From: Ben Widawsky <ben.widawsky@intel.com>
To: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: linux-cxl@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org,
Dan Williams <dan.j.williams@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
"Kelley, Sean V" <sean.v.kelley@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Subject: Re: [RFC PATCH 7/9] cxl/mem: Implement polled mode mailbox
Date: Tue, 17 Nov 2020 08:34:38 -0800 [thread overview]
Message-ID: <20201117163438.co63em73mmil5xm5@intel.com> (raw)
In-Reply-To: <20201117153122.00001a5a@Huawei.com>
On 20-11-17 15:31:22, Jonathan Cameron wrote:
> On Tue, 10 Nov 2020 21:43:54 -0800
> Ben Widawsky <ben.widawsky@intel.com> wrote:
>
> > Create a function to handle sending a command, optionally with a
> > payload, to the memory device, polling on a result, and then optionally
> > copying out the payload. The algorithm for doing this come straight out
> > of the CXL 2.0 specification.
> >
> > Primary mailboxes are capable of generating an interrupt when submitting
> > a command in the background. That implementation is saved for a later
> > time.
> >
> > Secondary mailboxes aren't implemented at this time.
> >
> > WARNING: This is untested with actual timeouts occurring.
> >
> > Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
>
> Question inline for why the preempt / local timer dance is worth bothering with.
> What am I missing?
>
> Thanks,
>
> Jonathan
>
> > ---
> > drivers/cxl/cxl.h | 16 +++++++
> > drivers/cxl/mem.c | 107 ++++++++++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 123 insertions(+)
> >
> > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> > index 482fc9cdc890..f49ab80f68bd 100644
> > --- a/drivers/cxl/cxl.h
> > +++ b/drivers/cxl/cxl.h
> > @@ -21,8 +21,12 @@
> > #define CXLDEV_MB_CTRL 0x04
> > #define CXLDEV_MB_CTRL_DOORBELL BIT(0)
> > #define CXLDEV_MB_CMD 0x08
> > +#define CXLDEV_MB_CMD_PAYLOAD_LENGTH_SHIFT 16
> > #define CXLDEV_MB_STATUS 0x10
> > +#define CXLDEV_MB_STATUS_RET_CODE_SHIFT 32
> > +#define CXLDEV_MB_STATUS_RET_CODE_MASK 0xffff
> > #define CXLDEV_MB_BG_CMD_STATUS 0x18
> > +#define CXLDEV_MB_PAYLOAD 0x20
> >
> > /* Memory Device */
> > #define CXLMDEV_STATUS 0
> > @@ -114,4 +118,16 @@ static inline u64 __cxl_raw_read_reg64(struct cxl_mem *cxlm, u32 reg)
> >
> > return readq(reg_addr + reg);
> > }
> > +
> > +static inline void cxl_mbox_payload_fill(struct cxl_mem *cxlm, u8 *input,
> > + unsigned int length)
> > +{
> > + memcpy_toio(cxlm->mbox.regs + CXLDEV_MB_PAYLOAD, input, length);
> > +}
> > +
> > +static inline void cxl_mbox_payload_drain(struct cxl_mem *cxlm,
> > + u8 *output, unsigned int length)
> > +{
> > + memcpy_fromio(output, cxlm->mbox.regs + CXLDEV_MB_PAYLOAD, length);
> > +}
> > #endif /* __CXL_H__ */
> > diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
> > index 9fd2d1daa534..08913360d500 100644
> > --- a/drivers/cxl/mem.c
> > +++ b/drivers/cxl/mem.c
> > @@ -1,5 +1,6 @@
> > // SPDX-License-Identifier: GPL-2.0-only
> > // Copyright(c) 2020 Intel Corporation. All rights reserved.
> > +#include <linux/sched/clock.h>
> > #include <linux/module.h>
> > #include <linux/pci.h>
> > #include <linux/io.h>
> > @@ -7,6 +8,112 @@
> > #include "pci.h"
> > #include "cxl.h"
> >
> > +struct mbox_cmd {
> > + u16 cmd;
> > + u8 *payload;
> > + size_t payload_size;
> > + u16 return_code;
> > +};
> > +
> > +static int cxldev_wait_for_doorbell(struct cxl_mem *cxlm)
> > +{
> > + u64 start, now;
> > + int cpu, ret, timeout = 2000000000;
> > +
> > + start = local_clock();
> > + preempt_disable();
> > + cpu = smp_processor_id();
> > + for (;;) {
> > + now = local_clock();
> > + preempt_enable();
>
> What do we ever do with this mailbox that is particularly
> performance critical? I'd like to understand why we care enough
> to mess around with the preemption changes and local clock etc.
