Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
* [PATCHv4 0/3] DT Support for TWL4030 power button
@ 2013-10-23 17:54 Sebastian Reichel
  2013-10-23 17:54 ` [PATCHv4 1/3] Input: twl4030-pwrbutton - add device tree support Sebastian Reichel
                   ` (2 more replies)
  0 siblings, 3 replies; 10+ messages in thread
From: Sebastian Reichel @ 2013-10-23 17:54 UTC (permalink / raw)
  To: Sebastian Reichel, Dmitry Torokhov
  Cc: Grant Likely, Rob Herring, Sebastian Reichel, Peter Ujfalusi,
	Sachin Kamat, linux-input, linux-kernel, devicetree

Hi,

This is the fourth iteration of DT support for the TWL4030
power button.

Changes since v3 [0]:
* remove twl4030_pwrbutton_remove function, which is no
  longer needed after devm_ conversion.

[0] https://lkml.org/lkml/2013/10/23/353

-- Sebastian

Sebastian Reichel (3):
  Input: twl4030-pwrbutton - add device tree support
  Input: twl4030-pwrbutton: use dev_err for errors
  Input: twl4030-pwrbutton: simplify driver using devm_*

 .../bindings/input/twl4030-pwrbutton.txt           | 13 ++++++
 drivers/input/misc/twl4030-pwrbutton.c             | 46 +++++++++-------------
 2 files changed, 31 insertions(+), 28 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt

-- 
1.8.4.rc3


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCHv4 1/3] Input: twl4030-pwrbutton - add device tree support
  2013-10-23 17:54 [PATCHv4 0/3] DT Support for TWL4030 power button Sebastian Reichel
@ 2013-10-23 17:54 ` Sebastian Reichel
  2013-10-24  7:47   ` Florian Vaussard
  2013-10-23 17:54 ` [PATCHv4 2/3] Input: twl4030-pwrbutton: use dev_err for errors Sebastian Reichel
  2013-10-23 17:54 ` [PATCHv4 3/3] Input: twl4030-pwrbutton: simplify driver using devm_* Sebastian Reichel
  2 siblings, 1 reply; 10+ messages in thread
From: Sebastian Reichel @ 2013-10-23 17:54 UTC (permalink / raw)
  To: Sebastian Reichel, Dmitry Torokhov
  Cc: Grant Likely, Rob Herring, Sebastian Reichel, Peter Ujfalusi,
	Sachin Kamat, linux-input, linux-kernel, devicetree

Add device tree support for twl4030 power button driver.

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
 .../devicetree/bindings/input/twl4030-pwrbutton.txt      | 13 +++++++++++++
 drivers/input/misc/twl4030-pwrbutton.c                   | 16 ++++++++++++----
 2 files changed, 25 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt

diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
new file mode 100644
index 0000000..945ec74
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
@@ -0,0 +1,13 @@
+* TWL4030's pwrbutton device tree bindings
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
+- interrupt: should be one of the following
+   - <8>: For controllers compatible with twl4030
+
+Example:
+	twl_pwrbutton: pwrbutton {
+		compatible = "ti,twl4030-pwrbutton";
+		interrupts = <8>;
+	};
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index b9a05fd..a3a0fe3 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -52,7 +52,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr)
 	return IRQ_HANDLED;
 }
 
-static int __init twl4030_pwrbutton_probe(struct platform_device *pdev)
+static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 {
 	struct input_dev *pwr;
 	int irq = platform_get_irq(pdev, 0);
@@ -106,16 +106,24 @@ static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id twl4030_pwrbutton_dt_match_table[] = {
+       { .compatible = "ti,twl4030-pwrbutton" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, twl4030_pwrbutton_dt_match_table);
+#endif
+
 static struct platform_driver twl4030_pwrbutton_driver = {
+	.probe		= twl4030_pwrbutton_probe,
 	.remove		= __exit_p(twl4030_pwrbutton_remove),
 	.driver		= {
 		.name	= "twl4030_pwrbutton",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(twl4030_pwrbutton_dt_match_table),
 	},
 };
-
-module_platform_driver_probe(twl4030_pwrbutton_driver,
-			twl4030_pwrbutton_probe);
+module_platform_driver(twl4030_pwrbutton_driver);
 
