From: Chanwoo Choi <cw00.choi@samsung.com>
To: k.kozlowski@samsung.com, kgene@kernel.org,
s.nawrocki@samsung.com, tomasz.figa@gmail.com
Cc: jh80.chung@samsung.com, andi.shyti@samsung.com,
inki.dae@samsung.com, sw0312.kim@samsung.com,
pankaj.dubey@samsung.com, cw00.choi@samsung.com,
linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v3 0/8] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file
Date: Tue, 15 Mar 2016 16:38:02 +0900 [thread overview]
Message-ID: <1458027490-13787-1-git-send-email-cw00.choi@samsung.com> (raw)
This patchset add the support for Device Tree source for Samsung ARTIK5 module[1]
based on Exynos3250 SoC and development board[2]. The ARTIK5 module includes
the follwoing devices:
- Application Processor (Samsung Exynos3250)
- WiFi/BT Combo chip
- PMIC (Samsung S2MPS14)
- eMMC (4GB)
- DRAM LPDDR3 (512MB)
- Connectors pin (60 Pins x 3 set)
Also, this patchset add the ARTIK5 development board[2] dts file which includes
the ARTIK5 module[1] and have the devices such as sound codec, sd card port,
ethernet port, uart port and so on.
[1] https://www.artik.io/hardware/artik-5
[2] http://www.digikey.com/product-detail/en/SIP-KITNXB001/1510-1316-ND/5825102
Changes from v2:
(https://lkml.org/lkml/2016/3/14/910)
- Add reviewed tag by Krzysztof Kozlowski for all patches
- Include the separate patch1[3] in patchset because patch5 depend on patch1[3]
[3] https://lkml.org/lkml/2016/3/14/245
- Fix the order issue in exynos3250-artik5.dtsi
- Use lowercase for hex address in exynos3250-artik5.dtsi
Changes from v1:
(https://lkml.org/lkml/2016/3/13/215)
- Change the board name from 'artik5-devel' to 'artik5-eval'
- Merge the patch6/7/8 to patch5
- Add the new board information to samsung-boards.txt[1]
[1] Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
- Fix minor coding style issue and remove 'wakeup' property
- Remove 'broken-cd' and 'desc-num' property from mshc_0 node
- Handle the LDO11/LDO12 by using XMMC0CDn pin (GPK0-2 gpio) for MMC device
and fix the ldo number of 'vmmc-supply' property.
- Add the 'vqmmc-supply' property for MSHC2
- Drop the patch10 for PPMU node
- Add the new patch to initialize the MMC2 gpio pin on monk board
Chanwoo Choi (5):
ARM: dts: Add initial pin configuration for exynos3250-rinato
clk: samsung: exynos3250: Add MMC2 clock
ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk
ARM: dts: Add MSHC2 dt node for Exynos3250 SoC
ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module
Jaehoon Chung (1):
ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board
Pankaj Dubey (2):
clk: samsung: exynos3250: Add UART2 clock
ARM: dts: Add UART2 dt node for Exynos3250 SoC
.../bindings/arm/samsung/samsung-boards.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos3250-artik5-eval.dts | 43 +++
arch/arm/boot/dts/exynos3250-artik5.dtsi | 334 +++++++++++++++++++++
arch/arm/boot/dts/exynos3250-monk.dts | 12 +-
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 80 +++++
arch/arm/boot/dts/exynos3250-rinato.dts | 71 ++++-
arch/arm/boot/dts/exynos3250.dtsi | 25 ++
drivers/clk/samsung/clk-exynos3250.c | 15 +
include/dt-bindings/clock/exynos3250.h | 11 +-
10 files changed, 590 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos3250-artik5-eval.dts
create mode 100644 arch/arm/boot/dts/exynos3250-artik5.dtsi
--
1.9.1
next reply other threads:[~2016-03-15 7:38 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-15 7:38 Chanwoo Choi [this message]
2016-03-15 7:38 ` [PATCH v3 1/8] ARM: dts: Add initial pin configuration for exynos3250-rinato Chanwoo Choi
2016-03-15 7:38 ` [PATCH v3 2/8] clk: samsung: exynos3250: Add UART2 clock Chanwoo Choi
2016-03-24 23:39 ` Chanwoo Choi
2016-03-15 7:38 ` [PATCH v3 3/8] clk: samsung: exynos3250: Add MMC2 clock Chanwoo Choi
2016-03-24 23:39 ` Chanwoo Choi
2016-03-25 9:50 ` Sylwester Nawrocki
2016-03-28 0:44 ` Chanwoo Choi
[not found] ` <56F87E83.7060100-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-03-29 1:48 ` Krzysztof Kozlowski
2016-03-30 9:37 ` Sylwester Nawrocki
[not found] ` <56F9DEE6.8020203-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-03-31 11:04 ` Sylwester Nawrocki
2016-04-01 0:15 ` Krzysztof Kozlowski
2016-03-30 9:30 ` Sylwester Nawrocki
2016-03-15 7:38 ` [PATCH v3 4/8] ARM: dts: Add UART2 dt node for Exynos3250 SoC Chanwoo Choi
2016-03-15 7:38 ` [PATCH v3 5/8] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk Chanwoo Choi
[not found] ` <1458027490-13787-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-03-15 7:38 ` [PATCH v3 6/8] ARM: dts: Add MSHC2 dt node for Exynos3250 SoC Chanwoo Choi
2016-03-15 7:38 ` [PATCH v3 7/8] ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module Chanwoo Choi
2016-03-18 21:01 ` Rob Herring
2016-03-19 11:44 ` Chanwoo Choi
2016-03-15 7:38 ` [PATCH v3 8/8] ARM: dts: Add MSHC2 dt node for SD card for exynos3250-artik5-eval board Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458027490-13787-1-git-send-email-cw00.choi@samsung.com \
--to=cw00.choi@samsung.com \
--cc=andi.shyti@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=inki.dae@samsung.com \
--cc=jh80.chung@samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=pankaj.dubey@samsung.com \
--cc=s.nawrocki@samsung.com \
--cc=sw0312.kim@samsung.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).