From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: [PATCH 3/3] ARM: dts: sun6i: The blue led on the Mele M9 is a power led Date: Sun, 5 Jun 2016 14:23:13 +0200 Message-ID: <1465129393-22379-3-git-send-email-hdegoede@redhat.com> References: <1465129393-22379-1-git-send-email-hdegoede@redhat.com> Return-path: In-Reply-To: <1465129393-22379-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Chen-Yu Tsai , Maxime Ripard Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree , Hans de Goede List-Id: devicetree@vger.kernel.org The blue led on the Mele M9 is wired to light up as soon as the board has powered (it will be on while the gpio is still in input / floating mode), also its location on the top-set box clearly signals "power led". Until now we've been treating this as a generic usr function led, which means that when you plug power into the top-set box, the power-led lights and then turns off as soon as the kernel loads, which looks wrong. This renames the led from m9:blue:usr to m9:blue:pwr and marks it as default on, fixing this. Signed-off-by: Hans de Goede --- arch/arm/boot/dts/sun6i-a31-m9.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 6e0e5687..66d29b8 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -65,8 +65,9 @@ pinctrl-0 = <&led_pins_m9>; blue { - label = "m9:blue:usr"; + label = "m9:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html