 MODULE_ALIAS("platform:twl4030_pwrbutton");
 MODULE_DESCRIPTION("Triton2 Power Button");
-- 
1.8.4.rc3

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCHv4 2/3] Input: twl4030-pwrbutton: use dev_err for errors
  2013-10-23 17:54 [PATCHv4 0/3] DT Support for TWL4030 power button Sebastian Reichel
  2013-10-23 17:54 ` [PATCHv4 1/3] Input: twl4030-pwrbutton - add device tree support Sebastian Reichel
@ 2013-10-23 17:54 ` Sebastian Reichel
  2013-10-23 18:17   ` Joe Perches
  2013-10-23 17:54 ` [PATCHv4 3/3] Input: twl4030-pwrbutton: simplify driver using devm_* Sebastian Reichel
  2 siblings, 1 reply; 10+ messages in thread
From: Sebastian Reichel @ 2013-10-23 17:54 UTC (permalink / raw)
  To: Sebastian Reichel, Dmitry Torokhov
  Cc: Grant Likely, Rob Herring, Sebastian Reichel, Peter Ujfalusi,
	Sachin Kamat, linux-input, linux-kernel, devicetree

Use dev_err() to output errors instead of dev_dbg().

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
 drivers/input/misc/twl4030-pwrbutton.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index a3a0fe3..3efbb13 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -60,7 +60,7 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 
 	pwr = input_allocate_device();
 	if (!pwr) {
-		dev_dbg(&pdev->dev, "Can't allocate power button\n");
+		dev_err(&pdev->dev, "Can't allocate power button\n");
 		return -ENOMEM;
 	}
 
@@ -74,13 +74,13 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			"twl4030_pwrbutton", pwr);
 	if (err < 0) {
-		dev_dbg(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
+		dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
 		goto free_input_dev;
 	}
 
 	err = input_register_device(pwr);
 	if (err) {
-		dev_dbg(&pdev->dev, "Can't register power button: %d\n", err);
+		dev_err(&pdev->dev, "Can't register power button: %d\n", err);
 		goto free_irq;
 	}
 
-- 
1.8.4.rc3

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCHv4 3/3] Input: twl4030-pwrbutton: simplify driver using devm_*
  2013-10-23 17:54 [PATCHv4 0/3] DT Support for TWL4030 power button Sebastian Reichel
  2013-10-23 17:54 ` [PATCHv4 1/3] Input: twl4030-pwrbutton - add device tree support Sebastian Reichel
  2013-10-23 17:54 ` [PATCHv4 2/3] Input: twl4030-pwrbutton: use dev_err for errors Sebastian Reichel
@ 2013-10-23 17:54 ` Sebastian Reichel
  2 siblings, 0 replies; 10+ messages in thread
From: Sebastian Reichel @ 2013-10-23 17:54 UTC (permalink / raw)
  To: Sebastian Reichel, Dmitry Torokhov
  Cc: Grant Likely, Rob Herring, Sebastian Reichel, Peter Ujfalusi,
	Sachin Kamat, linux-input, linux-kernel, devicetree

Use managed irq resource to simplify the driver.

