From: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
fabio.estevam-3arQi8VN3Tc@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org,
Gary Bisson
<gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
Subject: [PATCH 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board
Date: Tue, 15 Mar 2016 11:30:22 +0100 [thread overview]
Message-ID: <1458037826-19375-6-git-send-email-gary.bisson@boundarydevices.com> (raw)
In-Reply-To: <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
Based on i.MX6 Quad Plus with 4GB of RAM.
https://boundarydevices.com/product/nitrogen6max/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6qp-nitrogen6_max.dts | 55 ++++++++++++++++++++++++++++++
2 files changed, 56 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index fd67d8d..279ec61 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -356,6 +356,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
+ imx6qp-nitrogen6_max.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
new file mode 100644
index 0000000..2dee1d8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX Board";
+ compatible = "boundary,imx6qp-nitrogen6_max", "fsl,imx6qp";
+};
+
+&sata {
+ status = "okay";
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-03-15 10:30 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-15 10:30 [PATCH 0/9] imx: add latest Boundary Devices boards support Gary Bisson
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 10:30 ` [PATCH 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
2016-03-15 10:30 ` [PATCH 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
2016-03-15 10:30 ` [PATCH 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
2016-03-15 10:30 ` [PATCH 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
2016-03-15 10:30 ` Gary Bisson [this message]
2016-03-15 10:30 ` [PATCH 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
[not found] ` <1458037826-19375-7-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 10:53 ` Vladimir Zapolskiy
[not found] ` <56E7E98F.5030902-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2016-03-15 10:58 ` Gary Bisson
2016-03-15 10:30 ` [PATCH 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
2016-03-15 10:30 ` [PATCH 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-03-15 10:30 ` [PATCH 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
2016-03-15 14:04 ` [PATCH v2 0/9] imx: add latest Boundary Devices boards support Gary Bisson
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 14:04 ` [PATCH v2 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
[not found] ` <1458050668-26748-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 1:29 ` Shawn Guo
2016-04-02 16:08 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
[not found] ` <1458050668-26748-3-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 1:31 ` Shawn Guo
2016-04-02 16:10 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
2016-03-15 14:04 ` [PATCH v2 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
2016-03-15 14:04 ` [PATCH v2 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
2016-03-15 14:04 ` [PATCH v2 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
2016-03-15 14:04 ` [PATCH v2 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
2016-03-15 14:04 ` [PATCH v2 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-03-15 14:04 ` [PATCH v2 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
2016-04-02 16:25 ` [PATCH v3 0/9] imx: add latest Boundary Devices boards support Gary Bisson
[not found] ` <1459614351-16731-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 16:25 ` [PATCH v3 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
[not found] ` <1459614351-16731-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-06 9:06 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
2016-04-02 16:25 ` [PATCH v3 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
2016-04-02 16:25 ` [PATCH v3 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
[not found] ` <1459614351-16731-5-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-06 14:15 ` Shawn Guo
2016-04-07 10:07 ` Gary Bisson
2016-04-07 13:50 ` [PATCH v4] " Gary Bisson
[not found] ` <1460037057-23191-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-11 14:13 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
[not found] ` <1459614351-16731-6-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-06 14:25 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
[not found] ` <1459614351-16731-7-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-07 13:52 ` [PATCH v4] " Gary Bisson
[not found] ` <1460037168-23292-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-11 14:31 ` Shawn Guo
2016-04-11 21:01 ` [PATCH v5] " Gary Bisson
[not found] ` <1460408496-21164-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-12 0:47 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
[not found] ` <1459614351-16731-8-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-06 14:35 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-04-02 16:25 ` [PATCH v3 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458037826-19375-6-git-send-email-gary.bisson@boundarydevices.com \
--to=gary.bisson-q5rjgjkts06cy9shamctrueocmrvltnr@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).