From mboxrd@z Thu Jan 1 00:00:00 1970 From: HS Liao Subject: [PATCH v8 1/3] dt-bindings: soc: Add documentation for the MediaTek GCE unit Date: Mon, 30 May 2016 11:19:55 +0800 Message-ID: <1464578397-29743-2-git-send-email-hs.liao@mediatek.com> References: <1464578397-29743-1-git-send-email-hs.liao@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1464578397-29743-1-git-send-email-hs.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Rob Herring , Matthias Brugger Cc: Daniel Kurtz , Sascha Hauer , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org, Sascha Hauer , Philipp Zabel , Nicolas Boichat , CK HU , cawa cheng , Bibby Hsieh , YT Shen , Daoyuan Huang , Damon Chu , Josh-YC Liu , Glory Hung , Jiaguang Zhang , HS Liao List-Id: devicetree@vger.kernel.org This adds documentation for the MediaTek Global Command Engine (GCE) unit found in MT8173 SoCs. Signed-off-by: HS Liao Acked-by: Rob Herring --- .../devicetree/bindings/soc/mediatek/gce.txt | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/mediatek/gce.txt diff --git a/Documentation/devicetree/bindings/soc/mediatek/gce.txt b/Documentation/devicetree/bindings/soc/mediatek/gce.txt new file mode 100644 index 0000000..eff07e2 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/gce.txt @@ -0,0 +1,34 @@ +MediaTek GCE +=============== + +The Global Command Engine (GCE) is used to help read/write registers with +critical time limitation, such as updating display configuration during the +vblank. The GCE can be used to implement the Command Queue (CMDQ) driver. + +Required properties: +- compatible: Must be "mediatek,mt8173-gce" +- reg: Address range of the GCE unit +- interrupts: The interrupt signal from the GCE block +- clock: Clocks according to the common clock binding +- clock-names: Must be "gce" to stand for GCE clock + +Required properties for a client device: +- mediatek,gce: Should point to the respective GCE block + +Example: + + gce: gce@10212000 { + compatible = "mediatek,mt8173-gce"; + reg = <0 0x10212000 0 0x1000>; + interrupts = ; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + }; + +Example for a client device: + + mmsys: clock-controller@14000000 { + compatible = "mediatek,mt8173-mmsys"; + mediatek,gce = <&gce>; + ... + }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html