From: Kedareswara rao Appana <appana.durga.rao-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
appanad-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org,
laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org,
luis-HiykPkW1eAzzDCI4PIEvbQC/G2K4zDHf@public.gmane.org,
svemula-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
anirudh-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
punnaia-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v10 1/2] Documentation: DT: dma: Add Xilinx zynqmp dma device tree binding documentation
Date: Wed, 1 Jun 2016 12:53:58 +0530 [thread overview]
Message-ID: <1464765839-29018-1-git-send-email-appanad@xilinx.com> (raw)
Device-tree binding documentation for Xilinx zynqmp dma engine
used in Zynq UltraScale+ MPSoC.
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Punnaiah Choudary Kalluri <punnaia-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Kedareswara rao Appana <appanad-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
---
Changes in v10:
- Added Rob Acked-by in the commit message.
Changs in v9:
- Removed include sg runtime configuration parameter
from the binding doc as suggested by Lars.
Changes in v8:
- Removed all the software runtime configuration parameters
from the binding doc as suggested by the Lars.
Changes in v7:
- None.
Changes in v6:
- Removed desc-axi-cache/dst-axi-cache/src-axi-cache properties
from the binding doc as it allow broken combinations when dma-coherent
is set as suggested by Rob.
- Fixed minor comments given by Rob related coding(lower case DT node name).
Changes in v5:
- Use dma-coherent flag for coherent transfers as suggested by rob.
- Removed unnecessary properties from binding doc as suggested by Rob.
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- None.
.../devicetree/bindings/dma/xilinx/zynqmp_dma.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
new file mode 100644
index 0000000..a784cdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
@@ -0,0 +1,27 @@
+Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
+memory to device and device to memory transfers. It also has flow
+control and rate control support for slave/peripheral dma access.
+
+Required properties:
+- compatible : Should be "xlnx,zynqmp-dma-1.0"
+- reg : Memory map for gdma/adma module access.
+- interrupt-parent : Interrupt controller the interrupt is routed through
+- interrupts : Should contain DMA channel interrupt.
+- xlnx,bus-width : Axi buswidth in bits. Should contain 128 or 64
+- clock-names : List of input clocks "clk_main", "clk_apb"
+ (see clock bindings for details)
+
+Optional properties:
+- dma-coherent : Present if dma operations are coherent.
+
+Example:
+++++++++
+fpd_dma_chan1: dma@fd500000 {
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xFD500000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 117 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ dma-coherent;
+};
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-06-01 7:23 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-01 7:23 Kedareswara rao Appana [this message]
2016-06-01 7:23 ` [PATCH v10 2/2] dmaengine: Add Xilinx zynqmp dma engine driver support Kedareswara rao Appana
2016-06-07 7:08 ` Vinod Koul
2016-06-08 7:40 ` Appana Durga Kedareswara Rao
[not found] ` <C246CAC1457055469EF09E3A7AC4E11A4A5B4FA9-4lKfpRxZ5enZMOc0yg5rMog+Gb3gawCHQz34XiSyOiE@public.gmane.org>
2016-06-13 5:50 ` Vinod Koul
2016-06-14 8:18 ` Appana Durga Kedareswara Rao
2016-06-15 16:50 ` Vinod Koul
2016-06-16 7:19 ` Appana Durga Kedareswara Rao
2016-06-21 15:41 ` Vinod Koul
2016-06-21 16:19 ` Punnaiah Choudary Kalluri
2016-06-21 16:38 ` Vinod Koul
2016-06-21 17:29 ` Punnaiah Choudary Kalluri
[not found] ` <03CA77BA8AF6F1469AEDFBDA1322A7B74A18BB82-4lKfpRxZ5ekkx2a1wsGfbYg+Gb3gawCHQz34XiSyOiE@public.gmane.org>
2016-06-28 4:14 ` Vinod Koul
2016-06-29 3:59 ` Punnaiah Choudary Kalluri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464765839-29018-1-git-send-email-appanad@xilinx.com \
--to=appana.durga.rao-gjffaj9ahvfqt0dzr+alfa@public.gmane.org \
--cc=anirudh-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=appanad-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=luis-HiykPkW1eAzzDCI4PIEvbQC/G2K4zDHf@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=punnaia-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=svemula-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).