devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrzej Hajda <a.hajda@samsung.com>
To: "open list:DESIGNWARE USB3 DRD IP DRIVER" <linux-usb@vger.kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>, Felipe Balbi <balbi@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Inki Dae <inki.dae@samsung.com>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH 1/2] USB: dwc3: get extcon device by OF graph bindings
Date: Mon, 14 May 2018 10:38:55 +0200	[thread overview]
Message-ID: <1080506a-adaa-193b-24d5-a779486dacc8@samsung.com> (raw)
In-Reply-To: <20180131155718.5237-2-a.hajda@samsung.com>

On 31.01.2018 16:57, Andrzej Hajda wrote:
> extcon device is used to detect host/device connection. Since extcon
> OF property is deprecated, alternative method should be added.
> This method uses OF graph bindings to locate extcon.
>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>

Ping, 3.5 months passed.

Regards
Andrzej

> ---
> Hi all,
>
> This patch implements alternative method to get extcon from DWC3.
> The code works but is hacky, as DWC3 must traverse different DT nodes
> to get extcon, in case of TM2 it is USB-PHY and MUIC, but other
> platforms can have different paths.
> I would be glad if it can be merged as is for now, but additional work
> must be done to make it generic.
> I guess on DT binding side it is OK. So the problem should be addressed
> in the code.
> My rough idea is to implement kind of extcon aliases/forwarder mechanism,
> ie. USB-PHY will expect on its output remote port extcon, and it should register
> extcon-forwarder pointing to this extcon. This way DWC3 can look for the extcon
> on its PHY phandle, and it will receive via forwarding mechanism extcon
> exposed by MUIC.
> As I said this is rough idea for discussion, other propositions are welcome.
>
> Regards
> Andrzej
> ---
>  drivers/usb/dwc3/drd.c | 41 ++++++++++++++++++++++++++++-------------
>  1 file changed, 28 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
> index cc8ab9a8e9d2..eee2eca3d513 100644
> --- a/drivers/usb/dwc3/drd.c
> +++ b/drivers/usb/dwc3/drd.c
> @@ -8,6 +8,7 @@
>   */
>  
>  #include <linux/extcon.h>
> +#include <linux/of_graph.h>
>  
>  #include "debug.h"
>  #include "core.h"
> @@ -38,24 +39,38 @@ static int dwc3_drd_notifier(struct notifier_block *nb,
>  	return NOTIFY_DONE;
>  }
>  
> +struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
> +{
> +	struct device *dev = dwc->dev;
> +	struct device_node *np_phy, *np_conn;
> +	struct extcon_dev *edev;
> +
> +	if (of_property_read_bool(dev->of_node, "extcon"))
> +		return extcon_get_edev_by_phandle(dwc->dev, 0);
> +
> +	np_phy = of_parse_phandle(dev->of_node, "phys", 0);
> +	np_conn = of_graph_get_remote_node(np_phy, -1, -1);
> +	edev = extcon_get_edev_by_of_node(np_conn);
> +	of_node_put(np_conn);
> +	of_node_put(np_phy);
> +
> +	return edev;
> +}
> +
>  int dwc3_drd_init(struct dwc3 *dwc)
>  {
>  	int ret;
>  
> -	if (dwc->dev->of_node) {
> -		if (of_property_read_bool(dwc->dev->of_node, "extcon"))
> -			dwc->edev = extcon_get_edev_by_phandle(dwc->dev, 0);
> -
> -		if (IS_ERR(dwc->edev))
> -			return PTR_ERR(dwc->edev);
> +	dwc->edev = dwc3_get_extcon(dwc);
> +	if (IS_ERR(dwc->edev))
> +		return PTR_ERR(dwc->edev);
>  
> -		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
> -		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
> -					       &dwc->edev_nb);
> -		if (ret < 0) {
> -			dev_err(dwc->dev, "couldn't register cable notifier\n");
> -			return ret;
> -		}
> +	dwc->edev_nb.notifier_call = dwc3_drd_notifier;
> +	ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
> +				       &dwc->edev_nb);
> +	if (ret < 0) {
> +		dev_err(dwc->dev, "couldn't register cable notifier\n");
> +		return ret;
>  	}
>  
>  	dwc3_drd_update(dwc);

  reply	other threads:[~2018-05-14  8:38 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20180131155733eucas1p1ef79b72abaa9f9b4fb38e41b2afa8e24@eucas1p1.samsung.com>
2018-01-31 15:57 ` [PATCH 0/2] USB: dwc3: get extcon device by OF graph bindings Andrzej Hajda
     [not found]   ` <CGME20180131155734eucas1p2b55ad1aab1d5086566dad7a79b25ccf3@eucas1p2.samsung.com>
     [not found]     ` <20180131155718.5237-1-a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2018-01-31 15:57       ` [PATCH 1/2] " Andrzej Hajda
2018-05-14  8:38         ` Andrzej Hajda [this message]
2018-05-15  7:26         ` Felipe Balbi
2018-05-15  7:31           ` Krzysztof Kozlowski
     [not found]   ` <CGME20180131155734eucas1p1c7988ce46f3164329a39d2358d9fada9@eucas1p1.samsung.com>
2018-01-31 15:57     ` [PATCH 2/2] arm64: dts: exynos: add OF graph between USB-PHY and MUIC Andrzej Hajda
     [not found]       ` <20180131155718.5237-3-a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2018-02-01  7:50         ` Krzysztof Kozlowski
     [not found]           ` <CAJKOXPewrA38bxiCKa=pjhVKXys2KRstV2w=+MP3TVi9kkN1kw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-02-01  8:19             ` Andrzej Hajda
2018-02-01  8:43               ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1080506a-adaa-193b-24d5-a779486dacc8@samsung.com \
    --to=a.hajda@samsung.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=balbi@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=inki.dae@samsung.com \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).