From mboxrd@z Thu Jan 1 00:00:00 1970 From: "jeffrey.lin" Subject: [PATCH] driver: input :touchscreen : add Raydium I2C touch driver Date: Wed, 11 May 2016 21:51:30 +0800 Message-ID: <1462974690-316-1-git-send-email-jeffrey.lin@rad-ic.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: dmitry.torokhov@gmail.com, rydberg@euromail.se, grant.likely@linaro.org, robh+dt@kernel.org, jeesw@melfas.com, bleung@chromium.org Cc: jeffrey.lin@rad-ic.com, roger.yang@rad-ic.com, KP.li@rad-ic.com, albert.shieh@rad-ic.com, linux-kernel@vger.kernel.org, linux-input@vger.kernel.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org Raydium I2C touch driver. Signed-off-by: jeffrey.lin --- drivers/input/touchscreen/Kconfig | 12 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/raydium_i2c_ts.c | 1208 ++++++++++++++++++++++++++++ 3 files changed, 1221 insertions(+) create mode 100644 drivers/input/touchscreen/raydium_i2c_ts.c diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 3f3f6ee..df0e2ed 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -915,6 +915,18 @@ config TOUCHSCREEN_PCAP To compile this driver as a module, choose M here: the module will be called pcap_ts. +config TOUCHSCREEN_RM_TS + tristate "Raydium I2C Touchscreen" + depends on I2C + help + Say Y here if you have Raydium series I2C touchscreen, + such as RM32380,connected to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called raydium_i2c_ts. + config TOUCHSCREEN_ST1232 tristate "Sitronix ST1232 touchscreen controllers" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 4941f2d..99e08cf 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o +obj-$(CONFIG_TOUCHSCREEN_RM_TS) += raydium_i2c_ts.o obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c new file mode 100644 index 0000000..6491920 --- /dev/null +++ b/drivers/input/touchscreen/raydium_i2c_ts.c @@ -0,0 +1,1208 @@ +/* + * Raydium touchscreen I2C driver. + * + * Copyright (C) 2012-2014, Raydium Semiconductor Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Raydium reserves the right to make changes without further notice + * to the materials described herein. Raydium does not assume any + * liability arising out of the application described herein. + * + * Contact Raydium Semiconductor Corporation at www.rad-ic.com + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Device, Driver information */ +#define DEVICE_NAME "raydium_i2c" + +/* Slave I2C mode*/ +#define RM_BOOT_BLDR 0x02 +#define RM_BOOT_MAIN 0x03 + +/*I2C bl command */ +#define CMD_BOOT_PAGE_WRT 0x0B /*send bl page write*/ +#define CMD_BOOT_WRT 0x11 /*send bl write*/ +#define CMD_BOOT_ACK 0x22 /*send ack*/ +#define CMD_BOOT_CHK 0x33 /*send data check*/ +#define CMD_BOOT_READ 0x44 /*send wait bl data ready*/ +#define BOOT_RDY 0xFF /*bl data ready*/ +/*I2C main command*/ +#define CMD_QUERY_BANK 0x2B +#define CMD_DATA_BANK 0x4D +#define CMD_ENTER_SLEEP 0x4E +#define CMD_BANK_SWITCH 0xAA + +/* Touch relative info */ +#define MAX_RETRIES 3 +#define MAX_TOUCH_NUM 10 +#define MAX_PKG_SIZE 128 +#define MAX_RD_PKG_LEN 48 +#define BOOT_DELAY_MS 100 + +/*Bootloader relative info */ +#define CMD_BOOT_HEADER_LEN 3 /*bl flash wrt cmd size*/ +#define RAYDIUM_TRANS_BUFSIZE 32 /*bl wrt pkg size*/ +#define MAX_BOOT_WRT_LEN (RAYDIUM_TRANS_BUFSIZE + CMD_BOOT_HEADER_LEN) +#define MAX_FW_UPDATE_RETRIES 30 + +enum raydium_bl_cmd { + HEADER = 0, + PAGE_STR, + PKG_IDX, + DATA_STR, +}; + +enum raydium_bl_ack { + ACK_NULL = 0, + WAIT_READY, + PATH_READY, +}; + +#define RAYDIUM_PAGE_SIZE 128 +#define RAYDIUM_POWERON_DELAY_USEC 500 +#define RAYDIUM_RESET_DELAY_MSEC 50 + +#define ADDR_INDEX 0x03 +#define DATA_INDEX 0x04 + +#define HEADER_SIZE 4 + +enum raydium_boot_mode { + RAYDIUM_TS_MAIN = 0, + RAYDIUM_TS_BLDR, +}; + +enum