devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Mark Brown <broonie@kernel.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Olof Johansson <olof@lixom.net>, Chris Zhong <zyw@rock-chips.com>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Abhilash Kesavan <kesavan.abhilash@gmail.com>,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,
	Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: [PATCH v4 14/14] ARM: dts: Configure regulators for suspend on exynos Peach boards
Date: Mon,  3 Nov 2014 15:40:49 +0100	[thread overview]
Message-ID: <1415025649-8119-15-git-send-email-javier.martinez@collabora.co.uk> (raw)
In-Reply-To: <1415025649-8119-1-git-send-email-javier.martinez@collabora.co.uk>

The regulator core now has support to choose if a regulator
has to be enabled or disabled during system suspend and also
the supports changing the regulator operating mode during
runtime and when the system enters into sleep mode.

To lower power during suspend, configure the regulators state
using the same configuration found in the ChromeOS 3.8 kernel.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---

Changes in v4: None

Changes in v3:
 - Use the standard suspend state binding as suggested by Mark Brown.

 arch/arm/boot/dts/exynos5420-peach-pit.dts | 81 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos5800-peach-pi.dts  | 81 ++++++++++++++++++++++++++++++
 2 files changed, 162 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 9a050e1..8b744c7 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -13,6 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
 #include "exynos5420.dtsi"
 
 / {
@@ -192,6 +193,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck2_reg: BUCK2 {
@@ -201,6 +205,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck3_reg: BUCK3 {
@@ -210,6 +217,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck4_reg: BUCK4 {
@@ -219,6 +229,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck5_reg: BUCK5 {
@@ -227,6 +240,9 @@
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck6_reg: BUCK6 {
@@ -236,6 +252,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck7_reg: BUCK7 {
@@ -244,6 +263,9 @@
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			buck8_reg: BUCK8 {
@@ -252,6 +274,9 @@
 				regulator-max-microvolt = <2850000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck9_reg: BUCK9 {
@@ -260,6 +285,9 @@
 				regulator-max-microvolt = <2000000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			buck10_reg: BUCK10 {
@@ -268,6 +296,9 @@
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			ldo1_reg: LDO1 {
@@ -275,6 +306,10 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			ldo2_reg: LDO2 {
@@ -288,6 +323,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			vqmmc_sdcard: ldo4_reg: LDO4 {
@@ -295,6 +334,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <2800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo5_reg: LDO5 {
@@ -302,6 +344,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo6_reg: LDO6 {
@@ -309,6 +354,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo7_reg: LDO7 {
@@ -322,6 +370,9 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo9_reg: LDO9 {
@@ -329,6 +380,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			ldo10_reg: LDO10 {
@@ -336,6 +391,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo11_reg: LDO11 {
@@ -343,6 +401,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			ldo12_reg: LDO12 {
@@ -350,6 +412,9 @@
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo13_reg: LDO13 {
@@ -357,6 +422,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			ldo14_reg: LDO14 {
@@ -364,6 +433,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo15_reg: LDO15 {
@@ -371,6 +443,9 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo17_reg: LDO17 {
@@ -378,6 +453,9 @@
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1400000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo18_reg: LDO18 {
@@ -451,6 +529,9 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo32_reg: LDO32 {
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index e8fdda8..df7fbde 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -13,6 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
 #include "exynos5800.dtsi"
 
 / {
@@ -191,6 +192,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck2_reg: BUCK2 {
@@ -200,6 +204,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck3_reg: BUCK3 {
@@ -209,6 +216,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck4_reg: BUCK4 {
@@ -218,6 +228,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck5_reg: BUCK5 {
@@ -226,6 +239,9 @@
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck6_reg: BUCK6 {
@@ -235,6 +251,9 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck7_reg: BUCK7 {
@@ -243,6 +262,9 @@
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			buck8_reg: BUCK8 {
@@ -251,6 +273,9 @@
 				regulator-max-microvolt = <2850000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck9_reg: BUCK9 {
@@ -259,6 +284,9 @@
 				regulator-max-microvolt = <2000000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			buck10_reg: BUCK10 {
@@ -267,6 +295,9 @@
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			ldo1_reg: LDO1 {
@@ -274,6 +305,10 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			ldo2_reg: LDO2 {
@@ -287,6 +322,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			vqmmc_sdcard: ldo4_reg: LDO4 {
@@ -294,6 +333,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <2800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo5_reg: LDO5 {
@@ -301,6 +343,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo6_reg: LDO6 {
@@ -308,6 +353,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo7_reg: LDO7 {
@@ -321,6 +369,9 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo9_reg: LDO9 {
@@ -328,6 +379,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			ldo10_reg: LDO10 {
@@ -335,6 +390,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo11_reg: LDO11 {
@@ -342,6 +400,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			ldo12_reg: LDO12 {
@@ -349,6 +411,9 @@
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo13_reg: LDO13 {
@@ -356,6 +421,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
 			};
 
