linux-cxl.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Terry Bowman <terry.bowman@amd.com>
To: <alison.schofield@intel.com>, <vishal.l.verma@intel.com>,
	<ira.weiny@intel.com>, <bwidawsk@kernel.org>,
	<dan.j.williams@intel.com>, <dave.jiang@intel.com>,
	<Jonathan.Cameron@huawei.com>, <linux-cxl@vger.kernel.org>
Cc: <terry.bowman@amd.com>, <rrichter@amd.com>,
	<linux-kernel@vger.kernel.org>, <bhelgaas@google.com>
Subject: [PATCH v5 19/26] cxl/pci: Add RCH downstream port AER register discovery
Date: Wed, 7 Jun 2023 17:16:44 -0500	[thread overview]
Message-ID: <20230607221651.2454764-20-terry.bowman@amd.com> (raw)
In-Reply-To: <20230607221651.2454764-1-terry.bowman@amd.com>

Restricted CXL host (RCH) downstream port AER information is not currently
logged while in the error state. One problem preventing the error logging
is the AER and RAS registers are not accessible. The CXL driver requires
changes to find RCH downstream port AER and RAS registers for purpose of
error logging.

RCH downstream ports are not enumerated during a PCI bus scan and are
instead discovered using system firmware, ACPI in this case.[1] The
downstream port is implemented as a Root Complex Register Block (RCRB).
The RCRB is a 4k memory block containing PCIe registers based on the PCIe
root port.[2] The RCRB includes AER extended capability registers used for
reporting errors. Note, the RCH's AER Capability is located in the RCRB
memory space instead of PCI configuration space, thus its register access
is different. Existing kernel PCIe AER functions can not be used to manage
the downstream port AER capabilities and RAS registers because the port was
not enumerated during PCI scan and the registers are not PCI config
accessible.

Discover RCH downstream port AER extended capability registers. Use MMIO
accesses to search for extended AER capability in RCRB register space.

[1] CXL 3.0 Spec, 9.11.2 - System Firmware View of CXL 1.1 Hierarchy
[2] CXL 3.0 Spec, 8.2.1.1 - RCH Downstream Port RCRB

Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/cxl/core/regs.c | 51 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index ba2b1763042c..dd6c3c898cff 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -408,6 +408,54 @@ int cxl_setup_regs(struct cxl_register_map *map)
 }
 EXPORT_SYMBOL_NS_GPL(cxl_setup_regs, CXL);
 
+static void __iomem *cxl_map_reg(struct device *dev, resource_size_t addr,
+				resource_size_t length)
+{
+	struct resource *res;
+
+	if (WARN_ON_ONCE(addr == CXL_RESOURCE_NONE))
+		return NULL;
+
+	res = request_mem_region(addr, length, dev_name(dev));
+	if (!res)
+		return NULL;
+
+	return ioremap(addr, length);
+}
+
+static void cxl_unmap_reg(void __iomem *base, resource_size_t addr,
+			 resource_size_t length)
+{
+	iounmap(base);
+	release_mem_region(addr, length);
+}
+
+static u16 cxl_rcrb_to_aer(struct device *dev, resource_size_t rcrb)
+{
+	void __iomem *addr;
+	u16 offset = 0;
+	u32 cap_hdr;
+
+	addr = cxl_map_reg(dev, rcrb, SZ_4K);
+	if (!addr)
+		return 0;
+
+	cap_hdr = readl(addr + offset);
+	while (PCI_EXT_CAP_ID(cap_hdr) != PCI_EXT_CAP_ID_ERR) {
+		offset = PCI_EXT_CAP_NEXT(cap_hdr);
+		if (!offset)
+			break;
+		cap_hdr = readl(addr + offset);
+	}
+
+	if (offset)
+		dev_dbg(dev, "found AER extended capability (0x%x)\n", offset);
+
+	cxl_unmap_reg(addr, rcrb, SZ_4K);
+
+	return offset;
+}
+
 resource_size_t cxl_probe_rcrb(struct device *dev, resource_size_t rcrb,
 			       struct cxl_rcrb_info *ri, enum cxl_rcrb which)
 {
@@ -471,6 +519,9 @@ resource_size_t cxl_probe_rcrb(struct device *dev, resource_size_t rcrb,
 	if (!IS_ALIGNED(component_reg_phys, CXL_COMPONENT_REG_BLOCK_SIZE))
 		return CXL_RESOURCE_NONE;
 