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
 drivers/input/misc/twl4030-pwrbutton.c | 26 ++++----------------------
 1 file changed, 4 insertions(+), 22 deletions(-)

diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index 3efbb13..da30af0 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -58,7 +58,7 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 	int irq = platform_get_irq(pdev, 0);
 	int err;
 
-	pwr = input_allocate_device();
+	pwr = devm_input_allocate_device(&pdev->dev);
 	if (!pwr) {
 		dev_err(&pdev->dev, "Can't allocate power button\n");
 		return -ENOMEM;
@@ -70,40 +70,23 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 	pwr->phys = "twl4030_pwrbutton/input0";
 	pwr->dev.parent = &pdev->dev;
 
-	err = request_threaded_irq(irq, NULL, powerbutton_irq,
+	err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			"twl4030_pwrbutton", pwr);
 	if (err < 0) {
 		dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
-		goto free_input_dev;
+		return err;
 	}
 
 	err = input_register_device(pwr);
 	if (err) {
 		dev_err(&pdev->dev, "Can't register power button: %d\n", err);
-		goto free_irq;
+		return err;
 	}
 
 	platform_set_drvdata(pdev, pwr);
 
 	return 0;
-
-free_irq:
-	free_irq(irq, pwr);
-free_input_dev:
-	input_free_device(pwr);
-	return err;
-}
-
-static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
-{
-	struct input_dev *pwr = platform_get_drvdata(pdev);
-	int irq = platform_get_irq(pdev, 0);
-
-	free_irq(irq, pwr);
-	input_unregister_device(pwr);
-
-	return 0;
 }
 
 #if IS_ENABLED(CONFIG_OF)
@@ -116,7 +99,6 @@ MODULE_DEVICE_TABLE(of, twl4030_pwrbutton_dt_match_table);
 
 static struct platform_driver twl4030_pwrbutton_driver = {
 	.probe		= twl4030_pwrbutton_probe,
-	.remove		= __exit_p(twl4030_pwrbutton_remove),
 	.driver		= {
 		.name	= "twl4030_pwrbutton",
 		.owner	= THIS_MODULE,
-- 
1.8.4.rc3

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv4 2/3] Input: twl4030-pwrbutton: use dev_err for errors
  2013-10-23 17:54 ` [PATCHv4 2/3] Input: twl4030-pwrbutton: use dev_err for errors Sebastian Reichel
@ 2013-10-23 18:17   ` Joe Perches
  2013-10-23 19:31     ` Sebastian Reichel
  0 siblings, 1 reply; 10+ messages in thread
From: Joe Perches @ 2013-10-23 18:17 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Sebastian Reichel, Dmitry Torokhov, Grant Likely, Rob Herring,
	Peter Ujfalusi, Sachin Kamat, linux-input, linux-kernel,
	devicetree

On Wed, 2013-10-23 at 19:54 +0200, Sebastian Reichel wrote:
> Use dev_err() to output errors instead of dev_dbg().
[]
> diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
[]
> @@ -60,7 +60,7 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
>  
>  	pwr = input_allocate_device();
>  	if (!pwr) {
> -		dev_dbg(&pdev->dev, "Can't allocate power button\n");
> +		dev_err(&pdev->dev, "Can't allocate power button\n");
>  		return -ENOMEM;
>  	}

input_allocate_device uses kzalloc and it will emit a
standardized OOM message along with a dump_stack()
so this dev_err/dev_dbg is redundant and not necessary.



^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv4 2/3] Input: twl4030-pwrbutton: use dev_err for errors
  2013-10-23 18:17   ` Joe Perches
@ 2013-10-23 19:31     ` Sebastian Reichel
       [not found]       ` <20131023193112.GB30437-SfvFxonMDyemK9LvCR3Hrw@public.gmane.org>
  0 siblings, 1 reply; 10+ messages in thread
From: Sebastian Reichel @ 2013-10-23 19:31 UTC (permalink / raw)
  To: Joe Perches
  Cc: Dmitry Torokhov, Grant Likely, Rob Herring, Peter Ujfalusi,
	Sachin Kamat, linux-input, linux-kernel, devicetree


[-- Attachment #1: Type: text/plain, Size: 883 bytes --]

On Wed, Oct 23, 2013 at 11:17:46AM -0700, Joe Perches wrote:
> On Wed, 2013-10-23 at 19:54 +0200, Sebastian Reichel wrote:
> > Use dev_err() to output errors instead of dev_dbg().
> []
> > diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
> []
> > @@ -60,7 +60,7 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
> >  
> >  	pwr = input_allocate_device();
> >  	if (!pwr) {
> > -		dev_dbg(&pdev->dev, "Can't allocate power button\n");
> > +		dev_err(&pdev->dev, "Can't allocate power button\n");
> >  		return -ENOMEM;
> >  	}
> 
> input_allocate_device uses kzalloc and it will emit a
> standardized OOM message along with a dump_stack()
> so this dev_err/dev_dbg is redundant and not necessary.

