From: zhangqing <zhangqing@loongson.cn>
To: Jiaxun Yang <jiaxun.yang@flygoat.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Rob Herring <robh+dt@kernel.org>,
Huacai Chen <chenhuacai@kernel.org>
Cc: devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] MIPS: Loongson64: Add Loongson-2K1000 reset support
Date: Mon, 28 Jun 2021 09:44:58 +0800 [thread overview]
Message-ID: <120495f9-ad22-29a2-a7a5-b9dd933a41ad@loongson.cn> (raw)
In-Reply-To: <08a4ce65-91e0-122e-6f17-b66e08270350@flygoat.com>
On 06/28/2021 09:12 AM, Jiaxun Yang wrote:
>
> 在 2021/6/27 下午3:38, Qing Zhang 写道:
>> Add power management register operations to support reboot and poweroff.
>>
>> Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
>> ---
>>
>> v1-v2:
>> - Add pm block node
>>
>> Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
>>
>> diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>> b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>> index 569e814def83..929e8ddf86eb 100644
>> --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>> +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>> @@ -101,6 +101,14 @@ uart0: serial@1fe00000 {
>> no-loopback-test;
>> };
>> + pm: power-controller {
>> + device_type = "power management";
>
> Hi Qing,
>
> Not compatible?
>
>
>> + reg = <0 0x1fe0700c 0 0x8>,
>> + <0 0x1fe07014 0 0x8>,
>> + <0 0x1fe07030 0 0x8>;
>> + reg-names = "pm1_sts", "pm1_cnt", "rst_cnt";
>> + };
>> +
>> pci@1a000000 {
>> compatible = "loongson,ls2k-pci";
>> device_type = "pci";
>> diff --git a/arch/mips/loongson64/reset.c b/arch/mips/loongson64/reset.c
>> index c97bfdc8c922..ea125e925d44 100644
>> --- a/arch/mips/loongson64/reset.c
>> +++ b/arch/mips/loongson64/reset.c
>> @@ -10,6 +10,7 @@
>> #include <linux/delay.h>
>> #include <linux/init.h>
>> #include <linux/kexec.h>
>> +#include <linux/of_address.h>
>> #include <linux/pm.h>
>> #include <linux/slab.h>
>> @@ -20,12 +21,50 @@
>> #include <loongson.h>
>> #include <boot_param.h>
>> +static char *pm_reg_name[] = {"pm1_sts", "pm1_cnt", "rst_cnt"};
>> +
>> +static void __iomem *get_reg_byname(struct device_node *node, const
>> char *name)
>> +{
>> + int index = of_property_match_string(node, "reg-names", name);
>> +
>> + if (index < 0)
>> + return NULL;
>> +
>> + return of_iomap(node, index);
>> +}
>
> We do have that helper in of_address.h.
>
> Btw, I'd prefer make it as a driver in driver/platform/mips.
>
> Also the approach using PRID to tell protocol type doesn't really make
> sense to me.
>
> You can override _machine_restart callback in diver once FDT node is
> found.
Hi jiaxun,
Thanks for your suggestion,
I will send v3 in the soon.
Thanks.,
Qing
>
> Thanks.
>
> - Jiaxun
>
>> +
>> +static int __init loongson_fdt_reset_init(void)
>> +{
>> + struct device_node *np;
>> + int i;
>> +
>> + np = of_find_node_by_type(NULL, "power management");
>> + if (!np) {
>> + pr_info("Failed to get PM node\n");
>> + return -ENODEV;
>> + }
>> +
>> + for (i = 0; i < sizeof(pm_reg_name)/sizeof(char *); i++) {
>> + pm_reg_name[i] = get_reg_byname(np, pm_reg_name[i]);
>> + if (!pm_reg_name[i])
>> + iounmap(pm_reg_name[i]);
>> + }
>> +
>> + of_node_put(np);
>> + return 0;
>> +}
>> +arch_initcall(loongson_fdt_reset_init);
>> +
>> static void loongson_restart(char *command)
>> {
>> + if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) {
>> + writel(0x1, (void *)pm_reg_name[2]);
>> + } else {
>> + void (*fw_restart)(void) = (void
>> *)loongson_sysconf.restart_addr;
>> - void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
>> + fw_restart();
>> + }
>> - fw_restart();
>> while (1) {
>> if (cpu_wait)
>> cpu_wait();
>> @@ -34,9 +73,18 @@ static void loongson_restart(char *command)
>> static void loongson_poweroff(void)
>> {
>> - void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
>> + if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) {
>> + /* Clear */
>> + writel((readl((void *)pm_reg_name[0]) & 0xffffffff), (void
>> *)pm_reg_name[0]);
>> + /* Sleep Enable | Soft Off*/
>> + writel(GENMASK(12, 10)|BIT(13), (void *)pm_reg_name[1]);
>> + } else {
>> +
>> + void (*fw_poweroff)(void) = (void
>> *)loongson_sysconf.poweroff_addr;
>> +
>> + fw_poweroff();
>> + }
>> - fw_poweroff();
>> while (1) {
>> if (cpu_wait)
>> cpu_wait();
prev parent reply other threads:[~2021-06-28 1:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-27 7:38 [PATCH v2] MIPS: Loongson64: Add Loongson-2K1000 reset support Qing Zhang
2021-06-28 1:12 ` Jiaxun Yang
2021-06-28 1:44 ` zhangqing [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=120495f9-ad22-29a2-a7a5-b9dd933a41ad@loongson.cn \
--to=zhangqing@loongson.cn \
--cc=chenhuacai@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).