Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	Kevin Hilman <khilman@kernel.org>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Inki Dae <inki.dae@samsung.com>,
	Javier Martinez Canillas <javier@osg.samsung.com>,
	Krzysztof Kozlowski <krzk@kernel.org>
Subject: [RFC PATCH 11/12] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
Date: Tue,  3 May 2016 19:52:28 +0200
Message-ID: <1462297949-13824-12-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1462297949-13824-1-git-send-email-krzk@kernel.org>

The exynos5.dtsi is used for common nodes shared between Exynos5250 and
Exynos542x. Since Exynos5410 is very similar to Exynos5420 it can
include the common file as well to remove duplication and make
everything more consistent.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5410-smdk5410.dts |   6 +-
 arch/arm/boot/dts/exynos5410.dtsi         | 103 ++++++++++--------------------
 2 files changed, 35 insertions(+), 74 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 0f6429e1b75c..777fcf2edd79 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -102,14 +102,14 @@
 	};
 };
 
-&uart0 {
+&serial_0 {
 	status = "okay";
 };
 
-&uart1 {
+&serial_1 {
 	status = "okay";
 };
 
-&uart2 {
+&serial_2 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 8de8c644f42e..c8f2e4881667 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -14,6 +14,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos5.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
 
@@ -26,9 +27,6 @@
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
 	};
 
 	cpus {
@@ -70,49 +68,6 @@
 		#size-cells = <1>;
 		ranges;
 
-		combiner: interrupt-controller@10440000 {
-			compatible = "samsung,exynos4210-combiner";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			samsung,combiner-nr = <32>;
-			reg = <0x10440000 0x1000>;
-			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg =	<0x10481000 0x1000>,
-				<0x10482000 0x1000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		sromc: memory-controller@12250000 {
-			compatible = "samsung,exynos4210-srom";
-			reg = <0x12250000 0x14>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x04000000 0x20000
-				  1 0 0x05000000 0x20000
-				  2 0 0x06000000 0x20000
-				  3 0 0x07000000 0x20000>;
-		};
-
 		pmu_system_controller: system-controller@10040000 {
 			compatible = "samsung,exynos5410-pmu", "syscon";
 			reg = <0x10040000 0x5000>;
@@ -236,34 +191,40 @@
 			reg = <0x03860000 0x1000>;
 			interrupts = <0 47 0>;
 		};
+	};
+};
 
-		uart0: serial@12C00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <0 51 0>;
-			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
 
-		uart1: serial@12C10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <0 52 0>;
-			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
+&serial_0 {
+	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+	clock-names = "uart", "clk_uart_baud0";
+};
 
-		uart2: serial@12C20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <0 53 0>;
-			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-	};
+&serial_1 {
+	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+	status = "disabled";
+};
+
+&sromc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x04000000 0x20000
+		  1 0 0x05000000 0x20000
+		  2 0 0x06000000 0x20000
+		  3 0 0x07000000 0x20000>;
 };
 
 #include "exynos5410-pinctrl.dtsi"
-- 
2.5.0

  parent reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-03 17:52 [RFC PATCH 00/12] ARM: dts: exynos: Reorganize before adding Odroid XU board Krzysztof Kozlowski
2016-05-03 17:52 ` [RFC PATCH 01/12] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs Krzysztof Kozlowski
2016-05-03 17:52 ` [RFC PATCH 02/12] dt-bindings: clock: Add PWM clock ID to Exynos5410 Krzysztof Kozlowski
2016-05-03 17:52 ` [RFC PATCH 03/12] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes Krzysztof Kozlowski
2016-05-03 17:52 ` [RFC PATCH 04/12] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels Krzysztof Kozlowski
2016-05-03 17:52 ` [RFC PATCH 05/12] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card Krzysztof Kozlowski
2016-05-07  4:53   ` Alim Akhtar
2016-05-07  9:49     ` Krzysztof Kozlowski
2016-05-03 17:52 ` [RFC PATCH 06/12] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI Krzysztof Kozlowski
2016-05-03 17:52 ` [RFC PATCH 07/12] ARM: dts: exynos: Move common nodes to exynos5.dtsi Krzysztof Kozlowski
2016-05-03 17:52 ` [RFC PATCH 08/12] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi Krzysztof Kozlowski
2016-05-03 17:52 ` [RFC PATCH 09/12] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow Krzysztof Kozlowski
2016-05-03 17:52 ` [RFC PATCH 10/12] ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc Krzysztof Kozlowski
2016-05-03 17:52 ` Krzysztof Kozlowski [this message]
2016-05-03 17:52 ` [RFC PATCH 12/12] ARM: dts: exynos: Enable UART3 on Exynos5410 Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462297949-13824-12-git-send-email-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=arnd@arndb.de \
    --cc=b.zolnierkie@samsung.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=inki.dae@samsung.com \
    --cc=javier@osg.samsung.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene@kernel.org \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=olof@lixom.net \
    --cc=s.nawrocki@samsung.com \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git
	git clone --mirror https://lore.kernel.org/linux-devicetree/1 linux-devicetree/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git