I saw you sent a big patchset changing this for all drivers.
Should I drop this patch?

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv4 2/3] Input: twl4030-pwrbutton: use dev_err for errors
       [not found]       ` <20131023193112.GB30437-SfvFxonMDyemK9LvCR3Hrw@public.gmane.org>
@ 2013-10-23 19:38         ` Joe Perches
  0 siblings, 0 replies; 10+ messages in thread
From: Joe Perches @ 2013-10-23 19:38 UTC (permalink / raw)
  To: Sebastian Reichel
  Cc: Dmitry Torokhov, Grant Likely, Rob Herring, Peter Ujfalusi,
	Sachin Kamat, linux-input-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA

On Wed, 2013-10-23 at 21:31 +0200, Sebastian Reichel wrote:
> On Wed, Oct 23, 2013 at 11:17:46AM -0700, Joe Perches wrote:
> > On Wed, 2013-10-23 at 19:54 +0200, Sebastian Reichel wrote:
> > > Use dev_err() to output errors instead of dev_dbg().
> > []
> > > diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
> > []
> > > @@ -60,7 +60,7 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
> > >  
> > >  	pwr = input_allocate_device();
> > >  	if (!pwr) {
> > > -		dev_dbg(&pdev->dev, "Can't allocate power button\n");
> > > +		dev_err(&pdev->dev, "Can't allocate power button\n");
> > >  		return -ENOMEM;
> > >  	}
> > 
> > input_allocate_device uses kzalloc and it will emit a
> > standardized OOM message along with a dump_stack()
> > so this dev_err/dev_dbg is redundant and not necessary.
> 
> I saw you sent a big patchset changing this for all drivers.
> Should I drop this patch?

I think the 2 other bits of this patch are fine.
Maybe resend with this section dropped?

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv4 1/3] Input: twl4030-pwrbutton - add device tree support
  2013-10-23 17:54 ` [PATCHv4 1/3] Input: twl4030-pwrbutton - add device tree support Sebastian Reichel
@ 2013-10-24  7:47   ` Florian Vaussard
  2013-10-24  8:38     ` Sebastian Reichel
  0 siblings, 1 reply; 10+ messages in thread
From: Florian Vaussard @ 2013-10-24  7:47 UTC (permalink / raw)
  To: Sebastian Reichel, Sebastian Reichel, Dmitry Torokhov
  Cc: Grant Likely, Rob Herring, Peter Ujfalusi, Sachin Kamat,
	linux-input, linux-kernel, devicetree

Hello Sebastian,

On 10/23/2013 07:54 PM, Sebastian Reichel wrote:
> Add device tree support for twl4030 power button driver.
> 
> Signed-off-by: Sebastian Reichel <sre@debian.org>
> ---
>  .../devicetree/bindings/input/twl4030-pwrbutton.txt      | 13 +++++++++++++
>  drivers/input/misc/twl4030-pwrbutton.c                   | 16 ++++++++++++----
>  2 files changed, 25 insertions(+), 4 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
> new file mode 100644
> index 0000000..945ec74
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
> @@ -0,0 +1,13 @@
> +* TWL4030's pwrbutton device tree bindings
> +
> +Required SoC Specific Properties:
> +- compatible: should be one of the following
> +   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
> +- interrupt: should be one of the following
> +   - <8>: For controllers compatible with twl4030

This is <8> for your particular case, but it will depend on your SoC,
won't it?
Moreover, this property will be most likely inherited from the root twl
node,
so I do not see the need to document it here. See:

Documentation/devicetree/bindings/mfd/twl-familly.txt

> +
> +Example:
> +	twl_pwrbutton: pwrbutton {
> +		compatible = "ti,twl4030-pwrbutton";
> +		interrupts = <8>;
> +	};

You are missing the root twl node here, no?

> diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
> index b9a05fd..a3a0fe3 100644
> --- a/drivers/input/misc/twl4030-pwrbutton.c
> +++ b/drivers/input/misc/twl4030-pwrbutton.c

Missing #include <linux/of.h> ?

> @@ -52,7 +52,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr)
>  	return IRQ_HANDLED;
>  }
>  
> -static int __init twl4030_pwrbutton_probe(struct platform_device *pdev)
> +static int twl4030_pwrbutton_probe(struct platform_device *pdev)
>  {
>  	struct input_dev *pwr;
>  	int irq = platform_get_irq(pdev, 0);
> @@ -106,16 +106,24 @@ static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +#if IS_ENABLED(CONFIG_OF)
> +static const struct of_device_id twl4030_pwrbutton_dt_match_table[] = {
> +       { .compatible = "ti,twl4030-pwrbutton" },
> +       {},
> +};
> +MODULE_DEVICE_TABLE(of, twl4030_pwrbutton_dt_match_table);
> +#endif
> +
>  static struct platform_driver twl4030_pwrbutton_driver = {
> +	.probe		= twl4030_pwrbutton_probe,
>  	.remove		= __exit_p(twl4030_pwrbutton_remove),
>  	.driver		= {
>  		.name	= "twl4030_pwrbutton",
>  		.owner	= THIS_MODULE,
> +		.of_match_table = of_match_ptr(twl4030_pwrbutton_dt_match_table),
>  	},
>  };
> -
> -module_platform_driver_probe(twl4030_pwrbutton_driver,
> -			twl4030_pwrbutton_probe);
> +module_platform_driver(twl4030_pwrbutton_driver);
>  
>  MODULE_ALIAS("platform:twl4030_pwrbutton");
>  MODULE_DESCRIPTION("Triton2 Power Button");
> 

Best regards,

Florian

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv4 1/3] Input: twl4030-pwrbutton - add device tree support
  2013-10-24  7:47   ` Florian Vaussard
@ 2013-10-24  8:38     ` Sebastian Reichel
  2013-10-24  9:16       ` Florian Vaussard
  0 siblings, 1 reply; 10+ messages in thread
From: Sebastian Reichel @ 2013-10-24  8:38 UTC (permalink / raw)
  To: Florian Vaussard
  Cc: Dmitry Torokhov, Grant Likely, Rob Herring, Peter Ujfalusi,
	Sachin Kamat, linux-input, linux-kernel, devicetree


[-- Attachment #1: Type: text/plain, Size: 1580 bytes --]

Hi Florian,

On Thu, Oct 24, 2013 at 09:47:33AM +0200, Florian Vaussard wrote:
> > +Required SoC Specific Properties:
> > +- compatible: should be one of the following
> > +   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
> > +- interrupt: should be one of the following
> > +   - <8>: For controllers compatible with twl4030
> 
> This is <8> for your particular case, but it will depend on your
> SoC, won't it?  Moreover, this property will be most likely
> inherited from the root twl node, so I do not see the need to
> document it here. See:
> 
> Documentation/devicetree/bindings/mfd/twl-familly.txt

No. This is an internal twl4030 interrupt. TWL4030 functions
itself as an interrupt controller.

> > +
> > +Example:
> > +	twl_pwrbutton: pwrbutton {
> > +		compatible = "ti,twl4030-pwrbutton";
> > +		interrupts = <8>;
> > +	};
> 
> You are missing the root twl node here, no?