raydium_abs_idx { + POS_STATE = 0,/*1:touch, 0:no touch*/ + POS_X, + POS_Y = 3, + POS_PRESSURE, + WIDTH_X, + WIDTH_Y, +}; + +struct raydium_info { + u32 hw_ver; /*device ver, __le32*/ + u8 main_ver; + u8 sub_ver; + u16 ft_ver; /*test ver, __le16*/ + u8 x_num; + u8 y_num; + u16 x_max; /*disp reso, __le16*/ + u16 y_max; /*disp reso, __le16*/ + u8 x_res; /* units/mm */ + u8 y_res; /* units/mm */ +}; + +struct raydium_object { + u32 data_bank_addr; + u8 pkg_size; + u8 tp_info_size; +}; + +/* struct raydium_data - represents state of Raydium touchscreen device */ +struct raydium_data { + struct i2c_client *client; + struct input_dev *input; + + struct regulator *avdd; + struct regulator *vccio; + struct gpio_desc *reset_gpio; + + u32 query_bank_info; + + struct raydium_info info; + struct raydium_object obj; + enum raydium_boot_mode boot_mode; + + struct mutex sysfs_mutex; + struct completion cmd_done; + + bool wake_irq_enabled; +}; + +static int raydium_i2c_send(struct i2c_client *client, + u8 addr, u8 *data, size_t len) +{ + u8 buf[MAX_PKG_SIZE]; + int tries = 0; + + buf[0] = addr; + memcpy(&buf[1], data, len); + + do { + if (i2c_master_send(client, buf, len + 1) == (len + 1)) + return 0; + msleep(20); + } while (++tries < MAX_RETRIES); + + dev_err(&client->dev, "%s: i2c send failed\n", __func__); + + return -EIO; +} + +static int raydium_i2c_read(struct i2c_client *client, + u8 addr, size_t len, void *data) +{ + struct i2c_msg xfer[2]; + int ret; + + /* Write register */ + xfer[0].addr = client->addr; + xfer[0].flags = 0; + xfer[0].len = 1; + xfer[0].buf = &addr; + + /* Read data */ + xfer[1].addr = client->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = len; + xfer[1].buf = data; + + ret = i2c_transfer(client->adapter, xfer, ARRAY_SIZE(xfer)); + if (ret < 0) + return ret; + + if (ret != ARRAY_SIZE(xfer)) + return -EIO; + + return 0; +} + +static int raydium_i2c_read_message(struct i2c_client *client, + u32 addr, size_t len, void *data) +{ + u8 buf[HEADER_SIZE]; + u8 read_cnt, idx_i; + int error; + size_t pkg_size; + + if (len % MAX_RD_PKG_LEN) + read_cnt = len / MAX_RD_PKG_LEN + 1; + else + read_cnt = len / MAX_RD_PKG_LEN; + + for (idx_i = 0; idx_i < read_cnt; idx_i++) { + pkg_size = (len > MAX_RD_PKG_LEN) ? MAX_RD_PKG_LEN : len; + + len -= MAX_RD_PKG_LEN; + + put_unaligned_be32(addr, buf); + + /*set data bank*/ + error = raydium_i2c_send(client, CMD_BANK_SWITCH, + (u8 *)buf, HEADER_SIZE); + /*read potints data*/ + if (!error) + error = raydium_i2c_read(client, buf[ADDR_INDEX], + pkg_size, + data + idx_i*MAX_RD_PKG_LEN); + + addr += MAX_RD_PKG_LEN; + } + + return error; +} + +static int raydium_i2c_send_message(struct i2c_client *client, + size_t len, void *data) +{ + int error; + __le32 cmd; + + cmd = get_unaligned_le32(data); + + /*set data bank*/ + error = raydium_i2c_send(client, CMD_BANK_SWITCH, (u8 *)&cmd, + HEADER_SIZE); + + /*send message*/ + if (!error) + error = raydium_i2c_send(client, ((u8 *)data)[ADDR_INDEX], + data + DATA_INDEX, len); + + return error; +} + +static int raydium_i2c_sw_reset(struct i2c_client *client) +{ + static const u8 soft_rst_cmd[] = {0x40, 0x00, 0x00, 0x04, 0x01}; + int error; + + error = raydium_i2c_send_message(client, ARRAY_SIZE(soft_rst_cmd), + (void *)soft_rst_cmd); + if (error) { + dev_err(&client->dev, "software reset failed: %d\n", error); + return error; + } + + msleep(RAYDIUM_RESET_DELAY_MSEC); + + return 0; +} + +static int raydium_i2c_query_ts_info(struct raydium_data *ts) +{ + struct i2c_client *client = ts->client; + int error, retry_cnt; + + for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { + error = raydium_i2c_read(client, CMD_DATA_BANK, + sizeof(ts->obj), (void *)&ts->obj); + ts->obj.data_bank_addr = + get_unaligned_le32(&ts->obj.data_bank_addr); + + if (!error) { + error = raydium_i2c_read(client, CMD_QUERY_BANK, + sizeof(ts->query_bank_info), + (void *)&ts->query_bank_info); + if (!error) { + error = raydium_i2c_read_message(client, + ts->query_bank_info, sizeof(ts->info), + (void *)&ts->info); + + ts->info.hw_ver = + get_unaligned_le32(&ts->info.hw_ver); + ts->info.ft_ver = + get_unaligned_le16(&ts->info.ft_ver); + ts->info.x_max = + get_unaligned_le16(&ts->info.x_max); + ts->info.y_max = + get_unaligned_le16(&ts->info.y_max); + return 0; + } + } + } + dev_err(&client->dev, "Get touch data failed: %d\n", error); + + return -EINVAL; +} + +static int raydium_i2c_fastboot(struct i2c_client *client) +{ + static const u8 boot_cmd[] = { 0x50, 0x00, 0x06, 0x20 }; + u8 buf[HEADER_SIZE]; + int error; + + error = raydium_i2c_read_message(client, + get_unaligned_be32(boot_cmd), + sizeof(boot_cmd), buf); + + if (!error) { + if (buf[0] == RM_BOOT_BLDR) { + dev_dbg(&client->dev, "boot in fastboot mode\n"); + return -EINVAL; + } + dev_dbg(&client->dev, "boot success -- 0x%x\n", client->addr); + return 0; + } + + dev_err(&client->dev, "boot failed: %d\n", error); + + return error; +} + +static int raydium_i2c_check_fw_status(struct raydium_data *ts) +{ + struct i2c_client *client = ts->client; + static const u8 bl_area[] = {0x62, 0x6f, 0x6f, 0x74}; + static const u8 main_area[] = {0x66, 0x69, 0x72, 0x6d}; + u8 buf[HEADER_SIZE]; + int error; + + error = raydium_i2c_read(client, CMD_BOOT_READ, HEADER_SIZE, + (void *)buf); + if (!error) { + if (buf[0] == bl_area[0]) + ts->boot_mode = RAYDIUM_TS_BLDR; + else if (buf[0] == main_area[0]) + ts->boot_mode = RAYDIUM_TS_MAIN; + return 0; + } + + return error; +} + +static int raydium_i2c_initialize(struct raydium_data *ts) +{ + struct i2c_client *client = ts->client; + int error, retry_cnt; + + for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { + error = raydium_i2c_fastboot(client); + if (error) { + /* Continue initializing if it's the last try */ + if (retry_cnt < MAX_RETRIES - 1) + continue; + } + /* Wait for Hello packet */ + msleep(BOOT_DELAY_MS); + + error = raydium_i2c_check_fw_status(ts); + if (ts->boot_mode == RAYDIUM_TS_BLDR || + ts->boot_mode == RAYDIUM_TS_MAIN) + break; + else if (error) { + dev_err(&client->dev, + "failed to read 'hello' packet: %d\n", error); + } + } + + if (error) + ts->boot_mode = RAYDIUM_TS_BLDR; + + if (ts->boot_mode == RAYDIUM_TS_BLDR) { + ts->info.hw_ver = 0xffffffff; + ts->info.main_ver = 0xff; + ts->info.sub_ver = 0xff; + } else { + raydium_i2c_query_ts_info(ts); + } + + return error; +} + +static int raydium_i2c_bl_chk_state(struct i2c_client *client, + enum raydium_bl_ack state) +{ + static const u8 ack_ok[] = { 0xFF, 0x39, 0x30, 0x30, 0x54 }; + u8 rbuf[5]; + u8 retry; + int error; + + if (state == ACK_NULL) + return 0; + + for (retry = 0; retry < MAX_FW_UPDATE_RETRIES; retry++) { + if (state == WAIT_READY) { + error = raydium_i2c_read(client, CMD_BOOT_CHK, + 1, &rbuf[0]); + if (!error) { + if (rbuf[0] == BOOT_RDY) + return 0; + } + } else if (state == PATH_READY) { + error = raydium_i2c_read(client, CMD_BOOT_CHK, + sizeof(ack_ok), &rbuf[0]); + if (!error) { + if (!memcmp(rbuf, ack_ok, sizeof(ack_ok))) + return 0; + } + } else + return -EINVAL; + msleep(20); + } + + return -EINVAL; +} + +static int raydium_i2c_wrt_object(struct i2c_client *client, + u8 *data, size_t len, enum raydium_bl_ack state) +{ + int error = 0; + + error = raydium_i2c_send(client, CMD_BOOT_WRT, data, len); + if (error) { + dev_err(&client->dev, "WRT obj command failed: %d\n", + error); + return error; + } + + error = raydium_i2c_send(client, CMD_BOOT_ACK, (u8 *)NULL, 0); + if (error) { + dev_err(&client->dev, "Ack obj command failed: %d\n", error); + return