>
It is quite obviously a premature optimization at this point (since we only
support a single command in QEMU). However, the polling can be anywhere from
instant to 2 seconds. QEMU implementation aside again, some devices may never
support interrupts on completion, and so I thought providing a poll function now
that is capable of working for most [all?] cases was wise.
> > + if ((cxl_read_mbox_reg32(cxlm, CXLDEV_MB_CTRL) &
> > + CXLDEV_MB_CTRL_DOORBELL) == 0) {
> > + ret = 0;
> > + break;
> > + }
> > +
> > + if (now - start >= timeout) {
> > + ret = -ETIMEDOUT;
> > + break;
> > + }
> > +
> > + cpu_relax();
> > + preempt_disable();
> > + if (unlikely(cpu != smp_processor_id())) {
> > + timeout -= (now - start);
> > + cpu = smp_processor_id();
> > + start = local_clock();
> > + }
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +/*
> > + * Returns 0 if the doorbell transaction was successful from a protocol level.
> > + * Caller should check the return code in @mbox_cmd to make sure it succeeded.
> > + */
> > +static int __maybe_unused cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm, struct mbox_cmd *mbox_cmd)
> > +{
> > + u64 cmd, status;
> > + int rc;
> > +
> > + lockdep_assert_held(&cxlm->mbox_lock);
> > +
> > + /*
> > + * Here are the steps from 8.2.8.4 of the CXL 2.0 spec.
> > + * 1. Caller reads MB Control Register to verify doorbell is clear
> > + * 2. Caller writes Command Register
> > + * 3. Caller writes Command Payload Registers if input payload is non-empty
> > + * 4. Caller writes MB Control Register to set doorbell
> > + * 5. Caller either polls for doorbell to be clear or waits for interrupt if configured
> > + * 6. Caller reads MB Status Register to fetch Return code
> > + * 7. If command successful, Caller reads Command Register to get Payload Length
> > + * 8. If output payload is non-empty, host reads Command Payload Registers
> > + */
> > +
> > + cmd = mbox_cmd->cmd;
> > + if (mbox_cmd->payload_size) {
> > + /* #3 */
>
> Having just given the steps above, having them out of order feels like it needs
> a comment to state why.
>
> > + cmd |= mbox_cmd->payload_size
> > + << CXLDEV_MB_CMD_PAYLOAD_LENGTH_SHIFT;
> > + cxl_mbox_payload_fill(cxlm, mbox_cmd->payload, mbox_cmd->payload_size);
> > + }
> > +
> > + /* #2 */
> > + cxl_write_mbox_reg64(cxlm, CXLDEV_MB_CMD, cmd);
> > +
> > + /* #4 */
> > + cxl_write_mbox_reg32(cxlm, CXLDEV_MB_CTRL, CXLDEV_MB_CTRL_DOORBELL);
> > +
> > + /* #5 */
> > + rc = cxldev_wait_for_doorbell(cxlm);
> > + if (rc == -ETIMEDOUT) {
> > + dev_warn(&cxlm->pdev->dev, "Mailbox command timed out\n");
> > + return rc;
> > + }
> > +
> > + /* #6 */
> > + status = cxl_read_mbox_reg64(cxlm, CXLDEV_MB_STATUS);
> > + cmd = cxl_read_mbox_reg64(cxlm, CXLDEV_MB_CMD);
> > +
> > + mbox_cmd->return_code = (status >> CXLDEV_MB_STATUS_RET_CODE_SHIFT) &
> > + CXLDEV_MB_STATUS_RET_CODE_MASK;
> > +
> > + /* There was a problem, let the caller deal with it */
> > + if (mbox_cmd->return_code != 0)
> > + return 0;
> > +
> > + /* #7 */
> > + mbox_cmd->payload_size = cmd >> CXLDEV_MB_CMD_PAYLOAD_LENGTH_SHIFT;
> > +
> > + /* #8 */
> > + if (mbox_cmd->payload_size)
> > + cxl_mbox_payload_drain(cxlm, mbox_cmd->payload, mbox_cmd->payload_size);
> > +
> > + return 0;
> > +}
> > +
> > static int cxl_mem_mbox_get(struct cxl_mem *cxlm)