 			ldo14_reg: LDO14 {
@@ -363,6 +432,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo15_reg: LDO15 {
@@ -370,6 +442,9 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo17_reg: LDO17 {
@@ -377,6 +452,9 @@
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1400000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo18_reg: LDO18 {
@@ -450,6 +528,9 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo32_reg: LDO32 {
-- 
2.1.0

  parent reply	other threads:[~2014-11-03 14:40 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-03 14:40 [PATCH v4 00/14] Add max77802 regulator operating mode support Javier Martinez Canillas
2014-11-03 14:40 ` [PATCH v4 01/14] regulator: Document binding for initial and suspend modes Javier Martinez Canillas
2014-11-03 14:40 ` [PATCH v4 02/14] regulator: Add function to map modes to struct regulator_desc Javier Martinez Canillas
2014-11-04 10:31   ` Krzysztof Kozlowski
2014-11-04 11:02     ` Javier Martinez Canillas
2014-11-04 11:09       ` Krzysztof Kozlowski
2014-11-03 14:40 ` [PATCH v4 03/14] regulator: of: Add regulator desc param to of_get_regulator_init_data() Javier Martinez Canillas
2014-11-03 15:33   ` Mark Brown
2014-11-03 15:48     ` Javier Martinez Canillas
2014-11-03 15:59       ` Mark Brown
2014-11-03 16:11         ` Javier Martinez Canillas
2014-11-03 14:40 ` [PATCH v4 04/14] regulator: of: Pass the regulator description in the match table Javier Martinez Canillas
2014-11-03 14:40 ` [PATCH v4 06/14] regulator: max77686: zero-initialize regulator " Javier Martinez Canillas
2014-11-03 15:55   ` Mark Brown
2014-11-03 14:40 ` [PATCH v4 07/14] regulator: max77802: " Javier Martinez Canillas
2014-11-03 15:55   ` Mark Brown
     [not found] ` <1415025649-8119-1-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-11-03 14:40   ` [PATCH v4 05/14] regulator: max1586: zero-initialize regulator match table array Javier Martinez Canillas
2014-11-03 15:41     ` Mark Brown
2014-11-03 15:51       ` Javier Martinez Canillas
2014-11-03 14:40   ` [PATCH v4 08/14] regulator: max8660: " Javier Martinez Canillas
2014-11-03 15:56     ` Mark Brown
2014-11-04 10:44   ` [PATCH v4 00/14] Add max77802 regulator operating mode support Krzysztof Kozlowski
2014-11-04 10:51     ` Javier Martinez Canillas
2014-11-04 11:04       ` Krzysztof Kozlowski
2014-11-03 14:40 ` [PATCH v4 09/14] regulator: s2mpa01: zero-initialize regulator match table array Javier Martinez Canillas
2014-11-03 15:56   ` Mark Brown
2014-11-03 14:40 ` [PATCH v4 10/14] regulator: of: Add support for parsing initial and suspend modes Javier Martinez Canillas
     [not found]   ` <1415025649-8119-11-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-11-04 10:41     ` Krzysztof Kozlowski
2014-11-04 11:07       ` Javier Martinez Canillas
2014-11-03 14:40 ` [PATCH v4 11/14] regulator: max77802: Document binding for regulator operating modes Javier Martinez Canillas
2014-11-04 10:50   ` Krzysztof Kozlowski
2014-11-04 11:10     ` Javier Martinez Canillas
2014-11-03 14:40 ` [PATCH v4 12/14] regulator: max77802: Use unsigned int for modes in max77802_map_mode() Javier Martinez Canillas
2014-11-03 16:08   ` Mark Brown
2014-11-03 14:40 ` [PATCH v4 13/14] regulator: max77802: Set regulator modes translation callback Javier Martinez Canillas
2014-11-03 14:40 ` Javier Martinez Canillas [this message]
2014-11-03 15:54 ` [PATCH v4 00/14] Add max77802 regulator operating mode support Mark Brown
2014-11-03 16:07   ` Mark Brown
2014-11-03 16:08   ` Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1415025649-8119-15-git-send-email-javier.martinez@collabora.co.uk \
    --to=javier.martinez@collabora.co.uk \
    --cc=broonie@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=k.kozlowski@samsung.com \
    --cc=kesavan.abhilash@gmail.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=zyw@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).