error; + } + + error = raydium_i2c_bl_chk_state(client, state); + if (error) { + dev_err(&client->dev, "boot trigger state failed: %d\n", error); + return error; + } + + return 0; +} + +static bool raydium_i2c_boot_trigger(struct i2c_client *client) +{ + int error; + u8 u8_idx; + static const u8 cmd[7][6] = { + {0x08, 0x0C, 0x09, 0x00, 0x50, 0xD7}, + {0x08, 0x04, 0x09, 0x00, 0x50, 0xA5}, + {0x08, 0x04, 0x09, 0x00, 0x50, 0x00}, + {0x08, 0x04, 0x09, 0x00, 0x50, 0xA5}, + {0x08, 0x0C, 0x09, 0x00, 0x50, 0x00}, + {0x06, 0x01, 0x00, 0x00, 0x00, 0x00}, + {0x02, 0xA2, 0x00, 0x00, 0x00, 0x00}, + }; + + /*sequtial cmd*/ + for (u8_idx = 0 ; u8_idx < 7 ; u8_idx++) { + error = raydium_i2c_wrt_object(client, (u8 *)cmd[u8_idx], + sizeof(cmd[u8_idx]), WAIT_READY); + if (error) { + dev_err(&client->dev, "send boot trigger 1st_cmd failed: %d\n", + error); + return error; + } + } + return 0; +} + +static bool raydium_i2c_fw_trigger(struct i2c_client *client) +{ + int error; + u8 u8_idx; + static const u8 cmd[5][11] = { + {0, 0x09, 0x71, 0x0C, 0x09, 0x00, 0x50, 0xD7, 0, 0, 0}, + {0, 0x09, 0x71, 0x04, 0x09, 0x00, 0x50, 0xA5, 0, 0, 0}, + {0, 0x09, 0x71, 0x04, 0x09, 0x00, 0x50, 0x00, 0, 0, 0}, + {0, 0x09, 0x71, 0x04, 0x09, 0x00, 0x50, 0xA5, 0, 0, 0}, + {0, 0x09, 0x71, 0x0C, 0x09, 0x00, 0x50, 0x00, 0, 0, 0}, + }; + + /*sequtial cmd*/ + for (u8_idx = 0 ; u8_idx < 5 ; u8_idx++) { + error = raydium_i2c_wrt_object(client, (u8 *)cmd[u8_idx], + sizeof(cmd[u8_idx]), ACK_NULL); + if (error) { + dev_err(&client->dev, "send fw trigger 1st_cmd failed: %d\n", + error); + return error; + } + } + return 0; +} + +static int raydium_i2c_check_path(struct i2c_client *client) +{ + static const u8 cmd[] = {0x09, 0x00, 0x09, 0x00, 0x50, 0x10, 0x00}; + int error; + + error = raydium_i2c_wrt_object(client, (u8 *)cmd, sizeof(cmd), + PATH_READY); + if (error) { + dev_err(&client->dev, "send chk path cmd fail: %d\n", error); + return error; + } + + return error; +} + +static int raydium_i2c_enter_bl(struct i2c_client *client) +{ + static const u8 cal_cmd[] = {0x00, 0x01, 0x52}; + int error; + + error = raydium_i2c_wrt_object(client, (u8 *)cal_cmd, + sizeof(cal_cmd), ACK_NULL); + if (error) { + dev_err(&client->dev, "send jump loader cmd fail: %d\n", error); + return error; + } + msleep(BOOT_DELAY_MS); + return 0; +} + +static int raydium_i2c_leave_bl(struct i2c_client *client) +{ + static const u8 leave_cmd[] = {0x05, 0x00}; + int error; + + error = raydium_i2c_wrt_object(client, (u8 *)leave_cmd, + sizeof(leave_cmd), ACK_NULL); + if (error) { + dev_err(&client->dev, "send leave bl cmd fail: %d\n", error); + return error; + } + msleep(BOOT_DELAY_MS); + return 0; +} + +static int raydium_i2c_write_checksum(struct i2c_client *client, + size_t length, u16 checksum) +{ + u8 checksum_cmd[] = {0x00, 0x05, 0x6D, 0x00, 0x00, 0x00, 0x00}; + int error = 0; + + checksum_cmd[3] = (u8)(length & 0xFF); + checksum_cmd[4] = (u8)((length & 0xFF00) >> 8); + checksum_cmd[5] = (u8)(checksum & 0xFF); + checksum_cmd[6] = (u8)((checksum & 0xFF00) >> 8); + + error = raydium_i2c_wrt_object(client, (u8 *)checksum_cmd, + sizeof(checksum_cmd), ACK_NULL); + if (error) { + dev_err(&client->dev, "send wrt checksum cmd fail: %d\n", + error); + return error; + } + + return 0; +} + +static int raydium_i2c_disable_watch_dog(struct i2c_client *client) +{ + static const u8 cmd[] = {0x0A, 0xAA}; + int error = 0; + + error = raydium_i2c_wrt_object(client, (u8 *)cmd, sizeof(cmd), + WAIT_READY); + if (error) { + dev_err(&client->dev, "send disable watchdog cmd fail: %d\n", + error); + return error; + } + + return 0; +} + +static int raydium_i2c_fw_write_page(struct i2c_client *client, + u8 *page, size_t len) +{ + int error; + u8 buf[MAX_BOOT_WRT_LEN]; + u8 