> > {
> > u64 md_status;
>
next prev parent reply other threads:[~2020-11-17 16:35 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-11 5:43 [RFC PATCH 0/9] CXL 2.0 Support Ben Widawsky
2020-11-11 5:43 ` [RFC PATCH 1/9] cxl/acpi: Add an acpi_cxl module for the CXL interconnect Ben Widawsky
2020-11-11 6:17 ` Randy Dunlap
2020-11-11 7:10 ` Christoph Hellwig
2020-11-11 7:30 ` Verma, Vishal L
2020-11-11 7:34 ` hch
2020-11-11 7:36 ` Verma, Vishal L
2020-11-11 23:03 ` Bjorn Helgaas
2020-11-16 17:59 ` Jonathan Cameron
2020-11-16 18:23 ` Verma, Vishal L
2020-11-17 14:32 ` Rafael J. Wysocki
2020-11-17 21:45 ` Dan Williams
2020-11-18 11:14 ` Rafael J. Wysocki
2020-11-11 5:43 ` [RFC PATCH 2/9] cxl/acpi: add OSC support Ben Widawsky
2020-11-16 17:59 ` Jonathan Cameron
2020-11-16 23:25 ` Dan Williams
2020-11-18 12:25 ` Rafael J. Wysocki
2020-11-18 17:58 ` Dan Williams
2020-11-11 5:43 ` [RFC PATCH 3/9] cxl/mem: Add a driver for the type-3 mailbox Ben Widawsky
2020-11-11 6:17 ` Randy Dunlap
2020-11-11 7:12 ` Christoph Hellwig
2020-11-11 17:17 ` Dan Williams
2020-11-11 18:27 ` Dan Williams
2020-11-11 21:41 ` Randy Dunlap
2020-11-11 22:40 ` Dan Williams
2020-11-16 16:56 ` Christoph Hellwig
2020-11-13 18:17 ` Bjorn Helgaas
2020-11-14 1:08 ` Ben Widawsky
2020-11-15 0:23 ` Dan Williams
2020-11-17 14:49 ` Jonathan Cameron
2020-12-04 7:22 ` Dan Williams
2020-12-04 7:27 ` Dan Williams
2020-12-04 17:39 ` Jonathan Cameron
2020-11-11 5:43 ` [RFC PATCH 4/9] cxl/mem: Map memory device registers Ben Widawsky
2020-11-13 18:17 ` Bjorn Helgaas
2020-11-14 1:12 ` Ben Widawsky
2020-11-16 23:19 ` Dan Williams
2020-11-17 0:23 ` Bjorn Helgaas
2020-11-23 19:20 ` Ben Widawsky
2020-11-23 19:32 ` Dan Williams
2020-11-23 19:58 ` Ben Widawsky
2020-11-17 15:00 ` Jonathan Cameron
2020-11-11 5:43 ` [RFC PATCH 5/9] cxl/mem: Find device capabilities Ben Widawsky
2020-11-13 18:26 ` Bjorn Helgaas
2020-11-14 1:36 ` Ben Widawsky
2020-11-17 15:15 ` Jonathan Cameron
2020-11-24 0:17 ` Ben Widawsky
2020-11-26 6:05 ` Jon Masters
2020-11-26 18:18 ` Ben Widawsky
2020-12-04 7:35 ` Dan Williams
2020-12-04 7:41 ` Dan Williams
2020-12-07 6:12 ` Ben Widawsky
2020-11-11 5:43 ` [RFC PATCH 6/9] cxl/mem: Initialize the mailbox interface Ben Widawsky
2020-11-17 15:22 ` Jonathan Cameron
2020-11-11 5:43 ` [RFC PATCH 7/9] cxl/mem: Implement polled mode mailbox Ben Widawsky
2020-11-13 23:14 ` Bjorn Helgaas
2020-11-17 15:31 ` Jonathan Cameron
2020-11-17 16:34 ` Ben Widawsky [this message]
2020-11-17 18:06 ` Jonathan Cameron
2020-11-17 18:38 ` Dan Williams
2020-11-11 5:43 ` [RFC PATCH 8/9] cxl/mem: Register CXL memX devices Ben Widawsky
2020-11-17 15:56 ` Jonathan Cameron
2020-11-20 2:16 ` Dan Williams
2020-11-20 15:20 ` Jonathan Cameron
2020-11-11 5:43 ` [RFC PATCH 9/9] MAINTAINERS: Add maintainers of the CXL driver Ben Widawsky
2020-11-11 22:06 ` [RFC PATCH 0/9] CXL 2.0 Support Ben Widawsky
2020-11-11 22:43 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201117163438.co63em73mmil5xm5@intel.com \
--to=ben.widawsky@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=bhelgaas@google.com \
--cc=dan.j.williams@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rafael.j.wysocki@intel.com \
--cc=sean.v.kelley@intel.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).