From: Wei Ni <wni@nvidia.com>
To: edubezval@gmail.com, thierry.reding@gmail.com,
robh+dt@kernel.org, rui.zhang@intel.com
Cc: MLongnecker@nvidia.com, swarren@wwwdotorg.org,
mikko.perttunen@kapsi.fi, linux-tegra@vger.kernel.org,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Wei Ni <wni@nvidia.com>
Subject: [PATCH v4 08/11] arm64: tegra: set hot trips for Tegra132
Date: Mon, 9 May 2016 14:54:01 +0800 [thread overview]
Message-ID: <1462776844-2152-9-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1462776844-2152-1-git-send-email-wni@nvidia.com>
Enable throttle function for SOC_THERM.
Set "hot" trips for cpu and gpu thermal zones, which
can trigger the SOC_THERM hardware throttle.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra132.dtsi | 41 +++++++++++++++++++++++++-------
1 file changed, 32 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index a3889e930010..63ec3a9c4e04 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -729,7 +729,9 @@
soctherm: thermal-sensor@700e2000 {
compatible = "nvidia,tegra132-soctherm";
- reg = <0x0 0x700e2000 0x0 0x600>;
+ reg = <0x0 0x700e2000 0x0 0x600 /* 0: SOC_THERM reg_base */
+ 0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */
+ reg-names = "soctherm-reg", "ccroc-reg";
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -737,6 +739,15 @@
resets = <&tegra_car 78>;
reset-names = "soctherm";
#thermal-sensor-cells = <1>;
+
+ throttle-cfgs {
+ throttle_heavy: nvidia,heavy {
+ nvidia,priority = <100>;
+ nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+ #cooling-cells = <2>;
+ };
+ };
};
thermal-zones {
@@ -753,13 +764,19 @@
hysteresis = <1000>;
type = "critical";
};
+
+ cpu_throttle_trip: throttle-trip {
+ temperature = <102000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
};
cooling-maps {
- /*
- * There are currently no cooling maps,
- * because there are no cooling devices.
- */
+ map0 {
+ trip = <&cpu_throttle_trip>;
+ cooling-device = <&throttle_heavy 1 1>;
+ };
};
};
mem {
@@ -797,13 +814,19 @@
hysteresis = <1000>;
type = "critical";
};
+
+ gpu_throttle_trip: throttle-trip {
+ temperature = <99000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
};
cooling-maps {
- /*
- * There are currently no cooling maps,
- * because there are no cooling devices.
- */
+ map0 {
+ trip = <&gpu_throttle_trip>;
+ cooling-device = <&throttle_heavy 1 1>;
+ };
};
};
pllx {
--
1.9.1
next prev parent reply other threads:[~2016-05-09 6:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-09 6:53 [PATCH v4 00/11] Add HW throttle for Tegra soctherm Wei Ni
2016-05-09 6:53 ` [PATCH v4 01/11] of: Add bindings of hw " Wei Ni
2016-05-09 20:15 ` Rob Herring
2016-05-10 9:32 ` Wei Ni
2016-05-09 6:53 ` [PATCH v4 03/11] thermal: tegra: add hw-throttle for Tegra132 Wei Ni
2016-05-09 6:53 ` [PATCH v4 06/11] arm64: tegra: use tegra132-soctherm " Wei Ni
2016-05-09 6:54 ` [PATCH v4 07/11] arm64: tegra: set critical trips " Wei Ni
2016-05-09 6:54 ` Wei Ni [this message]
2016-05-09 6:54 ` [PATCH v4 09/11] arm64: tegra: add soctherm node for Tegra210 Wei Ni
2016-05-09 6:54 ` [PATCH v4 10/11] arm64: tegra: set critical trips " Wei Ni
[not found] ` <1462776844-2152-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-05-09 6:53 ` [PATCH v4 02/11] thermal: tegra: add hw-throttle function Wei Ni
2016-05-09 6:53 ` [PATCH v4 04/11] arm: tegra: set critical trips for Tegra124 Wei Ni
2016-05-09 6:53 ` [PATCH v4 05/11] arm: tegra: set hot " Wei Ni
2016-05-09 6:54 ` [PATCH v4 11/11] arm64: tegra: set hot trips for Tegra210 Wei Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462776844-2152-9-git-send-email-wni@nvidia.com \
--to=wni@nvidia.com \
--cc=MLongnecker@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mikko.perttunen@kapsi.fi \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).