u8_idx, div_cnt; + + len -= CMD_BOOT_HEADER_LEN; + + div_cnt = len % RAYDIUM_TRANS_BUFSIZE ? + len / RAYDIUM_TRANS_BUFSIZE + 1:len / RAYDIUM_TRANS_BUFSIZE; + + for (u8_idx = 0 ; u8_idx < div_cnt ; u8_idx++) { + buf[HEADER] = page[0]; + buf[PAGE_STR] = page[1]; + buf[PKG_IDX] = u8_idx + 1; + + memcpy(&buf[DATA_STR], page + DATA_STR + + u8_idx*RAYDIUM_TRANS_BUFSIZE, + RAYDIUM_TRANS_BUFSIZE); + + error = raydium_i2c_wrt_object(client, (u8 *)buf, sizeof(buf), + WAIT_READY); + if (error) { + dev_err(&client->dev, "send page wrt cmd failed: %d\n", + error); + return error; + } + msleep(20); + } + + return error; +} + +static int raydium_i2c_do_update_firmware(struct raydium_data *ts, + const struct firmware *fw) +{ + struct i2c_client *client = ts->client; + u8 u8_idx; + u16 fw_checksum; + u8 buf[RAYDIUM_PAGE_SIZE + CMD_BOOT_HEADER_LEN]; + int page, n_fw_pages; + int error, fw_idx; + + if (fw->size == 0) { + dev_err(&client->dev, "Invalid firmware length\n"); + return -EINVAL; + } + + if (fw->size % RAYDIUM_PAGE_SIZE) + n_fw_pages = fw->size/RAYDIUM_PAGE_SIZE + 1; + else + n_fw_pages = fw->size/RAYDIUM_PAGE_SIZE; + + error = raydium_i2c_check_fw_status(ts); + if (error) { + dev_err(&client->dev, "Unable to access IC %d\n", error); + return error; + } + + if (ts->boot_mode == RAYDIUM_TS_MAIN) { + for (u8_idx = 0; u8_idx < MAX_RETRIES; u8_idx++) { + error = raydium_i2c_enter_bl(client); + if (!error) { + error = raydium_i2c_check_fw_status(ts); + if (error) { + dev_err(&client->dev, "Unable to access IC %d\n", + error); + return error; + } + if (ts->boot_mode == RAYDIUM_TS_BLDR) + break; + } + } + if (ts->boot_mode == RAYDIUM_TS_MAIN) { + dev_err(&client->dev, "Fail jump to boot loader %d\n", + error); + return -EIO; + } + } + + error = raydium_i2c_disable_watch_dog(client); + if (error) { + dev_err(&client->dev, "send disable watchdog cmd fail, %d\n", + error); + return error; + } + + error = raydium_i2c_check_path(client); + if (error) { + dev_err(&client->dev, "send chk path fail, %d\n", error); + return error; + } + + error = raydium_i2c_boot_trigger(client); + if (error) { + dev_err(&client->dev, "send boot trigger fail, %d\n", error); + return error; + } + + msleep(BOOT_DELAY_MS); + + fw_checksum = 0; + fw_idx = 0; + for (page = 0 ; page < n_fw_pages ; page++) { + memset(buf, 0xFF, sizeof(buf)); + buf[HEADER] = 0x0B; + if (page == 0) + buf[PAGE_STR] = 0x00; + + for (u8_idx = 0; u8_idx < RAYDIUM_PAGE_SIZE; u8_idx++) { + if (fw_idx < fw->size) { + buf[DATA_STR + u8_idx] = + fw->data[page*RAYDIUM_PAGE_SIZE + + u8_idx]; + fw_checksum += buf[3 + u8_idx]; + fw_idx++; + } + } + + raydium_i2c_fw_write_page(client, (u8 *)buf, sizeof(buf)); + msleep(20); + } + + error = raydium_i2c_leave_bl(client); + if (error) { + dev_err(&client->dev, "leave boot loader fail: %d\n", error); + return error; + } + dev_err(&client->dev, "leave boot loader success\n"); + + error = raydium_i2c_check_fw_status(ts); + if (error) { + dev_err(&client->dev, "Unable to access IC %d\n", error); + return error; + } + + if (ts->boot_mode == RAYDIUM_TS_MAIN) { + + error = raydium_i2c_fw_trigger(client); + if (error) { + dev_err(&client->dev, "send fw trigger fail, %d\n", + error); + return error; + } + + error = raydium_i2c_write_checksum(client, fw->size, + fw_checksum); + if (error) { + dev_err(&client->dev, "write checksum fail %d\n", + error); + return error; + } + } else { + dev_err(&client->dev, "switch to main_fw fail %d\n", error); + return -EINVAL; + } + + return 0; +} + +static int raydium_i2c_fw_update(struct raydium_data *ts) +{ + struct i2c_client *client = ts->client; + const struct firmware *fw = NULL; + const char *fw_file = "raydium.fw"; + int error; + + error = request_firmware(&fw, fw_file, &client->dev); + if (error) { + dev_err(&client->dev, "Unable to open firmware %s\n", fw_file); + return error; + } + /*disable irq*/ + disable_irq(client->irq); + + error = raydium_i2c_do_update_firmware(ts, fw); + if (error) { + dev_err(&client->dev, "firmware update failed: %d\n", error); + ts->boot_mode = RAYDIUM_TS_BLDR; + goto out_enable_irq; + } + + error = raydium_i2c_initialize(ts); + if (error) { + dev_err(&client->dev, + "failed to initialize device after firmware update: %d\n", + error); + ts->boot_mode = RAYDIUM_TS_BLDR; + goto out_enable_irq; + } + + ts->boot_mode = RAYDIUM_TS_MAIN; + +out_enable_irq: + enable_irq(client->irq); + msleep(100); + + return error; +} + +static void raydium_mt_event(struct raydium_data *ts) +{ + u8 data[MAX_PKG_SIZE]; + int error, i; + int x, y, f_state, pressure, wx, wy; + + error = raydium_i2c_read_message(ts->client, ts->obj.data_bank_addr, + ts->obj.pkg_size, (void *)data); + + if (error < 0) { + dev_err(&ts->client->dev, "%s: failed to read data: %d\n", + __func__, error); + return; + } + + for (i = 0; i < MAX_TOUCH_NUM; i++) { + f_state = (data + i * ts->obj.tp_info_size)[POS_STATE]; + pressure = (data + i * ts->obj.tp_info_size)[POS_PRESSURE]; + wx = (data + i * ts->obj.tp_info_size)[WIDTH_X]; + wy = (data + i * ts->obj.tp_info_size)[WIDTH_Y]; + + input_mt_slot(ts->input, i); + input_mt_report_slot_state(ts->input, + MT_TOOL_FINGER, f_state != 0); + + if (!f_state) + continue; + x = get_unaligned_le16(&data[i * ts->obj.tp_info_size + POS_X]); + y = get_unaligned_le16(&data[i * ts->obj.tp_info_size + POS_Y]); + + input_report_abs(ts->input, ABS_MT_POSITION_X, x); + input_report_abs(ts->input, ABS_MT_POSITION_Y, y); + input_report_abs(ts->input, ABS_MT_PRESSURE, pressure); + input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, + max(wx, wy)); + input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, + min(wx, wy)); + } + + input_mt_sync_frame(ts->input); + input_sync(ts->input); +} + +static irqreturn_t raydium_i2c_irq(int irq, void *_dev) +{ + struct raydium_data *ts = _dev; + + if (ts->boot_mode != RAYDIUM_TS_BLDR) + raydium_mt_event(ts); + + return IRQ_HANDLED; +} + +static ssize_t raydium_calibrate(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct raydium_data *ts = dev_get_drvdata(dev); + struct i2c_client *client = ts->client; + + static const u8 cal_cmd[] = {0x00, 0x01, 0x9E}; + int error = 0; + + error = raydium_i2c_wrt_object(client, (u8 *)cal_cmd, + sizeof(cal_cmd), WAIT_READY); + if (error) { + dev_err(&client->dev, "send chk path cmd fail: %d\n", error); + return error; + } + + return error; +} + +static ssize_t write_update_fw(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct raydium_data *ts = dev_get_drvdata(dev); + int error; + + error = mutex_lock_interruptible(&ts->sysfs_mutex); + if (error) + return error; + + error = raydium_i2c_fw_update(ts); + dev_dbg(dev, "firmware update result: %d\n", error); + + mutex_unlock(&ts->sysfs_mutex); + return error ?: count; +} + +static ssize_t raydium_bootmode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct raydium_data *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", ts->boot_mode == RAYDIUM_TS_MAIN ? + "Normal" : "Recovery"); +} + +static ssize_t raydium_fw_ver_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct raydium_data *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%d.