+	if (ri)
+		ri->aer_cap = cxl_rcrb_to_aer(dev, ri->base);
+
 	return component_reg_phys;
 }
 EXPORT_SYMBOL_NS_GPL(cxl_probe_rcrb, CXL);
-- 
2.34.1


  parent reply	other threads:[~2023-06-07 22:22 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-07 22:16 [PATCH v5 00/26] cxl/pci: Add support for RCH RAS error handling Terry Bowman
2023-06-07 22:16 ` [PATCH v5 01/26] cxl/acpi: Probe RCRB later during RCH downstream port creation Terry Bowman
2023-06-08  1:03   ` Dan Williams
2023-06-08  1:11     ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 02/26] cxl/rch: Prepare for caching the MMIO mapped PCIe AER capability Terry Bowman
2023-06-08  4:53   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 03/26] cxl: Rename member @dport of struct cxl_dport to @dev Terry Bowman
2023-06-08  6:42   ` Dan Williams
2023-06-08 14:36     ` Terry Bowman
2023-06-08 19:08       ` Dan Williams
2023-06-08 19:22         ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 04/26] cxl/core/regs: Rename phys_addr in cxl_map_component_regs() Terry Bowman
2023-06-08  6:47   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 05/26] cxl/core/regs: Add @dev to cxl_register_map Terry Bowman
2023-06-08 19:29   ` Dan Williams
2023-06-08 21:50     ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 06/26] cxl/pci: Refactor component register discovery for reuse Terry Bowman
2023-06-08 19:57   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 07/26] cxl/acpi: Moving add_host_bridge_uport() around Terry Bowman
2023-06-08 20:02   ` Dan Williams
2023-06-08 21:50     ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 08/26] cxl/acpi: Directly bind the CEDT detected CHBCR to the Host Bridge's port Terry Bowman
2023-06-09  4:24   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 09/26] cxl/regs: Remove early capability checks in Component Register setup Terry Bowman
2023-06-10  0:18   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 10/26] cxl/mem: Prepare for early RCH dport component register setup Terry Bowman
2023-06-10  0:26   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 11/26] cxl/pci: Early setup RCH dport component registers from RCRB Terry Bowman
2023-06-10  1:36   ` Dan Williams
2023-06-10  1:44   ` Dan Williams
2023-06-12 20:39   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 12/26] cxl/port: Store the port's Component Register mappings in struct cxl_port Terry Bowman
2023-06-10  2:18   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 13/26] cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport Terry Bowman
2023-06-10  2:23   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 14/26] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Terry Bowman
2023-06-07 23:01   ` Concept of LD-ID in QEMU Shesha Bhushan Sreenivasamurthy
2023-06-08 10:31     ` Jonathan Cameron
2023-06-08 10:36       ` Jonathan Cameron
2023-06-08 23:38         ` [EXT] " Shesha Bhushan Sreenivasamurthy
2023-06-09 11:20           ` Jonathan Cameron
2023-06-10  2:29   ` [PATCH v5 14/26] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Dan Williams
2023-06-07 22:16 ` [PATCH v5 15/26] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Terry Bowman
2023-06-10  2:34   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 16/26] cxl/port: Remove Component Register base address from struct cxl_port Terry Bowman
2023-06-10  2:36   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 17/26] cxl/port: Remove Component Register base address from struct cxl_dport Terry Bowman
2023-06-10  2:37   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 18/26] cxl/pci: Remove Component Register base address from struct cxl_dev_state Terry Bowman
2023-06-10  2:38   ` Dan Williams
2023-06-07 22:16 ` Terry Bowman [this message]
2023-06-10  3:09   ` [PATCH v5 19/26] cxl/pci: Add RCH downstream port AER register discovery Dan Williams
2023-06-12 14:41     ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 20/26] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Terry Bowman
2023-06-10  3:11   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 21/26] cxl/pci: Update CXL error logging to use RAS register address Terry Bowman
2023-06-10  3:12   ` Dan Williams
2023-06-12 21:12   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 22/26] cxl/pci: Map RCH downstream AER registers for logging protocol errors Terry Bowman
2023-06-10  3:23   ` Dan Williams
2023-06-12 18:19     ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 23/26] cxl/pci: Disable root port interrupts in RCH mode Terry Bowman
2023-06-12 20:29   ` Dan Williams
2023-06-13 15:28     ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 24/26] cxl/pci: Add RCH downstream port error logging Terry Bowman
2023-06-12 21:38   ` Dan Williams
2023-06-16 16:17     ` Terry Bowman
2023-06-16 16:28       ` Terry Bowman
2023-06-07 22:16 ` [PATCH v5 25/26] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Terry Bowman
2023-06-08 22:54   ` kernel test robot
2023-06-12 22:49   ` Dan Williams
2023-06-07 22:16 ` [PATCH v5 26/26] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Terry Bowman
2023-06-08 19:21   ` Bjorn Helgaas
2023-06-12 22:57   ` Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230607221651.2454764-20-terry.bowman@amd.com \
    --to=terry.bowman@amd.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=bhelgaas@google.com \
    --cc=bwidawsk@kernel.org \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rrichter@amd.com \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).