-01 21:23 ` [PATCH v4 " Dan Williams
2022-01-24 0:30 ` [PATCH v3 26/40] cxl/pci: Store component register base in cxlds Dan Williams
2022-01-31 18:15 ` Jonathan Cameron
2022-02-01 21:28 ` [PATCH v4 " Dan Williams
2022-01-24 0:31 ` [PATCH v3 27/40] cxl/pci: Cache device DVSEC offset Dan Williams
2022-01-31 18:19 ` Jonathan Cameron
2022-02-01 15:24 ` Ben Widawsky
2022-02-01 21:41 ` Dan Williams
2022-02-01 22:11 ` Ben Widawsky
2022-02-01 22:15 ` Dan Williams
2022-02-01 22:20 ` Ben Widawsky
2022-02-01 22:24 ` Dan Williams
2022-02-02 9:36 ` Jonathan Cameron
2022-02-01 22:06 ` [PATCH v4 " Dan Williams
2022-02-02 9:36 ` Jonathan Cameron
2022-01-24 0:31 ` [PATCH v3 28/40] cxl/pci: Retrieve CXL DVSEC memory info Dan Williams
2022-01-31 18:25 ` Jonathan Cameron
2022-02-01 22:52 ` Dan Williams
2022-02-01 23:48 ` [PATCH v4 " Dan Williams
2022-02-02 9:39 ` Jonathan Cameron
2022-01-24 0:31 ` [PATCH v3 29/40] cxl/pci: Implement wait for media active Dan Williams
2022-01-31 18:29 ` Jonathan Cameron
2022-02-01 23:56 ` Dan Williams
2022-01-24 0:31 ` [PATCH v3 30/40] cxl/pci: Emit device serial number Dan Williams
2022-01-31 18:33 ` Jonathan Cameron
2022-01-31 21:43 ` Dan Williams
2022-01-31 21:56 ` [PATCH v4 " Dan Williams
2022-01-24 0:31 ` [PATCH v3 31/40] cxl/memdev: Add numa_node attribute Dan Williams
2022-01-31 18:41 ` Jonathan Cameron
2022-02-01 23:57 ` Dan Williams
2022-02-02 9:44 ` Jonathan Cameron
2022-02-02 15:44 ` Dan Williams
2022-02-03 9:41 ` Jonathan Cameron
2022-02-03 16:59 ` Dan Williams
2022-02-03 18:05 ` Jonathan Cameron
2022-02-04 4:25 ` Dan Williams
2022-02-01 15:31 ` Ben Widawsky
2022-02-01 15:49 ` Jonathan Cameron
2022-02-01 16:35 ` Ben Widawsky
2022-02-01 17:38 ` Jonathan Cameron
2022-02-01 23:59 ` Dan Williams
2022-02-02 1:18 ` Dan Williams
2022-01-24 0:31 ` [PATCH v3 32/40] cxl/core/port: Add switch port enumeration Dan Williams
2022-02-01 12:13 ` Jonathan Cameron
2022-02-02 5:26 ` Dan Williams
2022-02-01 17:37 ` Ben Widawsky
2022-02-02 6:03 ` Dan Williams
2022-02-02 17:07 ` [PATCH v4 " Dan Williams
2022-02-03 9:55 ` Jonathan Cameron
2022-02-04 15:08 ` Dan Williams [this message]
2022-01-24 0:31 ` [PATCH v3 33/40] cxl/mem: Add the cxl_mem driver Dan Williams
2022-01-26 3:16 ` [PATCH v4 " Dan Williams
2022-02-01 12:45 ` Jonathan Cameron
2022-02-01 17:44 ` Ben Widawsky
2022-02-03 2:49 ` Dan Williams
2022-02-03 9:59 ` Jonathan Cameron
2022-02-04 14:54 ` Dan Williams
2022-02-03 3:56 ` [PATCH v5 " Dan Williams
2022-02-03 12:07 ` Jonathan Cameron
2022-02-04 15:18 ` [PATCH v6 " Dan Williams
2022-01-24 0:31 ` [PATCH v3 34/40] cxl/core: Move target_list out of base decoder attributes Dan Williams
2022-01-31 18:45 ` Jonathan Cameron
2022-02-01 17:45 ` Ben Widawsky
2022-01-24 0:31 ` [PATCH v3 35/40] cxl/core/port: Add endpoint decoders Dan Williams
2022-02-01 12:47 ` Jonathan Cameron
2022-02-03 4:02 ` [PATCH v4 " Dan Williams
2022-02-14 17:45 ` Jonathan Cameron
2022-02-14 19:14 ` Dan Williams
2022-01-24 0:31 ` [PATCH v3 36/40] tools/testing/cxl: Mock dvsec_ranges() Dan Williams
2022-01-24 0:31 ` [PATCH v3 37/40] tools/testing/cxl: Fix root port to host bridge assignment Dan Williams
2022-01-24 0:32 ` [PATCH v3 38/40] tools/testing/cxl: Mock one level of switches Dan Williams
2022-01-24 0:32 ` [PATCH v3 39/40] tools/testing/cxl: Enumerate mock decoders Dan Williams
2022-01-24 0:32 ` [PATCH v3 40/40] tools/testing/cxl: Add a physical_node link Dan Williams
2022-02-01 12:53 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=164398731146.902644.1029761300481366248.stgit@dwillia2-desk3.amr.corp.intel.com \
--to=dan.j.williams@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=nvdimm@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).