%d\n", ts->info.main_ver, ts->info.sub_ver); +} + +static ssize_t raydium_hw_ver_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct raydium_data *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%04x\n", ts->info.hw_ver); +} + +static DEVICE_ATTR(fw_version, S_IRUGO, raydium_fw_ver_show, NULL); +static DEVICE_ATTR(hw_version, S_IRUGO, raydium_hw_ver_show, NULL); +static DEVICE_ATTR(boot_mode, S_IRUGO, raydium_bootmode_show, NULL); +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, write_update_fw); +static DEVICE_ATTR(calibrate, S_IWUSR, NULL, raydium_calibrate); + +static struct attribute *raydium_attributes[] = { + &dev_attr_update_fw.attr, + &dev_attr_boot_mode.attr, + &dev_attr_fw_version.attr, + &dev_attr_hw_version.attr, + &dev_attr_calibrate.attr, + NULL +}; + +static struct attribute_group raydium_attribute_group = { + .attrs = raydium_attributes, +}; + +static void raydium_i2c_remove_sysfs_group(void *_data) +{ + struct raydium_data *ts = _data; + + sysfs_remove_group(&ts->client->dev.kobj, &raydium_attribute_group); +} + +static int raydium_i2c_power_on(struct raydium_data *ts) +{ + int error; + + if (IS_ERR_OR_NULL(ts->reset_gpio)) + return 0; + + gpiod_set_value_cansleep(ts->reset_gpio, 1); + + error = regulator_enable(ts->avdd); + if (error) { + dev_err(&ts->client->dev, + "failed to enable avdd regulator: %d\n", error); + goto release_reset_gpio; + } + + error = regulator_enable(ts->vccio); + if (error) { + regulator_disable(ts->avdd); + dev_err(&ts->client->dev, + "failed to enable vccio regulator: %d\n", error); + goto release_reset_gpio; + } + + udelay(RAYDIUM_POWERON_DELAY_USEC); + +release_reset_gpio: + gpiod_set_value_cansleep(ts->reset_gpio, 0); + + if (error) + return error; + + msleep(RAYDIUM_RESET_DELAY_MSEC); + + return 0; +} + +static void raydium_i2c_power_off(void *_data) +{ + struct raydium_data *ts = _data; + + if (!IS_ERR_OR_NULL(ts->reset_gpio)) { + gpiod_set_value_cansleep(ts->reset_gpio, 1); + regulator_disable(ts->vccio); + regulator_disable(ts->avdd); + } +} + +static int raydium_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + union i2c_smbus_data dummy; + struct raydium_data *ts; + int error; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, + "%s: i2c check functionality error\n", DEVICE_NAME); + return -ENXIO; + } + + ts = devm_kzalloc(&client->dev, sizeof(struct raydium_data), + GFP_KERNEL); + if (!ts) + return -ENOMEM; + + mutex_init(&ts->sysfs_mutex); + init_completion(&ts->cmd_done); + + ts->client = client; + i2c_set_clientdata(client, ts); + + ts->avdd = devm_regulator_get(&client->dev, "avdd"); + if (IS_ERR(ts->avdd)) { + error = PTR_ERR(ts->avdd); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "Failed to get 'avdd' regulator: %d\n", error); + return error; + } + + ts->vccio = devm_regulator_get(&client->dev, "vccio"); + if (IS_ERR(ts->vccio)) { + error = PTR_ERR(ts->vccio); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "Failed to get 'vccio' regulator: %d\n", error); + return error; + } + + ts->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(ts->reset_gpio)) { + error = PTR_ERR(ts->reset_gpio); + if (error != -EPROBE_DEFER) { + dev_err(&client->dev, + "failed to get reset gpio: %d\n", error); + return error; + } + } + + error = raydium_i2c_power_on(ts); + if (error) + return error; + + error = devm_add_action(&client->dev, raydium_i2c_power_off, ts); + if (error) { + dev_err(&client->dev, + "failed to install power off action: %d\n", error); + raydium_i2c_power_off(ts); + return error; + } + + /* Make sure there is something at this address */ + if (i2c_smbus_xfer(client->adapter, client->addr, 0, + I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) { + dev_err(&client->dev, "nothing at this address\n"); + return -ENXIO; + } + + error = raydium_i2c_initialize(ts); + if (error) { + dev_err(&client->dev, "failed to initialize: %d\n", error); + return error; + } + + ts->input = devm_input_allocate_device(&client->dev); + if (!ts->input) { + dev_err(&client->dev, "Failed to allocate input device\n"); + return -ENOMEM; + } + + ts->input->name = "Raydium Touchscreen"; + ts->input->id.bustype = BUS_I2C; + + /* Multitouch input params setup */ + input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, + ts->info.x_max, 0, 0); + input_set_abs_params(ts->input, ABS_MT_POSITION_Y, + 0, ts->info.y_max, 0, 0); + input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0); + input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->info.x_res); + input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->info.y_res); + + input_set_drvdata(ts->input, ts); + + error = input_mt_init_slots(ts->input, MAX_TOUCH_NUM, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(&client->dev, + "failed to initialize MT slots: %d\n", error); + return error; + } + + error = input_register_device(ts->input); + if (error) { + dev_err(&client->dev, + "unable to register input device: %d\n", error); + return error; + } + + error = devm_request_threaded_irq(&client->dev, client->irq, NULL, + raydium_i2c_irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + client->name, ts); + if (error) { + dev_err(&client->dev, "Failed to register interrupt\n"); + return error; + } + + error = sysfs_create_group(&client->dev.kobj, &raydium_attribute_group); + if (error) { + dev_err(&client->dev, "failed to create sysfs attributes: %d\n", + error); + return error; + } + + error = devm_add_action(&client->dev, + raydium_i2c_remove_sysfs_group, ts); + if (error) { + raydium_i2c_remove_sysfs_group(ts); + dev_err(&client->dev, + "Failed to add sysfs cleanup action: %d\n", error); + return error; + } + + return 0; +} + +static void __maybe_unused raydium_enter_sleep(struct i2c_client *client) +{ + static const u8 sleep_cmd[] = { 0x5A, 0xff, 0x00, 0x0f }; + int error; + + error = raydium_i2c_send(client, CMD_ENTER_SLEEP, (u8 *)sleep_cmd, + sizeof(sleep_cmd)); + if (error) + dev_err(&client->dev, + "Send sleep failed: %d\n", error); +} + +static int __maybe_unused raydium_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct raydium_data *ts = i2c_get_clientdata(client); + + /* Command not support in BLDR recovery mode */ + if (ts->boot_mode != RAYDIUM_TS_MAIN) + return -ENOMEM; + + disable_irq(client->irq); + + if (device_may_wakeup(dev)) { + raydium_enter_sleep(client); + + ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0); + } else { + raydium_i2c_power_off(ts); + } + + return 0; +} + +static int __maybe_unused raydium_i2c_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct raydium_data *ts = i2c_get_clientdata(client); + + if (device_may_wakeup(dev)) { + if (ts->wake_irq_enabled) + disable_irq_wake(client->irq); + raydium_i2c_sw_reset(client); + } else { + raydium_i2c_power_on(ts); + raydium_i2c_initialize(ts); + } + + enable_irq(client->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(raydium_i2c_pm_ops, + raydium_i2c_suspend, raydium_i2c_resume); + +static const struct i2c_device_id raydium_i2c_id[] = { + { DEVICE_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, raydium_i2c_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id raydium_acpi_id[] = { + { "RAYD0001", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, raydium_acpi_id); +#endif + +#ifdef CONFIG_OF +static const struct of_device_id raydium_of_match[] = { + { .compatible = "raydium,rm32380",}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, raydium_of_match); +#endif + +static struct i2c_driver raydium_i2c_driver = { + .probe = raydium_i2c_probe, + .id_table = raydium_i2c_id, + .driver = { + .name = "raydium_ts", + .pm = &raydium_i2c_pm_ops, + .acpi_match_table = ACPI_PTR(raydium_acpi_id), + .of_match_table = of_match_ptr(raydium_of_match), + }, +}; + +module_i2c_driver(raydium_i2c_driver); + +MODULE_AUTHOR("Raydium"); +MODULE_DESCRIPTION("Raydium I2c Touchscreen driver"); +MODULE_LICENSE("GPL v2"); -- 2.1.2