From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thierry Reding Subject: [PATCH v10 7/9] dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support Date: Fri, 4 Mar 2016 17:19:37 +0100 Message-ID: <1457108379-20794-7-git-send-email-thierry.reding@gmail.com> References: <1457108379-20794-1-git-send-email-thierry.reding@gmail.com> Return-path: In-Reply-To: <1457108379-20794-1-git-send-email-thierry.reding@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Greg Kroah-Hartman , Mathias Nyman Cc: Thierry Reding , Stephen Warren , Alexandre Courbot , Andrew Bresticker , linux-tegra@vger.kernel.org, devicetree@vger.kernel.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala List-Id: devicetree@vger.kernel.org From: Thierry Reding Extend the Tegra XUSB controller device tree binding with Tegra210 support. Signed-off-by: Thierry Reding --- .../devicetree/bindings/usb/nvidia,tegra124-xusb.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt index 79616f9268d8..d28295a3e55f 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt @@ -9,6 +9,7 @@ Required properties: - compatible: Must be: - Tegra124: "nvidia,tegra124-xusb" - Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb" + - Tegra210: "nvidia,tegra210-xusb" - reg: Must contain the base and length of the xHCI host registers, XUSB FPCI registers and XUSB IPFS registers. - reg-names: Must contain the following entries: @@ -50,6 +51,15 @@ For Tegra124 and Tegra132: - hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3 V. - hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. +For Tegra210: +- dvddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V. +- hvddio-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. +- avdd-usb-supply: USB controller power supply. Must supply 3.3 V. +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. +- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. +- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. +- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. + Optional properties: -------------------- - phys: Must contain an entry for each entry in phy-names. @@ -58,6 +68,8 @@ Optional properties: following PHYs are available: - Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1 - Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1 + - Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2, + usb3-3 Example: -------- -- 2.7.1