So should I document it like this?

twl4030 {
    compatible = "ti,twl4030";

    pwrbutton {
        compatible = "ti,twl4030-pwrbutton";
        interrupts = <8>;
    };
};

> > diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
> > index b9a05fd..a3a0fe3 100644
> > --- a/drivers/input/misc/twl4030-pwrbutton.c
> > +++ b/drivers/input/misc/twl4030-pwrbutton.c
> 
> Missing #include <linux/of.h> ?

It's included indirectly, but I should probably add a direct
include. Thanks.

> Best regards,

Thanks for the comments. I will sent out an updated patchset later.

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv4 1/3] Input: twl4030-pwrbutton - add device tree support
  2013-10-24  8:38     ` Sebastian Reichel
@ 2013-10-24  9:16       ` Florian Vaussard
  0 siblings, 0 replies; 10+ messages in thread
From: Florian Vaussard @ 2013-10-24  9:16 UTC (permalink / raw)
  To: Dmitry Torokhov, Grant Likely, Rob Herring, Peter Ujfalusi,
	Sachin Kamat, linux-input, linux-kernel, devicetree

Hello,

On 10/24/2013 10:38 AM, Sebastian Reichel wrote:
> Hi Florian,
>
> On Thu, Oct 24, 2013 at 09:47:33AM +0200, Florian Vaussard wrote:
>>> +Required SoC Specific Properties:
>>> +- compatible: should be one of the following
>>> +   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
>>> +- interrupt: should be one of the following
>>> +   - <8>: For controllers compatible with twl4030
>>
>> This is <8> for your particular case, but it will depend on your
>> SoC, won't it?  Moreover, this property will be most likely
>> inherited from the root twl node, so I do not see the need to
>> document it here. See:
>>
>> Documentation/devicetree/bindings/mfd/twl-familly.txt
>
> No. This is an internal twl4030 interrupt. TWL4030 functions
> itself as an interrupt controller.
>

So if it does not belong to the TWL parent, where is it used in your code?
You should be parsing this property, so you can set up the IRQ properly.
I am a bit confused here. If it is fixed, no need for a OF property.

>>> +
>>> +Example:
>>> +	twl_pwrbutton: pwrbutton {
>>> +		compatible = "ti,twl4030-pwrbutton";
>>> +		interrupts = <8>;
>>> +	};
>>
>> You are missing the root twl node here, no?
>
> So should I document it like this?
>

IMHO it is more clear for the user.

> twl4030 {
>     compatible = "ti,twl4030";
>
>     pwrbutton {
>         compatible = "ti,twl4030-pwrbutton";
>         interrupts = <8>;
>     };
> };

Nit, but existing documentations follow the "name@address"
form for the root node, as the TWL is on an I2C bus.
Either it is already defined, thus you should use "&twl4030"
to reference it, or you create the TWL node and something like
"twl4030@48" should be used.

For an example, you can refer to existing bindings, like
Documentation/devicetree/bindings/mfd/twl4030-audio.txt.

Best regards,

Florian

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-10-23 17:54 [PATCHv4 0/3] DT Support for TWL4030 power button Sebastian Reichel
2013-10-23 17:54 ` [PATCHv4 1/3] Input: twl4030-pwrbutton - add device tree support Sebastian Reichel
2013-10-24  7:47   ` Florian Vaussard
2013-10-24  8:38     ` Sebastian Reichel
2013-10-24  9:16       ` Florian Vaussard
2013-10-23 17:54 ` [PATCHv4 2/3] Input: twl4030-pwrbutton: use dev_err for errors Sebastian Reichel
2013-10-23 18:17   ` Joe Perches
2013-10-23 19:31     ` Sebastian Reichel
     [not found]       ` <20131023193112.GB30437-SfvFxonMDyemK9LvCR3Hrw@public.gmane.org>
2013-10-23 19:38         ` Joe Perches
2013-10-23 17:54 ` [PATCHv4 3/3] Input: twl4030-pwrbutton: simplify driver using devm_* Sebastian Reichel

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git
	git clone --mirror https://lore.kernel.org/linux-devicetree/1 linux-devicetree/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git